Search results

  1. G

    Using stock speedo VSS in place of transfer case output VSS?

    Got an 84 C10 that I'm planning on swapping onto a 4x4 chassis, I'll be using a 94 K3500 TBI harness to swap in the 80e. Originally transfer case in the donor had a VSS on the output shaft, this won't work with the stock speedo add it is cable driven. I've read somewhere before that you could...
  2. G

    serpentine conversion question, regarding AC

    Went and looked at an AC cab today for my plow truck. I'm planning on putting my 90 454 from my ex cab dually in it. I think the cab is mid 80s, and if I remember right the original AC compressor is on the driver side, isn't it? How would I go about hooking up the AC for the engine's passenger...
  3. G

    Hooking AC to 88+ serpentine setup

    Went and looked at an AC cab today for my plow truck. I'm planning on putting my 90 454 from my ex cab dually in it. I think the cab is mid 80s, and if I remember right the original AC compressor is on the driver side, isn't it? How would I go about hooking up the AC for the engine's...
  4. G

    looking for frame dimensions

    Looking for a diagram of frame dimensions, including suspension mounting points and body mount locations for an 80 K20. Anybody know where I might find them?
  5. G

    any luck with World Products or Dart heads?

    I've got a friend who is trying to talk me into trading a set of World Products 200cfm small block cast iron heads. By my research, it looks like they're probably Sportsman IIs, but there us a chance that they're Dart Iron Eagle 200s as well. I'll actually be looking to build a mild small...
  6. G

    audio system for standard cab

    If you guys were going to set up an audio system for a standard cab, how would you set it up? Planning on an 81+ cab so I'll have speakers in the corner of the dash. I have a set of factory speaker mounts from an 86 (~4" fronts, 4x10 rears), an infinity perfect 10" dvc sub, and an Alpine head...
  7. G

    stock height leaf springs

    has anybody here ever bought stock height leaf springs? going to start fresh with my K2500 frame, and need a good source. looking for any input good or bad.
  8. G

    Factory 86 AM/FM Cassette

    I've got a nice factory radio from my 86 C10. 4 speaker radio, manual tune. Worked great when I pulled it several years ago. Very nice piece. $40 plus the ride.
  9. G

    1 ton guys, c'mere for a minute...

    what the heck is this Dana 70 out of? I know it was a Chevy, and I know it was 77 to 79 because it has drive slugs on the front axle. the front is definitely a Dana 60, and definitely dual rear wheel. the rear definitely has me confused though. plainly marked Dana 70. backing plate to backing...
  10. G

    so what options were available in 1977?

    Looking at creature comfort upgrades for my 77, to make it a little more user friendly, as well as period correct. I've got a set of 16.5" Jackman wheels that I'm planning on running, as well as going to a TBI setup (even though it's 10 years too new, still resembles a carb, and it's...
  11. G

    new work truck

    Made a deal on this thing a few months back, and finally brought it home this weekend. Traded a set of 3/4 ton axles with 5.13s in them, and a well worn 465/205 combo for it. 454 runs great, body is surprisingly solid. The bad: right rear wheel is locked up, and the TH400 doesn't respond at...
  12. G

    upgrading your square with a hydraulic clutch

    i've had several guys ask me about swapping a hydro clutch into an automatic truck, or a truck with a factory mechanical clutch. so i thought that this post could be useful in the future. for starters, you need the proper 85-87 hydraulic belhousing. the hydraulic belhousing from an IFS truck...
  13. G

    axles for sale

    Corporate 10 bolt front axle, 3.73 gears, new Warn premium lockouts 3 years ago, has been inside since late 2010. Asking $200 8 lug 14 bolt semi floater from an 87 3/4 ton 2wd. 4.10 gears, open diff. Asking 150
  14. G

    Rebuilding 700r4, any special tools or tips?

    I've built one, but it was back in '99, and it was a school training aid that never got fluid put to it, so I have no clue if I was successful or not. :lol: looking at trans options for an upcoming project, and think that a 700 its going to be the route to go. I know inspection and...
  15. G

    14FF Detroit Locker NEW!

    Just as the title says, new Detroit locker for Gm 10.5 14FF. Installed in an axle, and removed and replaced with a welded set of spider gears before installing the axle in my derby truck. This thing has never even been in gear lube.asking $350 for it.
  16. G

    blasting questions

    Where the best blast media to use to remove paint and plastic body filler from a truck without damaging the metal underneath? I've got a long road ahead of me with my 77 and thought that perhaps blasting it first would be a good start. Of course before blasting the cab, the doors would be...
  17. G

    14Ff Detroit locker NEW

    Just as the title says, new Detroit locker for Gm 10.5 14FF. Installed in an axle, and removed and replaced with a welded set of spider gears before installing the axle in my derby truck. This thing has never even been in gear lube.asking $350 for it. Working on getting pics uploaded.
  18. G

    TBIs

    i've got a few throttle bodies kicking around, just randoms that i've collected over the years.... would be good ones to modify. 87-88 350 (missing upper pod screws, may have them around somewhere) 87-89 305 (missing lower pod screws, if you were installing an injector spacer...
  19. G

    5.13 10 bolt front

    i have a 5.13 geared 10 bolt front with 30 spline inner axle shafts, good gears, open differential, good ujoints. setup for crossover steering with steering arm. at this point i have no outers for it, just a knuckle to knuckle axle. if you would purchase this axle, you would only need to put the...
  20. G

    Saddle Tanks NOT near as dangerous as publicized !!!

    With the saddle tanks, and the NBC tests where they "exploded"... Dateline had to rig the tanks with an ignitor in order to get them to explode... the saddle tank scare was totally fabricated. http://whatreallyhappened.com/RANCHO/LIE/nbc.html
  21. G

    axle swap ujoint information

    i compiled this information for posting on another site, and thought that it may be useful here as well.
  22. G

    Cure for SM465 Sloppy Shifter

    the fix for the sloppy shifter for future searches, and potentially the OP: http://pirate4x4.com/tech/billavista/sm465/index.html
  23. G

    83-87 headlight bezels

    just argent silver, no fancy chrome here, just a nice original set of headlight bezels that came off of my 87 R20. asking $20 OBO
  24. G

    73-80 frame body mounts

    if you've been around these trucks long enough, youll know how much of a pain these things can be to find, and the center of the hole generally rusts out. asking $25 for the pair of front mounts, and $15 for the drivers side core support/spring mount.
  25. G

    73 cluster with gauges

    1973 gauge cluster, 100mph speedo, oil press, coolant temp, and amp gauge. very nice condition considering its age, will clean up nice. oil pressure gauge is mechanical. $50 OBO

Latest posts

Forum statistics

Threads
42,107
Posts
909,225
Members
33,593
Latest member
shake1969
Top