85 c20 parts

[1984dually]

Bought this for the steering column. Drivetrain still intact. 350/sm465. Has hyd clutch system. Cab is rust free. 14 bolt w/4.10 gears. Front disc make a good upgrade for a pre 70 3/4 ton

 

[SirRobyn0]

Well I definitely have somethings I'd be interested in, trouble is we are 500 miles apart and it's mostly big stuff. So you'd have to put the items and ship or????

Main thing I'd really want would be the rear end followed by in order:
rear springs
both portions of the driveshaft,
the engine (assuming it is a good runner, if not or you don't know then I'd probably pass),
I'd possibly be interested in the clutch system and transmission, but I'm betting by the time I buy the other stuff my wallet will be empty. So let me know if you'd want to pull parts and ship. Obviously I'll pay for the parts and shipping.

 

[bucket]

I may be interested in the clutch pedal setup with the reservoir, master, slave, hose, etc. I don't believe I would need the bellhousing.

 

[1984dually]

Well I definitely have somethings I'd be interested in, trouble is we are 500 miles apart and it's mostly big stuff. So you'd have to put the items and ship or????

Main thing I'd really want would be the rear end followed by in order:
rear springs
both portions of the driveshaft,
the engine (assuming it is a good runner, if not or you don't know then I'd probably pass),
I'd possibly be interested in the clutch system and transmission, but I'm betting by the time I buy the other stuff my wallet will be empty. So let me know if you'd want to pull parts and ship. Obviously I'll pay for the parts and shipping.

Engine is supposed to be good. Will know in a couple days. No problem shipping the stuff. About 10 hrs drive for you. You can also come get the whole truck. Have title. Give me a couple days to ck out the engine and we’ll go from there.

 

[1984dually]

I may be interested in the clutch pedal setup with the reservoir, master, slave, hose, etc. I don't believe I would need the bellhousing.

Rather sell as a complete change over but will part out the stuff if have any interest in other parts(trans,housing, etc). Thanks

 

[SirRobyn0]

Engine is supposed to be good. Will know in a couple days. No problem shipping the stuff. About 10 hrs drive for you. You can also come get the whole truck. Have title. Give me a couple days to ck out the engine and we’ll go from there.

Thanks, I've been down that way. Well not really to exactly where you are at, but I've been to Klamath falls a number of times. It's not 10 hours anymore, unless maybe if the trip is done at night, coming from where I'm at I need to go though Tacoma, Olympia and Portland. If I had any plan on coming down that way I'd let you know when and we'd work that out, But I don't and two days of driving gas, hotel and time away from the farm all adds up. On my end I have business address to ship to and folk lift which may help with the charges. But yea, let me know what the parts I'm interested in are like, and what you'd want for price and well take it from there. Thanks again take your time.

 

[1984dually]

Got the engine fired up today. Poored some gas into the vent and it started right up. Sounded pretty good with no funny noises. Going to run a line from the fuel pump into a gas can and run it some more. Can’t run it long as the radiator has been removed. Also pulled the rear cover off the diff and it looks fine(4.10). You can call/text me at 541-281-2409 if you like. Open to offers. Sure we can work something out. Thanks

 

[SirRobyn0]

Got the engine fired up today. Poored some gas into the vent and it started right up. Sounded pretty good with no funny noises. Going to run a line from the fuel pump into a gas can and run it some more. Can’t run it long as the radiator has been removed. Also pulled the rear cover off the diff and it looks fine(4.10). You can call/text me at 541-281-2409 if you like. Open to offers. Sure we can work something out. Thanks

I will text you but might not be until tomorrow. I am VERY interested and want to work out a deal. Just to be clear I'd like confirmation that the differential is the 14 bolt full floater. Thanks. If it's not to much trouble can you snap and engine pic too?

 

[1984dually]

Added a picture of the engine but the rear is a semi float axle.

 

[SirRobyn0]

Engine looks awesome to me, for old and used anyway, seriously looks great for what it is. I will think a little about the rear end. I'm really looking to go to the full float, but it has better gears than mine (I have 3.41) try towing a trailer with that and a 305. Going to 4.10 would really be great though. So I will give the rear end some though and catch up with you tomorrow on that.

 

[SirRobyn0]

@1984dually I'll send you a PM later tonight. Forgot we had something going on at work plus we had a bit of weather event today, so sorry I did not get in touch with you, but don't want you to think I'm flaking. I'll PM you later tonight when I get done with some farm stuff that I've got to get done tonight and hopefully hook up tomorrow.

 

[1984dually]

I may be interested in the clutch pedal setup with the reservoir, master, slave, hose, etc. I don't believe I would need the bellhousing.

Would sell clutch pedals,hydraulics, and bell housing for 350 plus shipping.

 

[bucket]

Would sell clutch pedals,hydraulics, and bell housing for 350 plus shipping.

My timing is terrible, lol. Just bought a truck so my parts money has dwindled significantly. Would you be willing to sell without the bellhousing? I just need the pedal assembly and the hydraulics, the bellhousing would just be an added expense since I have extras already.

I just noticed in the pictures that there appears to be factory mufflers and tailpipes installed still. I don't know what your plans are but don't scrap those, there's probably someone out there that's looking really hard for those.

 

[1984dually]

Thanks for the heads up on the exhaust. Have sold the complete setup. Thanks