Search results

  1. Driver4r

    Driveshaft length differences.

    What is the length of a sm465/205 with a 12 bolt, And what's the length of a 465/205 with a 14 bolt? If someone could measure them if they are handy that could be very helpfull. That's one of the hold ups with my swap. Sent from my SM-G930V using Tapatalk
  2. Driver4r

    Driveshaft lengths

    We need to create a sticky with all the driveshaft lengths. So it's a one stop answer. My question. Is a driveshaft in a th350/205 the same as a sm465/205? Sent from my SM-G930V using Tapatalk
  3. Driver4r

    16x10 steelies

    Has anyone ever seen or ran 16x10 Steel repops with a dogdish and a beauty ring? I would go just dogdish, but as wide as the lip is, I was thinking a ring would make it look a lot better. And given the color scheme of my truck, instead of white, I'm probably going to go with a silver.
  4. Driver4r

    Making Van Buckets Fold?

    I love having the option to lean my bench forward, but I also have a pair of buckets out of an 87 g25. Other than a piano hinge at the front. Has anyone ever taken them apart and made them hinge?
  5. Driver4r

    Fuel Tank Idea

    What are some other tank ideas for a rear mount tank? I'm looking at running 2 87 tanks*20 gal* with 300lph pumps, but I'm also building it with the plan of a slick looking Trailer puller *drag car/jet boat, occasional gooseneck* so I'm going for the simplicity look also. Its going to be...
  6. Driver4r

    Nv3500

    Has anyone ever played around with one and saw its limits? Ive read from both sides of the fence, so im looking for real world experience here. not Heresay. Looking at a nv3500 in my truck so i have something thats 3 pedals :):):) Setup is going as follows: LM7-5.3 ls nv3500?? tcase-TBD...
  7. Driver4r

    Show of hands

    Show of hands. How many of you know how to do this?
  8. Driver4r

    Quench

    Ive been planning out a 331 build in my head(.030 over 327). This is going to be an RPM engine, its going to hit at least 10k(8k avg.) My question is, is my quench to tight to the point where bad things will happen. The plans: Zero Deck the block even with the pistons(2 relief flat tops)...
  9. Driver4r

    2000 cavalier engine interchange

    There's a nice 2000 cavalier z 24 at the local scrap yard that my dad and I are looking at for me to drive back and forth to school in. It has a 2.4l in it with suposedly a bad rattle. (We havnt heard it yet. Just.going off of others). So I looked for a 2.4l and found one out of a 08 hhr with...
  10. Driver4r

    "Decade of Glory" (Car pics)

    I figured this would be a cool topic to have on here. Im sure im not the only one here that enjoys the "street freaks" and gassers of the past. I like that style so much I even putting air shocks on my monte to jack up the back lol. (said car is attached) So feel free to post pictures of...
  11. Driver4r

    DriveShaft U-bolt Straps.

    Well guys, im in the process of putting a corp 10 in the front of my 76. And my Dana held the D-shaft on by 2 ubolts going thrue the yolk. The new Corp-10 uses retainer straps and bolts, i have to track down 2 straps and 4 bolts. What axles will have the same straps/bolts? 10bolt rear by...
  12. Driver4r

    Driver4rs trips to the junkyard

    Figured this would be a good place to post pics of my junkyard trips. TBI 454: I didnt realize they ran a carb plate untill IMAN told me. Bumper Tusks: Anyone need some? I found a couple of sets. Nice 4L60: Ls 4.8/5.3: This ones for retro, what the hell is it????? Solid aluminum front...
  13. Driver4r

    Wiring a Speedometer(T-56)

    A buddy of mine has a cutlass with a t-56 out of a viper in it. I got the lovely task of making the speedometer work. Viper was the only VSS for a t-56 with 3 wires(5v,Ground,Signal) And the Guage is a Autometer Sport-Comp. I found the wiring diagram from the sensor to the guage, but what I...
  14. Driver4r

    Sub "Thumping"

    Even when my HU is turned all the way down, my sub thumps really small(you can still hear it in the car, BTW-this is my car, not the truck) And even with my music all the way up, my sub doesnt respond but yet it just thumps. That was with the 2 channels bridged. Well i unhooked 1 lead and ran it...
  15. Driver4r

    Driver4r's Monte

    Ok, i figured ide start a thread for my monte progress. As of now it is: 305(rod knock) th350 w/ lockup 10 bolt originally 2.29:1's Plans: 350 w/ vortecs and L79 cam th350 with shift kit Headers hooked to glasspacks that dump Gear swap to 3.42's
  16. Driver4r

    71 Cutlass S

    Hey guys, been away for a couple of days. But in the Meantime, i got asked if i wanted to buy a 71 Cutlass S. It has a HEALTHY 455 in it with a pretty nice cam :D . The 455 is backed by a T-56 suposedly out of a viper. The car is Goldish yelllow with a White top, It has a W-29 Hood on it(the...
  17. Driver4r

    Parting out van

    Anyone need any parts off an 87 Van? No Engine/Trans. Ask about any part and if its good, we can negotiate a price. Forgot to mention is a 3/4ton.
  18. Driver4r

    New toy.

    I gots a new toy :D . LQ9 6.0L Looking to convert it to carb and run the ignition and everything standalone. Have to pull the bottom end apart and check it all out. Unsure of If theres anything wrong with it. [/URL][/IMG]
  19. Driver4r

    Guage Plug

    Dumb question, but i picked up a tack cluster out of a 74 k20 with a amp guage. And im wanting to put it in my non tach 76k10 with a volt guage. I have 2 Questions. 1. Is the pinout of my 76 cluster the same as this 74 cluster?(BTW, i got the 74 plug with about 6" of wire) 2. Can i replace the...
  20. Driver4r

    Tank valve cover.

    Since alot of you didnt know that factory there was a cover over the tank selector valve, and alot of you claim to not have them on your valves. I picked up one today and was wundering if anyone on here wants one? Make me an offer.
  21. Driver4r

    Tires

    Anyone here run a set of 35x14.5-15's? Looking ahead at tires im debatting between 35-14.5-15 Nitto Mud Grapplers http://www.ebay.com/itm/35X14-50X15-NITTO-MUDGRAPPLER-MUD-GRAPPLER-TIRES-NEW-/121125967461 OR 35-12.5-15 BFG AT KO's...
  22. Driver4r

    70's, 80's, and 90's Show Trucks.

    For not even being born till mid 90's, i consider myself to me more of a nostagic person as far as vehicles go. And I thought that it would be a cool thread to post pictures of Show trucks from the Golden years. I'll start: I especially wanna see the rainbow painted trucks :D :drool:
  23. Driver4r

    Help with lift.

    Assuming the front springs i got are 4". To avoid using blocks in the back, how much height would a shackle flip give me? Also ill get a picture of the spring packs, and mabey someone on here can chime in. The stickers on them are to worn to see a #.
  24. Driver4r

    Weird audio sound.

    I dont know why, but every once in awile i hear a chirp/click sound come from my speakers. Doesnt matter what the input is(aux,cd,tuner,usb). Atm, im not sure if its in my main 4 channels, or if its thrue my rca's( i have 2 boxes behind my seat with 8" woofers and tweeters in the top).
  25. Driver4r

    Yo hotrod.

    Hotrod, you really should put up a 700r4 rebuild on here, im debating either me doing it, or taking to the local college and letting them.

Latest posts

Forum statistics

Threads
42,102
Posts
909,081
Members
33,585
Latest member
sriddle36
Top