Help with engine hose identification 1982 Chevy C10 4.1L

[Brownie82C10]

Hello. I need to replace a formed (factory-bent) engine hose on my 1982 C10, but I first need help identifying its name and its function. It's a thick hose, about 10 to 12 inches long and about 1 1/8 in diameter. It comes from the middle of the value cover area on the right-hand side of the straight-6 block and attaches to a 1 3/4-inch-long hose port on the bottom left of the air filter housing. Does anyone have any clues about this? It might be a vacuum or emissions-related hose. Thank you.

 

[K201979]

Crankcase breather vent tube

 

[MikeB]

Thought you might like this, if yours is gone. It's for a 1982 C10 with 250 six non-California.

You must be registered for see images

 

[Brownie82C10]

Thank you, MikeB and K201979, for your help with this. Thanks to you, I found a replacement hose, ordered it and should have it by Thursday. – Brownie82C10

 

[Arkansas_V8]

Crankcase breather vent tube

Thought you might like this, if yours is gone. It's for a 1982 C10 with 250 six non-California.

You must be registered for see images

You two swooping in like hero's! You both deserve pats on the back.

Good darn job, I am proud of y'all fellow forum members/heroes!


Lol, ignore the idiot on the pills.