help with wilwood install

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Daniel Salgado

Junior Member
Joined
Jun 6, 2018
Posts
1
Reaction score
0
Location
San Antonio
First Name
Daniel
Truck Year
1983
Truck Model
C10
Engine Size
350
1983 C10 Just did wilwood rear disc brake conversion along with front wilwood rotors and calipers ,replacing master with proportioning valve, The inlet on the proportion valve is set up for 3/16” for front and rear, The original lines are 1/4” inch and 3/16”what would be the best solution?I’ve been searching for some kind of
adapter to step down the quarter inch line but I haven’t found one, Any help would be appreciated thank you in advance

You must be registered for see images attach
 

eskimomann209

Full Access Member
Joined
Jan 9, 2019
Posts
1,849
Reaction score
1,998
Location
Modesto
First Name
Marcus
Truck Year
1973
Truck Model
C10
Engine Size
5.3
You don’t step down “the line” you step down or up the flare fittings with adapters.
Find what thread and pitch your line fittings are then find what the Wilwood prop needs. Thread the adapters into the wilwood then the lines into the adapters.

Are you keeping the stock prop valve in its location?
 

Forum statistics

Threads
41,851
Posts
903,487
Members
33,365
Latest member
rossivey
Top