Hey, Hey, Hey! This rig is a Silverado!!
A little update, I am slow, but at least it is going the correct direction. A little before and after, along with a what will be replaced and...
This is the thread on redoing your old dash And a before and after photo of the first one that I did. No speaker holes in this one... [ATTACH]...
You can redo your stock dash to come out looking very nice with a little effort. There is a thread in the interior section on how to do it. I...
Three door handle pads from the donor Burb and one from the brown C30, a little epoxy primer, a little red paint... [ATTACH] [ATTACH]
Quick test fit/mock up [ATTACH] [ATTACH]
Prepped, epoxied, base coated and cleared them. I was going to give them a matte finish, but I like the gloss finish. [ATTACH] [ATTACH]...
Never liked GM's crappy pull strap design. Like they couldn't have designed those NOT to break!!!! So I made my own filler pieces [ATTACH]...
Stole the interior trim pieces that I could from the donor Suburban and purchased a couple of aftermarket parts online. But they were all the...
The truck didn't have a headliner and was missing a bunch of interior trim. After screwing around trying to make a donor Suburban headliner...
...then coated and textured the panels. I will wait about a week and hit them with some Dark Carmine that I got from USA1 - turns out it is a...
Shot some black epoxy primer...(don't forget the adhesion promoter!) [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Stripped the panels bare and gave them a good cleaning with paint prep scuffing paste which has both a soap and a scuffing agent in it. Filled...
I started by pulling the interior door panels out of a 91 parts Suburban that I have. Since Suburbans have a better chance of being in good shape,...
I am in the middle of redoing the interior of my 89 Crew Cab, adding the missing headliner and doing a stereo install. This is what I started...
...then coated and textured the panels. These aren’t the final color, but are close. I will wait about a week and hit them with some Dark Carmine...
Used epoxy primer... [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Use the foam and total boat epoxy. Just like bodywork it is all in the prep. Use a spray on Guide Coat (SEM) and sanding blocks. If I can do...
Quick update on the dash, painted the insert then gave it a matte clear. Hopefully it will go in this weekend. [ATTACH] [ATTACH]
Found them, I don't know how to delete a thread!!
Ok, I quit! How do I get this seat belt cover off without breaking it? [ATTACH]
They look like this: [ATTACH]
Separate names with a comma.
