Making multipurpose shops work

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

AaronW

Full Access Member
Joined
Mar 24, 2021
Posts
182
Reaction score
174
Location
MT
First Name
Aaron
Truck Year
89
Truck Model
V3500
Engine Size
454
Hey everyone. So I'm mostly a woodworker, but am currently finishing up my 89 V3500, and have a good bit more mechanicing to do, in future, including on couple more squarebody pickups.

Anyway, I've got concrete floor on one side of my shop, and wood floor on the other, with one great big wood stove in the middle, to heat the whole thing. I'm noticing some challenges, trying to work on cars, weld, and so on, on the concerete side, simultaneously with doing furniture work, on the other side.

...so after that long intro, I'm wondering what those of you do, who do multiple different types of things, under the same shop roof. It's really nice, having all my tools under one roof, but dust control, for example, is going to be an issue. I'd be interested in seeing pics, of good ideas all of you ahve come up with.

aaron
 

Redfish

Full Access Member
Joined
Nov 6, 2021
Posts
2,373
Reaction score
12,753
Location
Prairieville, LA
First Name
Andrew
Truck Year
1987
Truck Model
V1500
Engine Size
350/5.7
I don't think you can keep sawdust from getting EVERYWHERE even if you had a good vacuum system. I am clearing ground for a shop right now and I already know that I cannot do wood work in there without contaminating everything else I do. I think you either need a wall and ceiling system to make completely separate rooms or you need another shop altogether.

But I am curious to see if anyone does have a system that works. Good thread, good question.
 

BearKing

Full Access Member
Joined
Apr 13, 2022
Posts
357
Reaction score
676
Location
Black Hills
First Name
Bear
Truck Year
1976
Truck Model
K10
Engine Size
400
Hey everyone. So I'm mostly a woodworker, but am currently finishing up my 89 V3500, and have a good bit more mechanicing to do, in future, including on couple more squarebody pickups.

Anyway, I've got concrete floor on one side of my shop, and wood floor on the other, with one great big wood stove in the middle, to heat the whole thing. I'm noticing some challenges, trying to work on cars, weld, and so on, on the concerete side, simultaneously with doing furniture work, on the other side.

...so after that long intro, I'm wondering what those of you do, who do multiple different types of things, under the same shop roof. It's really nice, having all my tools under one roof, but dust control, for example, is going to be an issue. I'd be interested in seeing pics, of good ideas all of you ahve come up with.

aaron
I was forced to use my car shop for a wood working project for my daughters wedding. NEVER AGAIN. Stupid idea to use wood and metal working in the same shop. Very small woodworking projects like gluing something would be ok but cutting, sanding, shaping and using a router would be dumb in my opinion. The wood dust gets into EVERY crack or seam on EVERYTHING. It took me over a year to get my car shop back to the way it was before I was building wood stuff for my child. I am a master cabinet builder and woodworker also. I have all the tools to run a cabinet making shop but now I keep them FAR away from my auto shop. What pain it is when you put sawdust into the works of your stored cars/trucks. Just my experience. It means nothing so at least there’s that.
 

Shorty81

Baby Boomer
Joined
Mar 19, 2018
Posts
2,850
Reaction score
5,056
Location
North West ohio
First Name
Darren
Truck Year
86
Truck Model
K20
Engine Size
496
My bandsaw makes a huge mess. I run it outside mostly. We are building a 72" wide x 144" long planer table. Going to hook up to large dust collector .
 

Attachments

  • IMG_20220320_180947_hdr.jpg
    IMG_20220320_180947_hdr.jpg
    208.6 KB · Views: 57

AaronW

Full Access Member
Joined
Mar 24, 2021
Posts
182
Reaction score
174
Location
MT
First Name
Aaron
Truck Year
89
Truck Model
V3500
Engine Size
454
I've got a large, 4500 cfm dust collector, that sits outside my shop wall, with a trunk line that goes under my footer and then under the shop floor and which I'm gradually getting all my tools hooked up to. I've been contemplating some sort of large plastic curtain between the two sides of my shop, maybe with one of those zipper doors, like you see on job sites. Curious if someone has tried such a plan. Shen I get a minute, I'll post a few pics of myshop, maybe a visual on the layout might assist the collective wisdom.

Aaron
 

StickyLifter

Supporting Member
Supporting Member
Joined
May 28, 2022
Posts
144
Reaction score
250
Location
N/A
First Name
Screw You Homophobes
Truck Year
N/A
Truck Model
N/A
Engine Size
N/A
I don't have wood working equipment, but my shop area also stores our yard equipment and my wife's potting bench area. For me, the biggest culprit is my angle grinder when I sharpen my mower blades. I have a good setup for sharpening blades and I mow two acres, so I tend to sharpen my blades every 2nd or 3rd mow. I've gotten so I either take my equipment outside or at least point the grinder out the garage door. That helps a lot.

Now if I could just find a way to keep tools and crap from accumulating on top of my tool chest and bench ;)
 

Soundmound

Full Access Member
Joined
Feb 15, 2022
Posts
1,715
Reaction score
5,136
Location
North Central Washington
First Name
Dave
Truck Year
1984
Truck Model
Scottsdale
Engine Size
305
Now if I could just find a way to keep tools and crap from accumulating on top of my tool chest and bench ;)
In one of my previous careers we call those NFS's or Nearest Flat Surface. Always accumulating crap because folks didn't want to cross the warehouse lol. It's a hard habit to break.
 

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
5,882
Reaction score
9,622
Location
Washington
First Name
Todd
Truck Year
1986
Truck Model
K20
Engine Size
454
For me, the biggest culprit is my angle grinder when I sharpen my mower blades. I have a good setup for sharpening blades and I mow two acres, so I tend to sharpen my blades every 2nd or 3rd mow.
What in the _____?
 

