Search results

  1. t44e6

    Do intermittent wipers use a different wiper motor?

    I have an 82 K10 Custom Deluxe with 2 speed wipers, and would like the intermittent feature. I have replaced the wiper motor with a rebuilt unit that was identical to the original. Is the intermittent function in the switch, and is the motor the same? I currently have my dash pad and instrument...
  2. t44e6

    Location of cowl drains?

    Assuming on the outer region of the undercowl area, where are they accessed? From underneath? Is there a rubber drain or just a channel between panels? Thanks!
  3. t44e6

    Either this part is unavailable, or I don’t know where to search.

    I can't find this wheelwell brace / bracket for my 82 K10 listed by any vendor I've looked at. I could fabricate it but would rather spend the time on other issues. What's it called? Where can I buy one? I
  4. t44e6

    Looking for wiper arm options for 1982 K10

    The stock wiper arms have the straight end with a little nub to lock the blade in place. I have had some plastic replacement blades fail, and there is a limited selection of this type. Is there a wiper arm with a hook style blade attachment that is a direct replacement? Later square bodies have...
  5. t44e6

    God willing and the creek don't rise, my tractor will be here by 4 May!

    Bought a 85 Yanmar YM336D 4wd tractor with 137hrs. Yanmar loader and a MacKissick PTO chipper. I really wanted a little bigger but Yanmars are stout.
  6. t44e6

    Small block to straight 6 swap?

    I like 6 cylinders in pickups. I'm not hauling much weight and will probably never tow anything heavier than a 17' canoe. Building a 292 to replace the wimpy 82 350 might be fun. I assume it would bolt up to the NP435 trans/bell housing. What would need to be done to mount it? Is the crossmember...
  7. t44e6

    Leak under dash?

    I haven't dug into it yet, but after hours of heavy rain I had a trickle of water from under the dash, drivers side left of steering column. I have the dash pad pulled out, not coming from the windshield seal...is it coming from where the firewall meets the cab under the cowl? The only reason it...
  8. t44e6

    LockNLube Pneumatic Grease Gun New In Box

    LockNLube pneumatic grease gun, new in box. The locking tip clamps onto the zerk fitting for a positive seal eliminating waste and mess that happens with normal grease gun tips when they are not fully seated. Comes with male QD hose fitting, swivel adapter and a rebuild kit for the locking tip...
  9. t44e6

    What if any current truck caps will fit squarebodies?

    Nobody makes new truck caps for them. Does anyone know if a cap for a different model will fit my 82 longbed without too much trouble? I would be willing to fabricate mounts for it.
  10. t44e6

    Wanted: Cap Or Shell for 82 Long Bed

    What I really want is a simple old school aluminum cap, but nobody makes one for squares anymore. Will consider fiberglass cap. Willing to drive a ways from Western new Hampshire. HELP!!! I really don't want to make one.
  11. t44e6

    81-82 Chevrolet Grill Emblem and 81-87 Custom Deluxe Dash Emblem

    For Sale: One new GM licensed 81-87 Custom Deluxe dash emblem with mounting nuts, PN 05-185. I bought it because mine was broken, then after the return window was open I found the other piece of the original under the floor mat. $25 shipped to US addresses, insurance optional at buyer's...
  12. t44e6

    My first new car...

    My first truck was a 2WD 1976 Jimmy, 350 with auto. My first 4WD truck and first new vehicle was this 1987 "Power Ram" 150. 1987 was the last year of the Slant 6, and to meet emissions it had a 1 barrel and an anemic 90hp. The only options on it were a sliding rear window and a limited slip rear...
  13. t44e6

    What are some options for mud flaps?

    I would really like to install mud flaps on my K10, front and rear. What would offer the best protection for the body? Cost or ease of installation less concern than effectiveness.
  14. t44e6

    Should I yank my engine to do oil pan gasket?

    1982 K10, 350, 4 speed, stock exhaust. I have a leak at the front of the pan, and probably one on the front crank seal as well. I'd like to correct it before it gets bad. I haven't spent a lot of time looking at it, but it looks like it might be possible to do it without taking the engine out...
  15. t44e6

    I don't know where else to post this so...

    I understand that the creators and admins of this site probably don't want an open discussion forum, because they require a lot of moderation. If you want to argue about politics or vent about your in-laws there are plenty of places to do that. But it would be nice to have a forum where people...
  16. t44e6

    Some cool cars I worked on in my old life.

    I have worked on old Porsches for about 30 years, professionally for about 15 until I threw in the towel. Mostly 356 and older 911 and 912 models. Here are some pictures of some of my favorites.
  17. t44e6

    Headers for economy on 82 K10?

    My K10 runs great but was thinking of maybe putting headers on it and a lower restriction muffler if economy might be boosted a bit. It has a rebuilt smog era 350 in it with I believe the much reviled lightweight "624" heads and a QJet on a stock intake. Is it reasonable to expect any boost in...
  18. t44e6

    Installed LMC Repro Tailgate Hinges/Trunnions On My '82 K10, Not Quite Bolt On

    Ordered a complete set of hinges and trunnions from LMC trucks, the originals on my 82 were worn and on the left side the weld between the cup and the base had broken loose. They seem to be well made. The bolt holes on the "hinge" portion that bolts to the taligate itself had undersized mounting...
  19. t44e6

    Anyone have Bilstein shocks on their stock 4x4? Shock brand questions.

    I have used Bilstein shocks on several different cars from a 59 Porsche to a 1986 Cutlass and they have always given a great ride and last forever. Currently they are $80 and change each. KYB which I have been satisfied with on other vehicles are half that, Monroe / Gabriel similar. The 82 K10...
  20. t44e6

    Troubleshooting OPS and gauge 82 K10

    Gauge moves very little and never goes to zero even when shut down. Gauge bad or sender? What is the operating range of voltage that the sender should be sending to the gauge?
  21. t44e6

    Anyone have a good experience with Brothers Trucks?

    I ordered a set of door rubber on Amazon. I wasn't expecting OE quality but at least functional. Unfortunately the rear portion of the window channel felts isn't made properly and didn't offer a weather tight seal to the door. I watched a YouTube video created by Brothers and their rubber seemed...
  22. t44e6

    1982 K-10 Exhaust Manifold Questions, And Looking To Identify Engine.

    I have a 82 K10 with a rebuilt 350 of unknown origin in it. Manual trans. Where should I look for casting numbers? It looks like the intake has some orange peeking out under the blue paint. I would like to eliminate the EGR manifold on the right hand side. Is there a part that will replace it...
  23. t44e6

    82 K10 Gauge Issues, Dual Tank Question

    I have a few gauge issues I would like to troubleshoot, 87 K10. Manual trans, original 305 replaced with a rebuilt 350. First, the voltmeter is inop. What circuit feeds it and where is the easiest place to check that it is getting power short of removing the cluster? Second, temp gauge has very...
  24. t44e6

    Does anyone sell a front to back dual exhaust system for a 82 K10?

    I would like to buy a complete exhaust system for my 82 K10 with a 350 / 4 speed to connect to the stock manifolds. Does anyone offer one? I know they are offered for many different kinds of cars.
  25. t44e6

    What color code is this? Best source for rubber?

    I am waiting for my truck to be delivered. I know it needs some surface rust treated and touched up on the door sills and new door rubber. Does anyone know what color this is? #59 Almond? Where is the best source for rubber and trim parts in general? So many sources.

Latest posts

Forum statistics

Threads
42,110
Posts
909,351
Members
33,601
Latest member
rumpity_z28
Top