Cowl rust and how can I fix it?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Joe Watkins

Junior Member
Joined
Sep 20, 2018
Posts
5
Reaction score
0
Location
Willis texas
First Name
Joe
Truck Year
1982
Truck Model
C10
Engine Size
350
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Working on my wifes 82 short bed and I finally found my water leak. Under the windshield cowl where the wiper linkage is there is a huge hole at the firewall. Ill try to post pics. Anyone know what im talking about or how to fix it?
 

eskimomann209

Full Access Member
Joined
Jan 9, 2019
Posts
1,849
Reaction score
1,998
Location
Modesto
First Name
Marcus
Truck Year
1973
Truck Model
C10
Engine Size
5.3
I have a similar repair on mine. Yours is more similar to @legopnuematic ‘s however....
I’m not sure if you expect any other answer than
You gotta cut and weld. And that’s one of the most “fun” spots. You need to remove your booster, steering shaft/ column get everything out of the way so you can cut that from the engine bay.
But honestly I’d pull the cab off.
You also need to remove the jute interior wall backing move wires .....
basically have a lot of fun.
That’s the only right way to do this.
That body caulk sucked. I chipped all mine out and resealed it after I was done.
I used gorilla construction adhesive !
 

legopnuematic

Licensed Junk Dealer
Supporting Member
Joined
Oct 27, 2016
Posts
1,709
Reaction score
3,660
Location
MO
First Name
Spencer
Truck Year
1971, 1̶9̶7̶4, 1976, 1979,1̶9̶8̶5, 2002
Truck Model
Dart Swinger, Sierra 10, C10 Cheyenne, C10 Big Ten, Silverado 10, Ram 2500
Engine Size
225/6, 350 c.i., 350 c.i., 5.9l Cummins
For the correct repair, @eskimomann209 is right in that you have to cut out the ugly and weld in new metal. On my 79 I had to redo most of the firewall, the area around the heater box, the piece above it, the mating area behind the engine, the piece above it, the piece behind the brake booster and the piece above it. Luckily the patches are pretty simple but still a pain in the rear if the truck isn't blown apart already. The most complicated piece is the curve behind the enigne, as putting a curve in a 1 inch radius isn't really easy without a metal stretcher (what I used)
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
 

Joe Watkins

Junior Member
Joined
Sep 20, 2018
Posts
5
Reaction score
0
Location
Willis texas
First Name
Joe
Truck Year
1982
Truck Model
C10
Engine Size
350
Yea i have rusty rockers, cab corners, inner rockers, and floor supports. I think i may try to fix it while looking for another cab. Give me some practice anyways. Thanks for the pics
 

legopnuematic

Licensed Junk Dealer
Supporting Member
Joined
Oct 27, 2016
Posts
1,709
Reaction score
3,660
Location
MO
First Name
Spencer
Truck Year
1971, 1̶9̶7̶4, 1976, 1979,1̶9̶8̶5, 2002
Truck Model
Dart Swinger, Sierra 10, C10 Cheyenne, C10 Big Ten, Silverado 10, Ram 2500
Engine Size
225/6, 350 c.i., 350 c.i., 5.9l Cummins

roundhouse

Full Access Member
Joined
Apr 5, 2014
Posts
669
Reaction score
527
Location
atlanta ga
First Name
justin
Truck Year
77,78,79,80 ?
Truck Model
K10
Engine Size
350
If the rest of the truck is rusted outs too

I’d Scrub it good with a rag soaked in acetone or gasoline

Use some good urethane caulk and maybe a small patch panel embedded in the urethane to plug the holes and atop the leak and move on to the next problem
 

Joe Watkins

Junior Member
Joined
Sep 20, 2018
Posts
5
Reaction score
0
Location
Willis texas
First Name
Joe
Truck Year
1982
Truck Model
C10
Engine Size
350
I looked through ur build, that truck was way worse off than mine. I think I can fix this. Another thought.. My truck is a factory non ac truck. So another pro for cab swap
 

Latest posts

Forum statistics

Threads
41,857
Posts
903,628
Members
33,370
Latest member
mitchell1128
Top