One quirk I noted on this 13 burb is that the buttons on the rear climate control stay illuminated all the time. That shouldn’t be. Bad control...
Could have been but not my problem anymore. I am glad to be rid of that truck!
Nope, shes gone. I had replaces the cats on 45,0000 ago.
That is correct.
Solved! 2013 with 64,000 mi on it. [ATTACH]
Thanks but man I have checked that thing so many times! I even unplugged the line when I shut it down just to be sure. No luck there.
So, with the slightly warmer weather it’s worse and smells rich when it does start. I wish it would give me a code or something.
Yes to both. scrubbed the crap out of that throttle body with SeaFoam deep-creep and an old tooth brush. then rinsed it with carb clean and wiped...
My buddies at the auto parts store let me borrow a new MAF..... No change..... I don’t know...
Still Struggling Typically acts up when luke warm ~120F No start for 3-5 attempts. It actually starts and immediately dies. Here is the sequence...
Not sure what you mean...
Thanks! holding the pedal at full throttle tonight had no positive effect. Partial throttle seemed better but when it geeks out it takes a few...
I don’t really suspect the EVAP either. And I agree about the injector leak. Seems it would only affect the cylinder it was related to and trow a...
I understand what your saying. My understanding of the fuel system is the pump sends fuel to the rail with is regulated and excess returned by...
It does and it usually starts right up. In the morning there is zero pressure and she fires up without even priming first. just turn the key.....
Yes it does. I will have to check if it does. What are you thinking the relationship to the EVAP system is?
I had that coming! Well, at least my fuel gauge reads correctly now too. I have verified that it loses pressure but I don't know where. When I...
Yes, replaced the regulator on the rail. I have tried applying throttle but can’t say if it helps or not. It usually starts on the second or third...
Hey guys, Long time no see! I have been busy with life and not much fun. Wife and kids are good and growing. Looking for some help with my 03...
Welcome from Oconomowoc Wi.
First snow of the season. [ATTACH]
The only outlying issue may be how tight the nut is on the pinion. It was pretty loose when I went to take it off. I would say it was maybe around...
Well, I don’t know.... I pulled the drive flange off again, knocked the seal off and cought all the fluid that came out in a clean pan. The front...
I guess I am going to go back under this thing and inspect that front bearing. I am also going to catch he drained lube in a glass container so I...
Am I correct in my understanding that regardless of manufacture the bearings should be within a couple thousandths of each other size wise? So the...
Separate names with a comma.
