Search results

  1. MacAgent

    1980 C10 Custom Deluxe sputters at 35 mph

    Yes, all is good and on my 3rd fuel pump in the last 60 days. Could be timing?
  2. MacAgent

    1980 C10 Custom Deluxe sputters at 35 mph

    Help needed! My C10 is bogging/sputtering at 35 mph and when I let off the throttle, the pickup seems fine and will advance and do repeat at 45 mph. I’ve changed out the plugs, wires, distributor, new fuel pump, blew the fuels lines out, and replaced all vacuum lines and fuel filter going to...
  3. MacAgent

    No Start and have adjusted switches

    Forgive my ignorance, which red wire are you talking about?
  4. MacAgent

    No Start and have adjusted switches

    Good info, I’ll work it tonight.
  5. MacAgent

    No Start and have adjusted switches

    Ok, I’ll check that out.
  6. MacAgent

    No Start and have adjusted switches

    Battery posts are secured as can be. That’s how it’s always ran since the original owner. I’m going to try your recommendations. They’ve been helpful so far.
  7. MacAgent

    No Start and have adjusted switches

    In the pictures, I have power from everything but the yellow. On the neutral safety switch, only the yellow and purple have been connected. The blue and green have been hanging. When the green touched the blue before taking the picture the truck tried to kick over. I do know for a fact the...
  8. MacAgent

    No Start and have adjusted switches

    All I get is the buzz from the dash and the air circulating.
  9. MacAgent

    No Start and have adjusted switches

    I haven’t, would a bad starter not give me anything when I turn over? It’s dead silence.
  10. MacAgent

    No Start and have adjusted switches

    I’m at the end of the road with this issue. I recently replaced the neutral safety switch due to my 1980 C10 not starting 100% of the time. Well that wasn’t it, as I discovered it was the ignition switch. Replaced it and it started once and the lock cylinder wouldn’t go back to the lock position...
  11. MacAgent

    Ignition Cylinder / Ignition Switch

    Thank you, yes the old track and sector match the new. There isn’t any cracks with the old. This is my first go at it, so to know if the rod is bent is beyond me. Same goes for the adjustment of the switch. I will move the switch to the lower position and see if that works.
  12. MacAgent

    Ignition cylinder replacement

    Curious to know how you fixed this? I watched the YouTube videos and am not having any success. I’ve replaced the rack and sector too.
  13. MacAgent

    Ignition Cylinder / Ignition Switch

    Hello - question for anyone as I’m in need of help. I replaced my ignition switch and when I started the truck it started but the ignition cylinder would not line back up in the lock position. I’ve town it down and the Rack and Sector are in good shape. I replaced them anyway since I was there...

Forum statistics

Threads
42,976
Posts
925,842
Members
34,539
Latest member
litchfr
Top