few parts I'm looking for?

houghdan89

Junior Member
Joined
Apr 14, 2022
Posts
3
Reaction score
1
Location
Waterloo, Wi
First Name
Daniel
Truck Year
1985
Truck Model
C10 long box
Engine Size
350 small block
I'm looking for the body chrome trim i plan on two tone paint job by next spring/summer I would like to have truck primed by fall this year. The chrome body trim my c10 is an 85 long box. Wondering about 5 bolt rally wheels. I was also having issues opening my tailgate currently its shut and I cannot get it open anyone have any ideas besides Sawall. There are few badges also I will look at what I need. Also bed rails black or chrome I'm not picky they can need to be cleaned up. I maybe need suggestions on muffler cans for my truck also I ordered headers I would like to run straight pipes back to muffler and tip the ends. Thank you everyone let me know what you got.
 

Harold Strickland

Full Access Member
Joined
Nov 25, 2020
Posts
56
Reaction score
65
Location
Dunn, NC
First Name
Harold
Truck Year
1979
Truck Model
C20 Crew
Engine Size
350
Try pushing against the tailgate while pulling the handle to release. If this doesn't work then take a #2 Flathead through the gap between the tailgate and bedside and release the latch(es).

Strickland
 

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
3,506
Reaction score
4,735
Location
Washington
First Name
Todd
Truck Year
1986
Truck Model
K20
Engine Size
454
Everywhere from Amazon to every classic car parts house has the lower chrome trim. Either by the roll, or precut for a few bucks more.
 

AyWoSch Motors

The Parts Guy
Joined
Nov 6, 2020
Posts
2,507
Reaction score
5,631
Location
New Mexico
First Name
Ayden
Truck Year
1986
Truck Model
K1500 Sierra Classic
Engine Size
305ci V8
I'm looking for the body chrome trim i plan on two tone paint job by next spring/summer I would like to have truck primed by fall this year. The chrome body trim my c10 is an 85 long box. Wondering about 5 bolt rally wheels. I was also having issues opening my tailgate currently its shut and I cannot get it open anyone have any ideas besides Sawall. There are few badges also I will look at what I need. Also bed rails black or chrome I'm not picky they can need to be cleaned up. I maybe need suggestions on muffler cans for my truck also I ordered headers I would like to run straight pipes back to muffler and tip the ends. Thank you everyone let me know what you got.
I could possibly get trim, i have tailgate hardware, I have wheels, and I have quite a few emblems....
 

houghdan89

Junior Member
Joined
Apr 14, 2022
Posts
3
Reaction score
1
Location
Waterloo, Wi
First Name
Daniel
Truck Year
1985
Truck Model
C10 long box
Engine Size
350 small block
Ok brother I'm having back surgery next week Wednesday they tell I should be able to go right back to work 2 days after goal was to get motor running mint again and I'm hoping things will go well with surgery I will need to work out a number and figure out shipping my brother-in-law is a truck driver he does get that way once and while but thank you for reaching out.
 

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
3,506
Reaction score
4,735
Location
Washington
First Name
Todd
Truck Year
1986
Truck Model
K20
Engine Size
454
Not sure it's really worth using recycled peel n stick lower trim molding. Would have to find good pieces (most all old stuff on trucks is weathered or yellowed and would have to get good long pieces for doors bed sides and tailgate) It's still only $107 on Amazon for a full roll, enough to do the whole truck, but looks like alot of places are $150-200 especially for the pre cut kits)

That said, anyone near me needs some pieces, I have a whole trucks worth that I took off (chrome, not black) that could replace probably half the pieces or more on a truck with a few messed up pieces. Come get it or it'll be in the garbage can before too long.
 

wlwarnke

Full Access Member
Joined
Sep 14, 2021
Posts
85
Reaction score
124
Location
Helotes, TX
First Name
William
Truck Year
1983
Truck Model
K5
Engine Size
5.7
I used this on my 83 K5. It matches the metal corners perfectly. I make a point to put some 303 on it every time I wash the old girl and it still looks good 2 years later living out in the Texas sun.

 

Latest posts

Forum statistics

Threads
36,142
Posts
763,447
Members
25,273
Latest member
juliannv07
Top