You’ll need a good test light and a helper
If the hazards work
It’s not the wiring back to the light
Probabaly in the switch
A lot of times...
If it’s just one ear it will Probabaly be fine to run it
Also, if the top pivot on your clutch pedal is worn out bad enough that new bushings...
That’s nice !
Usually All the vendors don’t actually have any products in stock, they just drop ship them from the manufacturer.
They have a...
cause having a different brand for selling overseas is too difficult ?
They have opal Holden etc
It is GM though , so why have one 350 engine...
GMC is an upgrade Chevy , they just up the price tag and people pay it for no reason.
That’s why GM kept GMC and killed Pontiac, even though...
Redhead makes the best steering boxes for square bodies
And they have a seal on the adjustment bolt. And the warranty is void if you turn the...
We bent up a coat hanger for a pattern and spent about two hours at an auto parts store looking at all the radiator hoses and taking them out and...
If the seller doesn’t have a receipt , the engine didn’t get rebuilt .
As y’all know an engine or trans rebuild is big money, and comes with a...
Makes it a lot easer to cut.
You can run 33s without a lift
At least I did
What axle ratio does it have ?
If you do replace the springs I used Alcan and love...
You can run 33s with no lift
At least I did before we did a 4” lift and 35s
We used Alcan springs
Very quality product and a nice ride. Firm...
Not that hard to swap on 8 lug spindles on the front and an 8 Lug axle in the back of thats he look you really want
Perhaps potential buyers are like you and don’t want the flipper to be making a fat profit out of their pocket ?
Bring a Trailer might be a good...
When you find an axle , pull the cover and inspect the gears for wear, and verify the ratio.
Ask the seller if they have already removed the...
We used vintage air In the 76 K10 and in the 65 Falcon wagon.
It’s a good kit , not too hard to install
We have a LS engine so was a little more...
You could use some short tube headers
Make sure to install plenty of heat shielding
The 6.2 diesel squares had a hydro boost from the factory
Should be a bolt in deal
Everything is made in communist China
Don’t worry, the carona won’t be on it
Really funny watching everyone in the airport wearing masks while...
I had a lot of problems with the connector not making contact internally
I just cut the wires and used high quality connectors thru a grommet...
If you can get to the trans linkage
You could disconnect it from the shifter and move the lever on the trans to something other than park
There’s a slot on the back of the hanger to get a wrench down in it
It’s full of mud and dirt
Nice looking ride
I’m the kind of resident that HOAs keep from moving in.
We got our VA kit from Rutters Rod Shop in NC
Also the instructions for installing the evaporator are total garbage
We did not use the spacers...
I do a lot of towing , bobcats and mini excavators with a 2017 2500 4x4 chevy crew cab and I always use the manual shift buttons to keep it in 4th...
Separate names with a comma.