Radiator Support Bushings: Is this correct?

[Toad455]

Hello All. I have a set of Energy Suspension cab and radiator support bushings # 4109G. The cab bushings fit but the support bushings seem to be wrong. See the pics. The hole in the frame is quite a bit larger than the center of the bushing. The support can slide around quite a bit. I haven't tightened it down all the way but I feel that even tight it will be able to slide. The truck is a 78 2wd. Anyone used these before with success?
the

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[Sad Sack]

I came up with these:

Pardon Our Interruption

You must be registered for see images attach

Look diff than what you are showing.

Don't even see Energy Suspension support mounts on their site alone just the body mount kit.

 

[nvrenuf]

What’s the complete kit part number?

 

[legopnuematic]

You must be registered for see images attach

 

[straydog371]

Not certain, but it appears the holes have been slightly enlarged by someone?
I bought a set from LMC when I replaced mine:
https://www.lmctruck.com/body-components/body-mounting/cc-1973-87-polyurethane-cab-mount-bushing-set

@legopnuematic was typing same time as me and has the likely solution.
Good luck!

You must be registered for see images attach

 

[legopnuematic]

I can measure on my 79 when I get a chance, I am using energy suspension body mounts.

To hold us over until then, here is an old photo of my 79s frame.

You must be registered for see images attach