I think this is an ok article on it-
it seems like it might make sense to change out my rear end.
How much different is a 14 bolt full floating axle with 3.73 gears and posi...
Alright, I did the math. I've got 2.685 gears. That kinda blows.
This is in my ‘77 C10. It is a 12 bolt.
I’m trying to figure out my gears. I can’t figure out these casting digits.
Do any of you know these?...
I’m about to the point where I need to look at wheels.
I think I like the gun metal torque thrust style.
I’d really like to go 11” wide in the...
I’m installing new leaf springs. The bolt that holds the leaf springs together sticks out of the nut pretty far. Because of this, the ubolt...
Which truck do you have?
I’ve seen the shackles that are made for 1” or 2” drop. I just don’t know if you can also use them as stock height...
I’ve got a ‘77 C10. I have the bed off and I’m rebuilding everything from the cab back right now. I have new standard leaf springs and shocks....
is that about 9.5” between the 2x8s?
could you take some measurements when you get time?
Sorry, guys. I guess I meant more of a cradle.
Have any of you guys built a wood engine stand?
Does anybody have engine dimensions?
I think I just need the width of the oil pan and the...
It should have some pep... we'll see.
IIRC, my pistons are L2467 flat top with valve reliefs.
Comp 12-423-8 Roller Cam
Weiand 8004 Intake
So, I've got a '77 C10 Scottsdale. I have a SBC 400 (406) engine. It has aftermarket aluminum heads with square port exhaust.
I haven't lowered...
This is the cam I have-
My heads are threaded for 7/16 studs.
I thought I’d go with...
So if I use self-aligning I don't need to worry about guide plates?
I do have a cam.
What accessory brackets would cause me to not be able to...
I've got a sbc400, punched out to 406.
I have some aluminum heads. The heads are 200/64.
How do I choose rockers? Do I need guide...
Hmm, that’s possible. I will look into it.
No, the truck wasn’t running when we pushed it.
I suppose it could be the cap.
But how much pressure could there really be?
Alright, I might be a little crazy, but...
I pushed my 77 c10 out of my pole barn, turned it around, and pushed it in reverse back into the pole...
Separate names with a comma.