Nice repair on the firewall, the windshield should be a walk in the park for ya!
Something like this:
Yes that will work perfectly. let me verify the area I need and I'll PM ya. Thanks
cancel that request, I got it, and only a minimum amount of colaterial damage. :favorites13:
How did ya do it? It looks like major surgery to get the old one out. I've got some rust issues in the lower section around the talgate trunnion...
Is this a show truck? Butt weld would be best but I think most people lap weld. Flanging the patch would look better then a lap welded patch. I'm...
Interesting, thanks for the review
Thanks againn Jerry, I did see Raybuck has the complete rear bed corner. It's alot more then I need but if no one here has a scrapped bed side...
Thanks for the link but it doesn't work. I'll look around ebay and see what I find
I'm looking for the top rear section of the left side box, Like this,
So basically from the taillight up 2 or 3 inches anyway.
FWIW, If the rust is not in the corners I'm thinking a straight section out of any place on the frame will work, you don't need to have the exact...
Well it's not a vacuum issue, so chances are it's electrical, but I'll be damned if I got a clue.
It sounds like there could be a wire that gets...
The pierce nuts are out there but you'll probably need to buy a pack of a dozen or more just so you can get the one you need. I'd hit a bone yard...
So I guess you're not interested in the one I posted. your welcome.
Not sure if this choke will convert to electric or not, it's a hot air choke now. 17057256 and was used on 77-79 OBP's.
There is some play in the...
I think I might have one Taylor. I'll get back to ya.
Count the wires on your switch, I think a standard hi lo has 5 wires and the intermittent one has seven.
@79K15 HIghSierra , are those the Rock Auto springs you originally posted about? Let us know how the ride is, I'd like to replace my 78's when...
Good question, I thought they were just metal to metal. I'll have to look at my 78 but I don't know if they are original fenders.
Everything is bolted except for a couple welds at the tailgate post like Termite-Delight mentioned.
Here are the welds on mine.
Are you sure it T4U? I don't come up with anything either. Maybe you could share a pic of the numbers?
Bedsides (inner and outer panel) are easy as mentioned, but if you're talking just the skins, it's like 44tt said, it's major surgery.
Did I miss the finished pic?
The vin is telling you what the cab use to be on, to figure out what the rest of it is you'll have to find the partial vin on the frame rail, the...
Around here it would fetch 50-150 with or without the scratch.
Separate names with a comma.