That's cool. Wish I could of got better pic. Seen a lot of square on vaca. Hard to get pics on road!
Saw this one in Mansfield pa. [ATTACH]
Yes. It's the non desirable 6.2. Got 1 in my TK and Suburban. They r slow but you can't beat fuel mileage.
I got another engine for my Burb over the weekend. Long hot drive to middle of nowhere Virginia. [ATTACH]
Yes the carrier from an 84 g van would work for you.
1 in back is usually going to brake booster.
I use a sharpie mean streak marker. U can get them at lowes. They r in the tool section
Last load for this year.[ATTACH] [ATTACH]
Unfortunately I get wood whenever I can find a couple free hours to cut. Don't enjoy cutting wood in a tee shirt! Still have 1 or 2 more loads to go.
Your welcome. Just make sure to get a new one. Reman pumps are junk. Mine was from BBB Industries.
Sometimes the metal cups can stick. Maybe part of an mount is stuck on bottom of rad support
1st one is for trucks without any emissions components. Second 2 are for trucks with emissions (cats and/or air pump)
I didn't have any pedal problem with my hydroboost, but I did have a moan/groan noise intermittently in my Burb. I had just replaced a leaking...
I pull filler necks off all the trucks I strip. They are a good selling part around here in PA.
Getting ready for winter.[ATTACH]
Did anyone else notice the compression fittings on the brake lines at the master cylinder?
They should never be used on brake systems.
I keep all my tires at 45psi for daily driving. I add 10-15 psi in rear tires when loaded. I don't tow anything heavy with it, so i never air them...
I am running a LT265/75R16 on my 2wd Suburban. They work great and look nice on a 2 wheeler.[ATTACH]
Just remember you are going to lose some hauling capacity. Your going from a tire with a 3042lb max load to a tire with 2680lb if you drop to the 225.
I've removed lots of glass over the years stripping trucks for parts. I've never successfully installed a windshield or backglass myself. I just...
According to the GM catalog they should be the same from 74-88. There is something diff about a 73 glass. I think it's the molding.
There is 2...
Welcome from central PA.
Check with "lines to go". We use them for stuff that's discontinued at my shop
I agree on the heads. big square ports are best for race cars and smaller oval ports are for making torque in a street engine.
my engine in my...
Yes it was a part time NP203. Worked great with slip posi's in both axles.
Separate names with a comma.