Search results

  1. T

    Does this head/rocker setup need guide plates?

    Yeah I did screw is studs because I have some tighter springs so I can run a bigger cam in the future. I’d be interested in that info if it’s not a problem for you, thanks I appreciate it
  2. T

    Does this head/rocker setup need guide plates?

    I should be good without drilling those holes out? My cams just under .450 and my rockers are 1.52
  3. T

    Does this head/rocker setup need guide plates?

    Flat tappet
  4. T

    Does this head/rocker setup need guide plates?

    Do the stud bosses have to be machined down for guide plates? I’ve heard some people say yes, others no…
  5. T

    Does this head/rocker setup need guide plates?

    So if I get some self aligning rockers will I still need the holes hogged out? Just don’t want to pull the heads back off if I don’t have too. The cam lift is around .450, nothing crazy
  6. T

    Does this head/rocker setup need guide plates?

    I haven’t checked rocker geometry yet. I’ve never done it before so I’ll have to do some learning. What’s the difference between self aligning rockers and not self aligning ones? Theres no difference between these and factory ones besides the roller tip, does that change the self alignment part?
  7. T

    Does this head/rocker setup need guide plates?

    Comp Cams says these rocker arms are supposed to be used with guide plates… no big deal, I’ve already drilled and tapped for screw in studs I would just need the guide plates and correct studs. But I’ve read you don’t need them if the hole in the head (where the pushrod goes through) is the...
  8. T

    Need heater/AC box wiring help

    Yes, very helpful! Thank you
  9. T

    Need heater/AC box wiring help

    I’ve looked in my manuals and online but can’t find what I’m looking for. Everything’s showing me something different. Does anyone have pictures or a diagram that shows me what wires go to what prong on the heater/ac box connector. I will attach pictures of what I’m talking about. All the wires...
  10. T

    Let’s see some small blocks and turbos!

    I really like the look of this setup but they seem incredibly hard to find for sale. I’ve also heard they hardly make any power difference?
  11. T

    Let’s see some small blocks and turbos!

    Wow that sounds impressive! I’d love to see that thing ‍
  12. T

    Let’s see some small blocks and turbos!

    Nobody in here has a turbo set up or has ever built an engine for boost?
  13. T

    Let’s see some small blocks and turbos!

    Anyone got pictures and/or specs on the build of small blocks with turbos? Let’s see ‘em! Any info on the subject is also appreciated! Thanks in advance!
  14. T

    3” header back exhaust pipe kit for 2wd?

    Here’s what I’ve got so far. 2.5” exhaust with Rumble Mufflers. This is the driver side. I was going to go with 3” pipe but decided that 2.5” was ok for me
  15. T

    3” header back exhaust pipe kit for 2wd?

    That looks great! I’ll check out that link you supplied and see what I can find. Thanks!
  16. T

    3” header back exhaust pipe kit for 2wd?

    Yup, I like the look and sound of a 3” exhaust system on a small block best. Unfortunately, I don’t have a welder as of right now, hopefully going to get one soon, but want an exhaust on my truck as soon as possible because it’s going to be my daily driver. If I had a welder I would get one of...
  17. T

    Lowest drop coil springs for c20/c30?

    So it’s probably not possible to achieve this look with the suspension square body’s have then… as I said in an earlier post, my neighbor has a Ford with this look, no bags, daily driver, and it works just fine. I guess it’s because of the twin I-beams ford has
  18. T

    3” header back exhaust pipe kit for 2wd?

    Hey everyone, I’m looking to get a 3” header back exhaust pipe kit for my c20 but everything I’m finding (reasonably priced) is for the k series. Does anyone know where I can get one for a 2wd? Or even a 2 1/2”? Thanks! (Here’s what I’m looking for but in 3”)
  19. T

    Lowest drop coil springs for c20/c30?

    Front wheels…
  20. T

    Lowest drop coil springs for c20/c30?

    I want the camber look. My neighbor has a ‘75 Ford that’s got the look I want but I know it’s easier to swap that springs on it because it’s an I-beam truck.
  21. T

    Sbc 350 vacuum hose help

    It’ll only work with an external vacuum pump like @SDTECH1 said.
  22. T

    Lowest drop coil springs for c20/c30?

    Like this. Says it’s a 6/8 drop.
  23. T

    Lowest drop coil springs for c20/c30?

    Hey everyone, I’ve been looking around for drop coil springs for up front and was wondering if anyone knew what’s the lowest I can go with just a spring? (No drop spindles) I’m even thinking about cutting a couple coils off the old spring because I can’t seem to find any 6” drop springs. I’m...
  24. T

    Finally found some 5x5 Turbines!!!

    Those and the five slot mags are my favorite rims. Nice find!
  25. T

    Did GM use Spicer parts from the factory?

    Ok, yeah mine are 30 spline. Thanks for all the information. It helps to have someone who understands there’s people like me that know nothing about some things and just need a little help :cool:

Latest posts

Forum statistics

Threads
48,419
Posts
1,067,015
Members
42,808
Latest member
bajadiver
Top