Discussion in '4wd Pick-Ups K10 K1500 V10 V1500' started by Westislander, Nov 9, 2018.
The part number for the Steering Arm Washers is GM 3965138. They're about $13 each.
These freaking S U C K !!!!
Well, it only took about a week.... drench, beat, repeat..... but the steering arm is off!
Started to disassemble the hubs.... after going through just about every single hex wrench I own I determined that the hubs have a 7/64 hex bolts holding them on
Got the locking hubs off only to realize don’t own a socket to remove the spindle nut
You can usually rent the socket from an auto parts store. I don't think it's more than $20 to buy one.
Just buy one, this isn't the last time you're gonna need it!!
Got one, worked perfectly
So the passengers side dust shield is roached. Do they sell new ones?
Is the center hub shield on this supposed to be on both sides? Only the drivers side had one
I'm wondering if they do as well. Need some of my 82 K10.
Where did you get all of your Axle, Hubs, Suspension parts? I wanted to stay closest to Genuine as possible.
Summer has been so busy I haven’t been able to do as much as I would like to the K10. I finally got the front end disassembled to sand blast
Summer has been so busy, finally got back to work an painted the front end in POR15
Slowly pecking away at the front end
I got the front end rebuilt and almost ready for paint. I need to sandblast and prime the the mounting pad from the sway bar
Separate names with a comma.