Search results

  1. T

    Mirror and Vent Windows

    I hope everyone is having a great holiday month, I am looking to purchase good fitment/quality vent windows for my truck. Id like a "complete" bolt in style that already has the gasket and handle ready to go and does not need assembly. I also need a good quality set of mirrors. With so much on...
  2. T

    Anyone know what lead this is?

    Hey all, I have this weird lead coming out of my fuel pump relay. Not sure if this is for a gauge or not? Does anyone know?
  3. T

    Tank Selector switch Installation

    Thanks for the reply! Yes i heard rumor of the 87’s having a special switch so i ordered it through AC delco direct vin. Ill grab a photo later. Its a standard switch either RH or LH its not a press and hold. The back is 4 prongs all even in a square patter on the top portion of the back of the...
  4. T

    Tank Selector switch Installation

    Good morning, I removed my old switch and the ac duct to replace my tank selector switch. When reinstalling i am having a hard time with this. Do you assemble the switch and harness then shove it from the front of the dash into the mounting hole as one piece? Or do you try to put the face of...
  5. T

    Dual Tank Switch Causing HP Fuel Pump to Shutoff?

    For some reason I don't believe my switch is working. Yesterday when swapping over to the DS tank, my truck immediately died, no sputtering, no delay, it just instantly died. Cranked and cranked and nothing happened. When I switched to the PS with the key on, the fuel gauge pegged to 3 O'clock ...
  6. T

    Dual Tank Issues

    Good afternoon, Before I get spammed saying "you coulda searched this thread" and vice versa, I have looked into the forum but have a strange problem unlike others are having. I have a 1987 fuel injected c10 with a 350 and dual tanks. Truck has been running great. Both tanks have been working...
  7. T

    87 Mechanical Issues Need Help!

    Hey guys, I got a few things going on am and looking for input from the pros in this forum. Finally got my truck back from the body shop and took it to a local car show. My truck is an 87 350 with an earlier Pro Flo EFI kit on it. Truck drove absolutely flawless to the show. When I left, I...
  8. T

    180* Upside down Steering Wheel

    Tried that. Can only go one way.
  9. T

    180* Upside down Steering Wheel

    Ok so theres no adjustment that could have gotten messed up in the column. So ill have to look at the tie rods.?
  10. T

    180* Upside down Steering Wheel

    thank you how would I know the tie rods were moved around if there is a way to visually see that? My friend said the column could have been 180ed by a few U Joints Deep in the column as well?
  11. T

    180* Upside down Steering Wheel

    Is it possible that the steering box is centered correctly and something in the column is off? I took it for a drive and other than the wheel upside down it seemed to turn fine. I wonder if something got messed up in the aftermarket wheel install. Also am i correct in saying that from the...
  12. T

    180* Upside down Steering Wheel

    Its a C. I feel like it may be something inside the actual collum.
  13. T

    180* Upside down Steering Wheel

    Good evening. I have an 87 that had an aftermarket steering wheel on it. When i took the old wheel off, the horn spring was not in its expected location. It was at about the 4oclock position instead of the 10-12. I was wondering why this was so out of allignment. I put the new oem style wheel on...
  14. T

    87 Grille Trim

    Hey all, hope everyone had a great weekend. I am doing a suburban back to “OE” grille. Im at the stage of finalizing the project, i am installing the 4 pieces of grille trim. Im wondering if the top and bottom go on first and then the side pieces or is it the other way around. Thank you.
  15. T

    Need help with paint code

    Thank you guys!!!!
  16. T

    Need help with paint code

    Hey alll. Truck is red. Wondering which number is the paint code. Thanks!
  17. T

    Suburban Back to OE Grille

    Thank you thor. So obviously I willhave to remove the radiator and everything on the support. Is it other than the radiator support just the grille parts? So the radiator in truck now will work? And i assume its the “original” PN radiator in there now.
  18. T

    Suburban Back to OE Grille

    Hey all. Got a 87 R10 im looking to make the front clip back to stock. I tried researching this and found no luck. Im wondering how extensive of a project this is. Does anyone have a parts list and a step by step? I have an 89 Burb Grille front end. I think those LMC dress up kits for the OE...
  19. T

    1987 C10 Spark Plug Gap?

    Used the search bar but trying to figure out what spark plug gap is right for my 1987 R10, 350, with edelbrock fuel injection?
  20. T

    87 Smog Delete

    Thank you!!! I cut the line to the smog and capped.
  21. T

    87 Smog Delete

    Marine thank you for the reply. Im a little confused. On the first photo where there are two lines into one, one of them goes to the smog, and the other one goes to that valve cover connector shown in the second. The first photo the hose on the right goes to the valve cover directly. Im worrying...
  22. T

    87 Smog Delete

    Just unhook those vac lines and cap the intake and cap the valve cover harness one?
  23. T

    87 Smog Delete

    Hey guys. I did a search on smog pump removal. My pulley is damaged and theres no belt going to it so I figured id remove it and save it. I heard that the two wire harness can be disconnected and tucked back into the main loom and wont cause running issues. My question is how do i cap off the...
  24. T

    TV Adjustment

    I noticed while driving the heat was very minimal so its probably an engine issue and not a gauge problem. The engine runs “fine” so I dont think its the efi sensor. If i can see the engine gets up to temp then ill chase the driver side gauge sensor and or gauge / wire. What should the temps be...
  25. T

    TV Adjustment

    Yah seems to run fine. Doesnt smoke or smell excessive fuel. I think testing the temps of hoses will point me in the right direction. Can rule out thermostat, if i know its not the thermostat and it is up to temp, ill look for something with the gauge sensor.

Latest posts

Forum statistics

Threads
48,419
Posts
1,067,058
Members
42,808
Latest member
Scrambler-Cafe
Top