Recent content by Canadian chevy

  1. C

    What have you done to your square lately??

    After months of being inactive i have finally finished my truck (for now). Over the course of several months my dad and I have done everything from replace all the rust replace all the damaged body panels even cut a long box into a short box. I personally primed painted and did the body work...
  2. C

    In Need of Some wisdom

    Be careful when welding those holes on the rear of the cab. My previous owner I'm assuming did the same thing with the speakers so when I went to weld the holes it was hard not to burn bigger holes in the cab even on te lowest heat setting.
  3. C

    Cracked frame

    Truck bed box sorry about the confusion.
  4. C

    Cracked frame

    My frame is cracked on top and goes into a hole where the box gets bolted down. How do I go about fixing this or any ideas?
  5. C

    Would it work?

    I figured out the lengths to cut and where to cut so I measured it and taped it so I'd have straight consistent lines however I've ran into a problem I believe. Once I got to the bottom I realized that the bottom would not line up excuse it slopes in the back or I don't think it will. I've...
  6. C

    Would it work?

    I've searched and searched for where and how much to cut I haven't found them so I'm just going to have to measure dozens of times and cut once. I picked the truck up Saturday for 300$ and tonight we got it unbolted and ready to take off with the engine lift.
  7. C

    Would it work?

    It's not as simple as just cutting the front I believe you have to cut a couple sections out of it
  8. C

    Would it work?

    Alright thanks for the help ill think it over more tomorrow if its worth my time and effort.
  9. C

    Would it work?

    So I've ran into a slight problem midway through my build. I currently got a 76 k10 single cab shortbox the problem is I need a new box and I can't get aftermarket box sides in Canada so I went looking for a donor truck. I found a 85 c10 single cab long box for 350$ with a good condition box...
  10. C

    Expanded cab?

    Ill try that tomorrow thanks for the advice.
  11. C

    Expanded cab?

    So I'm redoing my cab corners,floor,rocker panels and floor supports this summer. I've been trying to mock my rocker panel into place but its wont fit due to its shortness. I also forgot to brace my cab when I cut them out so I'm thinking that the cab expanded when I cut my rocker out. Any ideas...
  12. C

    New Guy from the North

    Welcome aboard! As for the filler neck off the box I got one I don't need.
  13. C

    Hidden fuel tank filler door?

    I found a picture of it done on a 81 blazer they said and it looks really clean it should be the same as on a truck bed?
  14. C

    Hidden fuel tank filler door?

    Once I do this (sometime hopefully before August) ill tell you what I did and what hinge worked best and what not.
  15. C

    Hidden fuel tank filler door?

    Or just a really strong hinge in general I'm just trying to think of one that's strong and not very big but the camaro license plate hinge would do the trick.
See more

Latest posts

Forum statistics

Threads
42,322
Posts
913,633
Members
33,819
Latest member
guillermoariast
Top