Search results

  1. Jrgunn5150

    Ground to gas tank?

    Is that a thing? My 91 cluster in my 79, fuel gauge reads past full, 3 o'clock, at all times. Cleaned ground, ran it straight to the battery, no changes either way. This is a new 87 sender in a new 87 tank. Idk where else to look without dropping the tank back down.
  2. Jrgunn5150

    Car Cover

    I'd like to get one on Daryl before I jam it in the barn for the winter. Does anyone have one they like? That fits a shortbed? My last one my nephew got me and it didn't cover the whole truck, it's totally tattered now lol.
  3. Jrgunn5150

    Light bucket assembly

    I having a ridiculously difficult time with this. I think I have the wrong bezels or something, because if this light bucket is assembled correctly,then my bezel doesn't line up with the holes at all.
  4. Jrgunn5150

    Drum Brake help

    I'm not really nearly as familiar with drum brakes as I should be. Throughout the years I've tended to just pull it all off and disc swap everything. That was my intention with the C10 as well, but I have no brakes at all now in the rear, and I think that's something I can rectify for like 100...
  5. Jrgunn5150

    Cab floor drains

    79 C10. Under the seat are two holes, that had plugs in them once upon a time. Does anyone know where to find these? I must be using the wrong search terms because I'm getting nowhere.
  6. Jrgunn5150

    C10 power steering lines

    So how many types are there? My truck is a 79, I bought a new line for a 79, and it threaded into the box, but the center hardline portion is very loose, and it leaks like a sieve. The only conclusion I can come too is I must have the wrong line, but I thought the newer stuff was metric? So...
  7. Jrgunn5150

    Wiring tools

    I'm about to embark on a scratch wiring job on my C10 in the next 6 weeks here or so. What tools do you guy's find necessary for good, solid wiring? I have a set of auto strippers, but I don't have any fancy crimpers or anything. Also, I need a source for good spade connectors and whatnot...
  8. Jrgunn5150

    99-07 Silverado Rocker replacement and Liner Extreeme DIY liner.

    Did a couple videos on this, may interest you guy's, I like thic product alot for the DIY guy.
  9. Jrgunn5150

    Radiator support mount bolts

    Coming into the home stretch, starting assembly and putting the front clip on for hopefully the last time soon. Have Prothane Urethane mount bushings en route, but my bolts are long gone. Does anyone know the size of the bolt and nut needed?
  10. Jrgunn5150

    Easiest place to check for power in cab?

    I'm actually attempting to wire my truck correctly this year, and I've hit a bit of a snag. Trying to start simple, because I'm simple lol. So power applied to the upper left wire in this pic, should result in 12v out on the missing wire in the pic correct? It's my understanding that the upper...
  11. Jrgunn5150

    Oil Pressure sending unit

    Can they be mismatched? I have a 90 cluster and a 79 sending unit for a gauge. It's the correct sending unit for a gauge, but not what shows on Rockauto for a 1990 R1500 Suburban. I have part number PS 154. Rockauto says a 1990 takes part number PS 262.
  12. Jrgunn5150

    What tools to remove cluster?

    So, I need some hand holding here. I'm at work, I'm a little over an hour from home, and the Upull here has a 90 Suburban with the electronic dash I need for my LS swap. I've just been driving around with no dash because I don't want to pay 150 for one lol. But for 25 bucks, I'll take it...
  13. Jrgunn5150

    How I got a plasma cutter

    So we were in a accident on the freeway over the weekend. 60 mph another car lost control, clipped my CCLB 8.1 truck, tore up the bumper and the bed. I was pretty bummed, I really like that truck, but I took it as an opportunity to build a new bumper. The rear truck bumper should be pretty...
  14. Jrgunn5150

    1982 Suzuki GS1100G "Preppercycle"

    This is going to be the build document on my 1982 GS1100G. I'm not really a bike guy, I've had a few when I was a teenager, but I was just a rider of them then, so it's unfamiliar territory for me. What really got my wheels turning on this was Daryl's CB750 on The Walking Dead lol. It just...
  15. Jrgunn5150

    Waste oil as trailer deck stain

    I was looking into stain for my trailer, I replaced the deck last fall, and came across people who claim waste oil is the best thing ever, blah de blah. So I gave it a whirl, used a cheap bug sprayer, about a gallon of diesel, and about a gallon of old oil. Dried to the touch in a day, looks...
  16. Jrgunn5150

    Arduino powered fuel injector tester.

    I'm working on an Arduino powered fuel injector flow tester. I started out with a simple wave generator and a timer, but the relay I was using couldn't operate quickly enough, then I burned up the wave generator lol. It seems quite a few people have started on different testers, and either...
  17. Jrgunn5150

    73-80 brackets different from 81-87?

    Basically, as title states, are they different? Because I went and bought a bench and the brackets don't wrap down at the front, they just hang out in the air and the rear bolts don't line up either. And if they are different, can I just go get 73-80 ones and bolt them to the newer bench?
  18. Jrgunn5150

    HP Tuners

    I figured I'll put these in their own thread. I'm starting off with my 2500 HD, since that's what I have to practice on, and I'll go from there.
  19. Jrgunn5150

    Who has rebuilt their vent windows?

    I need to do mine, and I took one apart and it seems kind of complicated lol.
  20. Jrgunn5150

    Some of my daily, 2500HD 8.1

    This is my 3 or 4 day a week driver, Clifford. Clifford is a 2002 CCLB with an 8.1/Allison/4.10 gears. I knew it had been repainted by the fact that it had the wrong front clip on it, I didn't know they had stuffed the cab corners full of cardboard and bondo until it started bubbling. They had...
  21. Jrgunn5150

    Bolt sizes

    Now that I'm closing in on final assembly, I'm of course missing some bolts. If anyone can help me out or direct me to the sizes of the following, Hood to hinge bolts. Seat to floor Seat belt to floor Stepside fender to box ( I think this is 5/8 - 16, but my threads may need chasing.)...
  22. Jrgunn5150

    Got my drums unstuck, now what??

    My shoes had seized to the drum from sitting, I got them unstuck, but now what? I'm not ready to rebuild them or disc swap it, but I need to be able to move it around. So if I just put them back on, how do I stop them from seizing again? Or should I just take the shoes out? Sent from my...
  23. Jrgunn5150

    Rocker replacement

    So I took a vid of what I'm dealing with on my rockers here. I replaced it all once, but the outer rocker was too high, my door scraped. I've seen people say fit the outer to fit the door, but I'm unsure of exactly where to put the A pillar, it can easily go up or down a 1/2 inch without...
  24. Jrgunn5150

    Cab not any time soon

    Willing to travel for a rust free cab, I know some of you guy's part trucks out, so if anyone is sitting on one, I'm looking at making the trip in the summer south to get a cab. I live in Michigan, am willing to travel anywhere up to El Paso or so to get one, as long as it's truly, really...
  25. Jrgunn5150

    Spring hanger

    Found some.

Latest posts

Forum statistics

Threads
41,847
Posts
903,379
Members
33,361
Latest member
iiixtremeiii
Top