Search results

  1. H

    Music City Truck

    I will check that out. Thanks.
  2. H

    Music City Truck

    I enjoy watching these and the Engine Power show is cool to watch them build and dyno motors. I understand it has shortcomings, but I like it nonetheless. If I am looking for help on stuff I use YouTube for everything including non-automotive.
  3. H

    Music City Truck

    Power Nation's Misic City is just one of the shows. This is my favorite TV show. This K10 build is one of my favorite builds. Dana 60 crate axles retrofitted. All the episodes/shows viewable here too. https://www.powernationtv.com/projects/faux-guy-k10-square-body-truck
  4. H

    Shop4Seats have arrived!

    The seats are in! I put down Kilmat and new grey carpet that matches well. One issue bolting the frame down: I had to fashion 4 3/16" bolt spacers from flat bar stock steel along with longer bolts for the side brackets to mate up with stock floor holes. I will post some pics soon. :Also the...
  5. H

    86 C10 454 . Help with fuel return line. Pic's inside.

    Which fuel pump & carb do you have now and do I see 3 fuel filters?
  6. H

    86 C10 454 . Help with fuel return line. Pic's inside.

    Turbo4whl is correct on the third line, I just referred to it as a return line. . I use this for a vent instead of the cannister. A vented gas cap would not be best imho. The holley has a safety feature in case of rollover...
  7. H

    86 C10 454 . Help with fuel return line. Pic's inside.

    The stock mechanical fuel pump on my 86 truck had 3 lines also. 3/8" supply, 1/4" return and 5/16" cannister vent line. Are you sure your return is 5/16"? 1/4" would be too small for proper return line with an electric pump. I am using aftermarket braided PTFE lines now as I took all the other 3...
  8. H

    86 C10 454 . Help with fuel return line. Pic's inside.

    I don't know if it makes a difference but Holley's instructions for your regulator has the filters before the regulator. The reviews on your regulator on Summit are mixed good/bad...
  9. H

    86 C10 454 . Help with fuel return line. Pic's inside.

    I believe that only applies to EFI. This was included in my Aeromotive kit instructions. I have this kit: https://aeromotiveinc.com/product/carbureted-phantom-200-kit/ Here's a diagram included in instructions. Notice supply and return line is same size and regulator BEFORE the carb.
  10. H

    LMC EFI gas tank install

    That will be tough to find metric but they are available. This is for 10mm and there is other sizes. https://www.summitracing.com/parts/sum-220623b
  11. H

    Shop4Seats have arrived!

    Waiting on Kilmat to arrive then I will put the new carpet down followed by the seats. Next, I am gathering parts for a QA-1 coil over's front/rear plus Wilwood Pro Forged sealed bearing drop spindles. I already have front upper/lower control arms & spindles. The control arms are really nice!
  12. H

    LMC EFI gas tank install

    The supply line line gets the in-tank fuel pump, pick/up and a length of rubber hose I am guessing since it (filter) need to be positioned at the very bottom of tank
  13. H

    Shop4Seats have arrived!

    Thanks! https://shop4seats.com/
  14. H

    Shop4Seats have arrived!

    After waiting 3 months Fed Ex delivered in 4 boxes. 2 buckets, center console, and seat frame w/hardware that bolts into stock holes. If not for waiting to put the new carpet in, I could install these myself in about 30 minutes. I chose the solid color Moondust to go with my soon to be grey...
  15. H

    Front seat simple swap? Is there such a thing?

    I had those in my 97 Silverado truck that was stolen. I miss that truck.
  16. H

    454 intake manifold gaskets not sealing

    I like to chase all thread holes too and put thread sealant on cleaned bolts.
  17. H

    LMC bucket seats arrived.

    TKCR restores seat belts I don't know what she charges but does excellent work. http://www.67-72chevytrucks.com/vboard/showthread.php?t=809750&page=24
  18. H

    Bench Seat Rebuild

    LMC does not have seat back foam for 81-87 available (no one does but I could be mistaken) only for 73-80 which is a different seat frame. I still think the frames are crap but that's my opinion. https://www.lmctruck.com/1973-87-chevy-gmc/seats/cc-1973-87-replacement-bench-seat-cushions
  19. H

    Bench Seat Rebuild

    Stock seats are junk imho. There is no back foam available. https://shop4seats.com/truck-seats/40-20-40-truck-seats.html
  20. H

    Has anyone have experience using a bed lift?

    Yes, I have used 3 people from the neighborhood before and that worked ok but it's always a hassle trying to round up a few people. Thinking about using a cheap HF chain hoist and a couple of trees. Old school.
  21. H

    Has anyone have experience using a bed lift?

    Pics? Details?
  22. H

    Has anyone have experience using a bed lift?

    I've been thinking of getting one of these to use with an engine puller to do bodywork/paint. https://www.jegs.com/i/JEGS/555/81244/10002/-1 Anybody use one before?
  23. H

    Best split bench option

    I ordered these for my truck along with brackets that fit my truck and waiting on them. It takes a couple months to make them. https://shop4seats.com/truck-seats/40-20-40-truck-seats/all-bench-seats.html
  24. H

    Fuel pump wiring issue LS Swap

    It goes to any ignition "on" fuse under dash. Get test light and probe, Either piggy back a fuse or find an unused ignition socket and buy the right plug.
  25. H

    Serpentine Belt brackets

    My expensive GM serpentine belt kit with AC compressor on passengers' side has tall valve covers because I am using old Crane gold roller rockers. I did have to clock the alternator and will not be using the brace unless I can refigure it.

Latest posts

Forum statistics

Threads
48,424
Posts
1,067,203
Members
42,817
Latest member
crowe-t
Top