Redfish

Full Access Member
Joined
Nov 6, 2021
Posts
2,373
Reaction score
12,753
Location
Prairieville, LA
First Name
Andrew
Truck Year
1987
Truck Model
V1500
Engine Size
350/5.7
I don't have wood working equipment, but my shop area also stores our yard equipment and my wife's potting bench area. For me, the biggest culprit is my angle grinder when I sharpen my mower blades. I have a good setup for sharpening blades and I mow two acres, so I tend to sharpen my blades every 2nd or 3rd mow. I've gotten so I either take my equipment outside or at least point the grinder out the garage door. That helps a lot.

Now if I could just find a way to keep tools and crap from accumulating on top of my tool chest and bench ;)
I cut about two acres here and another two acres at my parent's home. I usually swap blades twice per year but the dust from the blade sharpening doesn't affect me at all. My setup is Much Better than yours. I just leave the dull blades at Pop's and the next time I go to cut his yard the blades are magically re-sharpened! I could certainly do it myself but it is more fun this way. And I don't have that gray dust all over MY shop.

You must be registered for see images attach


You must be registered for see images attach
 

1979 c20

Full Access Member
Joined
Jun 28, 2022
Posts
369
Reaction score
172
Location
Oregon
First Name
Rat
Truck Year
1979
Truck Model
C20
Engine Size
454
Yeah, goats won't shape that so nicely. :Pshyco:
 

StickyLifter

Supporting Member
Supporting Member
Joined
May 28, 2022
Posts
144
Reaction score
250
Location
N/A
First Name
Screw You Homophobes
Truck Year
N/A
Truck Model
N/A
Engine Size
N/A
I cut about two acres here and another two acres at my parent's home. I usually swap blades twice per year but the dust from the blade sharpening doesn't affect me at all. My setup is Much Better than yours. I just leave the dull blades at Pop's and the next time I go to cut his yard the blades are magically re-sharpened! I could certainly do it myself but it is more fun this way. And I don't have that gray dust all over MY shop.
Yeah, I can't compete with that!

Part of the reason I sharpen mine all the time is river rock from our landscaping seems to always find a way to get into the grass and my blades get beat up pretty bad. I bought an All American blade sharpening system last summer. Expensive, but it works very well. I have three sets of blades for my deck and sharpen them all at once. I'd guess I can sharpen all 9 blades in 40 minutes or less.
 

67ventwindow

Full Access Member
Joined
Jun 8, 2022
Posts
65
Reaction score
75
Location
Missouri
First Name
Kevin
Truck Year
1986
Truck Model
C30
Engine Size
454
I am not a big wood worker. I have a table saw, band saw and a router table. I set them up in the horses shower stall it has cross ventilation and easy to clean up. If I don't need one of the three I just do it outside. I don't have much to cleanup that way. In my garage, I do have a little corner for my grinder and I use my MIG outside most of the time. My biggest mess maker is my vise. But I have been thinking about mounting a vise on the rear bumper of my truck. My Dad and uncles always had one on theirs I guess that is the reason.
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
28,956
Reaction score
23,466
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
What in the _____?

That's what I'm saying, lol. I've been mowing ~5 acres for the last 10+ years. Kids leave toys hidden in the grass, garden tools in the grass, big rocks in the grass and I've been known to mow down volunteer shrubs and bushes with 1" trunks... I might sharpen blades once a year. But it's normally every other year.

I guess John Deere and vintage Cub Cadet blades are better quality than others.
 

wanderinthru

Full Access Member
Joined
Jul 23, 2020
Posts
1,170
Reaction score
2,046
Location
Mid Point Route 66
First Name
Shakey
Truck Year
81, 70, 75, 84, 89
Truck Model
K 10, C 30, K 20
Engine Size
350
Hey everyone. So I'm mostly a woodworker, but am currently finishing up my 89 V3500, and have a good bit more mechanicing to do, in future, including on couple more squarebody pickups.

Anyway, I've got concrete floor on one side of my shop, and wood floor on the other, with one great big wood stove in the middle, to heat the whole thing. I'm noticing some challenges, trying to work on cars, weld, and so on, on the concerete side, simultaneously with doing furniture work, on the other side.

...so after that long intro, I'm wondering what those of you do, who do multiple different types of things, under the same shop roof. It's really nice, having all my tools under one roof, but dust control, for example, is going to be an issue. I'd be interested in seeing pics, of good ideas all of you ahve come up with.

aaron
They don't work! Unless they are huge or cut into rooms. Mine is cut into rooms, one is the "clean" machine shop, lathes, mills work tables for jobs and where any engine work goes on. I will not bring a grinder into this room, does have a little bench grinder where I touch up drill bits cutting tools etc.. it won't run a half hour a year. Other room is where all the cutting welding,grinding, and where the bench and belt grinders are set up the "dirty" work happens in there.. The race car is in it as well.

Edit ro add. The heavy plastic curtian works pretty well, have used one in the past. Though not sure how it would get along with the heater?
 

CalSgt

Full Access Member
Joined
Oct 3, 2021
Posts
1,466
Reaction score
3,046
Location
CA
First Name
Casey
Truck Year
1980
Truck Model
Chevy K-10 Custom Deluxe
Engine Size
350
That's what I'm saying, lol. I've been mowing ~5 acres for the last 10+ years. Kids leave toys hidden in the grass, garden tools in the grass, big rocks in the grass and I've been known to mow down volunteer shrubs and bushes with 1" trunks... I might sharpen blades once a year. But it's normally every other year.

I guess John Deere and vintage Cub Cadet blades are better quality than others.
^^^ This except for way less acreage
 

Latest posts

Forum statistics

Threads
41,850
Posts
903,462
Members
33,362
Latest member
Dhatch84
Top