Read
Member
- Joined
- May 26, 2019
- Posts
- 37
- Reaction score
- 1
- Location
- Phoenix
- First Name
- Brandon
- Truck Year
- 1985
- Truck Model
- C10
- Engine Size
- 350
85 c10--having issue with A/C blend door. Door #1 appears to be working fine through various modes(ie. heat, bi-level, vent, defrost,etc.) however when I turn to Norm or Max a/c door number 1 goes to the correct position however door #2, which is connected to door #1 via a threaded rod on top of heater box, does not open entirely. This is causing weak air flow to vents. I am able to move door#2 into place and air flow is fine. Any suggestions on how to fix this issue. Door #2 has a rod that goes through it and I am able to move the door independent of the rod which I don't think I should be able to do. This could be causing the issue since door 2 should move into place once door #1 opens all the way. Picture attached
Any suggestions??
2nd question--should there be a noticeable difference in air flow from Norm a/c to Max?
Any suggestions??
2nd question--should there be a noticeable difference in air flow from Norm a/c to Max?
You must be registered for see images attach