ID this rocker step hole for me

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Trucksareforwork

Supporting Member
Supporting Member
Joined
Feb 22, 2022
Posts
228
Reaction score
449
Location
Spartanburg SC
First Name
Geoff
Truck Year
1985
Truck Model
C10
Engine Size
305
So I have been working on my 85 c10. One of the weird things about the truck is it is basically rust free on the cab and bed…EXCEPT it had a (bad) rust hole on the top of the driver side rocker.

The rocker panel itself is solid but it had this relatively ragged hold in the top. I figured somebody must have punctured it and never repaired it. Anyhow, I have done the repair (here’s a picture of the welded spot - yes, I’m an amateur).
You must be registered for see images attach


Today I ran across an 84 c10 on auction at Hemmings. Only it had what looks like a grommet in that spot. Here it is:
You must be registered for see images attach



Why would that step have a hole in it?

My truck was a camper truck and so is the one in this picture. This is not urgent it will just help me solve the mystery of the random rust hole in my truck’s step. Is this a common thing and I just don’t know c10s?
 

Trucksareforwork

Supporting Member
Supporting Member
Joined
Feb 22, 2022
Posts
228
Reaction score
449
Location
Spartanburg SC
First Name
Geoff
Truck Year
1985
Truck Model
C10
Engine Size
305
Ok. I went back and looked at the listed truck and I'm thinking I'm on the wrong track. If it were rust proofing on MY truck, I would think both rockers would be drilled. The one listed is drilled on both sides.

Mine only had the rust hole (a HOLE about the size of a quarter, with cancer all around it) on the driver side. I guess somebody just wore the paint off and never fixed it sometime over the last nearly 30 years.
 

Ken B

Full Access Member
Joined
Sep 18, 2019
Posts
1,061
Reaction score
1,242
Location
indiana
First Name
ken
Truck Year
81
Truck Model
c10
Engine Size
250
Rust proofing like a company called rust check they drilled dozens of holes and injected oil like substance then it would rip/drain for hours on a lift
 

CalSgt

Full Access Member
Joined
Oct 3, 2021
Posts
1,466
Reaction score
3,046
Location
CA
First Name
Casey
Truck Year
1980
Truck Model
Chevy K-10 Custom Deluxe
Engine Size
350
So I have been working on my 85 c10. One of the weird things about the truck is it is basically rust free on the cab and bed…EXCEPT it had a (bad) rust hole on the top of the driver side rocker.

The rocker panel itself is solid but it had this relatively ragged hold in the top. I figured somebody must have punctured it and never repaired it. Anyhow, I have done the repair (here’s a picture of the welded spot - yes, I’m an amateur).
You must be registered for see images attach


Today I ran across an 84 c10 on auction at Hemmings. Only it had what looks like a grommet in that spot. Here it is:
You must be registered for see images attach



Why would that step have a hole in it?

My truck was a camper truck and so is the one in this picture. This is not urgent it will just help me solve the mystery of the random rust hole in my truck’s step. Is this a common thing and I just don’t know c10s?
Repair looks good to me...
 

Trucksareforwork

Supporting Member
Supporting Member
Joined
Feb 22, 2022
Posts
228
Reaction score
449
Location
Spartanburg SC
First Name
Geoff
Truck Year
1985
Truck Model
C10
Engine Size
305
Repair looks good to me...
Thanks.

It came out pretty well given the problem and my chosen solution (welding a patch into it). I have the jambs painted but not sanded, cut or buffed and you can see a little bit of a dimple from my filler skills (or maybe just a little warp) where the ragged hole used to be. Luckily my less beautiful tack welds will be under the weatherstrip.

You must be registered for see images attach
 

Forum statistics

Threads
41,850
Posts
903,456
Members
33,362
Latest member
Dhatch84
Top