Recent content by 88SUB

  1. 88SUB

    Replacing bleeder valves

    It's almost like the calipers are different. I mean if they have different size bleeder screws that's just weird, but yeah they could be two different brands or something, I don't know. Maybe I should just buy me some new calipers. They aren't that expensive.
  2. 88SUB

    Replacing bleeder valves

    I pretty much did gravity bleed because I had the bleeders off and I went through a lot of fluid just letting it gravity bleed. There must be air getting somewhere but it's just too weird that it's opposite sides front and back that are doing it.
  3. 88SUB

    Replacing bleeder valves

    Well no it's a completely different size altogether You can see the different sizes that I've got there one size was for the front one size was for the rear and the front I put that larger one on on the driver's side which would mean that the passenger side would get the same size and it's not...
  4. 88SUB

    Replacing bleeder valves

    This is more of a "WTF?" I've been having issue with squishy brakes.replaced leaking master cylinder.went to bleed brakes as usual but they're not bleeding properly. Rear driver no matter how much bleeding, still lots air. Rear passenger, straight fluid. Rear are drum. As for the front (disc)...
  5. 88SUB

    Adding new battery cables and terminals

    I was thinking about just using a regular ring connector, but was worried about any spinning even when tightened. I guess I'll just go this route.
  6. 88SUB

    Adding new battery cables and terminals

    As of now, I'd just have main power, CB power, and 1 LED bar power. I may add other LED pods/bar later. On that starter terminal, yeah I cant find anywhere that carries it. New starters don't have that terminal need so I guess I'll have to make my own. My main reason on terminals with a few...
  7. 88SUB

    Adding new battery cables and terminals

    I recently got a new battery and figured since I didn't use the side post style battery truck came with (including side post style connection terminals), I'll need to replace original cables for top mount. Few things. I need new battery terminals but not sure if I should use terminals with a...
  8. 88SUB

    Power Window Harnesses

  9. 88SUB

    Power Window Harnesses

    I'm in need of new PW harnesses. Not sure where to buy them. Mine are toasted. Corrosion. Also might as well find new switch for all doors as they are loose and some need special position just in the right spot, to work.
  10. 88SUB

    Seat Swap?

    Sounds totally practical....
  11. 88SUB

    Seat Swap?

    So my front seats are just hammered. Flat. Ripped. Side metal framing exposed. I need new seats! Now my question is, if I walk into a wrecking yard, what sort of 'newer' truck can I look at that will have some comfortable seats I can put in place of my current seats, preferably without having...
    • 88SUB
    • Thread
    • Replies: 9
    • Forum: Seats
  12. 88SUB

    Wheel bearing exploded!

    So now my other side, which never had issue (Rear pass) is now leaking. I'm wondering if I did not press bearing on enough? What is this I see in some videos that people use Permatex near seal to prevent leaks?
  13. 88SUB

    Wheel bearing exploded!

    Thanks guys. My concern was not tight enough or too tight and smash my seal and add unwanted pressure to the bearings, causing them to lock up and explode again.
  14. 88SUB

    Wheel bearing exploded!

    Anybody else? Want to try and take her for a spin this weekend and not burn up my bearings again
  15. 88SUB

    Wheel bearing exploded!

    I thought the same and currently have it at 35lb/ft but the place I bought the bearings from gave me a number of 75-85lb/ft I should mention that my axle shaft is 35 spline and 6 lug
See more

Latest posts

Forum statistics

Threads
42,178
Posts
910,778
Members
33,675
Latest member
johnalen76
Top