Special_Ed
Junior Member
- Joined
- Jul 27, 2021
- Posts
- 1
- Reaction score
- 0
- Location
- SoCal
- First Name
- Ed
- Truck Year
- 1977
- Truck Model
- c10
- Engine Size
- 350
Working on finish work for another shop. It is a body off restoration 77 C10 and trying to finish up the AC system for it. I have the basic wiring diagram but dont seem to have power to the switch panel. By the diagram it looks to have brown wire 50a from the inst panel harness that i am assuming should be the power feed to the unit. all the instruments and lights are working.
Next there is a #52 orange wire that is not attached to anything at the connector. By the diagram looks like it does not go to anything either, just confirming.
Not quite sure what i am missing since i have not worked on these for close to 30 years now and my memory is long gone.
Next there is a #52 orange wire that is not attached to anything at the connector. By the diagram looks like it does not go to anything either, just confirming.
Not quite sure what i am missing since i have not worked on these for close to 30 years now and my memory is long gone.
