Search results

  1. Randy and Easton

    Easton Is Graduating Thank You all for your help GMSB!!

    Easton is graduating in a few weeks and I had to reach out to y’all and say thank you for everything. We did not join the forum until we were into the truck for a year, and boy sure figured that was a mistake. You all have been so helpful to a father (shade tree mechanic) and his kid. Easton...
  2. Randy and Easton

    Loaner Bench Seat DFW Area

    Strange request for sure. Easton has found an upholstery shop to finally do his seat. Downside it’s going to take 2 weeks and he needs his truck obviously during the down time. Anyone in the DFW area know where we can buy/rent an old bench or solo seat so he can keep driving his truck during...
  3. Randy and Easton

    Vintage Air Heat Control Valve

    Has anyone had a failure of the vintage air heat control valve? System has been running great since installation. Heat quit working on Sunday after church Easton Said. Did some troubleshooting today and found the control module leaking. Can’t figure out where precisely it’s leaking. Contacted...
  4. Randy and Easton

    Ammeter Fuse size?

    Have ammeter in gauge cluster and does not work. Previous threads show 2 fuses, we can find only one and it’s blown and broken off in old holder. What size fuse does it need? Going to replace it with a new bladed fuse holder just need size. If there is another fuse any hide and seek information...
  5. Randy and Easton

    Custom Kick Panel Cover

    Easton put together a makeshift cover for passenger side kick panel vent that he wanted gone after Vintage Air installation. Now he has a continuous squeak from that side he feels is the metal shifting as he drives. I saw somewhere a company that makes custom kick panel vent covers but searching...
  6. Randy and Easton

    Anyone Use Classic Industries Dash Pad

    Trying to save Easton some money. Anyone use Classic Industries 14006171 dash pad for 76 c10? It’s a ton cheaper than LMC and free shipping. Not a show build just a 16 year olds daily driver. Thanks for any info.
  7. Randy and Easton

    Instrument Cluster Installation

    Easton’s cluster has been out for better than a year and a half. Have a donor cluster housing that I was using to check fit before trying his. Not getting anything to line up right I don’t think. Anyone have a few pictures how just the cluster fits back into the dash frame opening? I see the pin...
  8. Randy and Easton

    New TH350 pan recommendation

    Have had a constant leak (very small) from tranny pan since we got the truck. Previous owner used sealer around pan to slow it. Was planning on replacing gasket and filter but got to thinking, maybe it’s the pan. So I started looking at new pans on Summit Racing but lots of the reviews talk of...
  9. Randy and Easton

    Door Jamb switch housing

    Ok, we know this will be way easy for y’all but we are stumped between Lowes and Home Depot. Got Painless door switch kit. Switches have “nothing” to screw “into” on door frame. What can we use to put into hole with a ridge on back that will allow switch to screw into doorframe? I can see it...
  10. Randy and Easton

    Complete refurbished instrument cluster 1976 C 10. DELETE

    Have a complete rebuilt instrument cluster. New everything except speedo, had it reworked and reset. Easton has decided he wants Dakota digital after vintage air install. I don’t want to say what he has in it, but make an offer plus shipping from DFW and maybe he will part with it. Thanks...
  11. Randy and Easton

    Brothers Truck is now Holley.com

    I’m sure y’all have already seen but brothers truck was acquired by Holley. Website totally changed. Free shipping over $100 ( maybe LMC will take a hint?) talked to a few employees yesterday over a warranty on a vent window which they gladly made right! The employees think the acquisition is...
  12. Randy and Easton

    1976 Square drivers side A/C Duct

    Installing Vintage Air in sons 76 C10. The kit has you use part of the duct for the far left dash drivers a/c vent. Problem is we don’t have that ductwork. Truck had air when he got it but that duct was not part of the existing system (imagine that?) Found one at usa1 industries however you...
  13. Randy and Easton

    What is this wire for?

    Hello y’all, This picture is of inside the engine compartment looking at fuse box. We are just working on the electrical stuff and wonder what this was used for ? On the very bottom , left cluster. Anyone have a diagram of what wires are on engine compartment side? Most of the printing...
  14. Randy and Easton

    Horn relay Electrical connection

    Does anyone know where to get a new horn relay connector? Mine is fried and I would like to put on a new connector. Thanks Not my only trouble with the horn at this point but we are getting closer! Randy and E
  15. Randy and Easton

    Firewall Steering Column grommet

    Guys, been awhile but we finally got the new column in however need the rubber grommet that goes behind the lower firewall plate. Not having any luck on LMC and such… maybe we are using the wrong name for the part? Any help appreciated Randy and E
  16. Randy and Easton

    Where can I get this connector?

    Steering column being rebuilt with new parts but if we need this connector, where would I buy one? Lots of cut and sliced wires under here! Thanks Randy and E
  17. Randy and Easton

    Is this the electric window relay?

    Electric window regulators, locks and most of the wiring removed from doors. Trying to clean up the rest that ends under steering column. I am just not wanting to mess anything else up but is this the window relay? Did not want to pull something out that needs to stay. Thanks y’all Randy and E
  18. Randy and Easton

    Removing power window regulators glass down

    My son decided he wants crank windows as his 76, square had power when he bought it. Since sandblasting and paint the window is stuck in down position and he wants to put manual regulators is. Will we have to get the motor to move to get the glass out of the track to get everything out? Or if...
  19. Randy and Easton

    Cable Tie vendor?

    Can anyone provide a vendor for these style 3/8 cable ties to frame? Thanks! randy and Easton
  20. Randy and Easton

    No power to power windows

    Need help as usual. 15 year olds restoration project. Power windows worked prior to sandblasting. Now as we are putting truck back together no power windows. It is a ‘76 we bought with the PW already installed. I checked, all fuses are go, switched power to other ignition related items is good...
  21. Randy and Easton

    1976 Bench Seat Release Cable

    Have a great condition bench seat for son’s 76 C10. Need the bench seat release cable. Release locks work fine, just cant find a vendor for the cable. Thanks y’all Randy and Easton
  22. Randy and Easton

    Are shims still needed after cab mount replacement?

    Did we create more problems? While truck was apart my son replaced all the the body mount hardware with polyurethane mounts from Brothers. The old bushings had numerous shims on both sides so he put it back together in reverse order WITH the shims. Post paint, we are starting to put hood and...
  23. Randy and Easton

    3 Point Seat Belts ‘76 C10

    Looking to buy new 3 point seat belts for son’s 76 C10. It only had lap belts when we got it. Who has the best aftermarket set out there? LMC, Brothers,Classic? I am so worn (shipping) out from all the returns to these suppliers when parts are inferior or just plain don’t work. Like to save...
  24. Randy and Easton

    Rear window seal 76 C10

    Back window went in after a few tries. Changed rope size to 3/16 and had to use hook and ball tool but we finally got it. Thanks to Jeff and Greg at Precision and the video support!
  25. Randy and Easton

    DIY Raptor Bed-liner

    Have to say the Raptor spray in liner is lots of bang for the $$. My 15 year old truck is a budget build on his dime. With the color and the kit we had about $200 in it. Easy to apply and came out fantastic. We highly recommend this. He did the entire thing himself!

Latest posts

Forum statistics

Threads
42,120
Posts
909,555
Members
33,614
Latest member
BryantRiverRat
Top