swapping gear ratio in the 14 bolt??

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

75k20

Full Access Member
Joined
Feb 13, 2022
Posts
61
Reaction score
11
Location
Commie-fornia
First Name
John
Truck Year
1975
Truck Model
k20
Engine Size
350
i’ve been daily driving with the sm465 and 4.56 gears for a while now and i need something more suitable for everyday use. my mileage came back at 8.3mpg and i need to get my rpms a little lower while cruising. not to mention how slow i am speeding up..

right now i don’t use 4wd as it’s missing a right axle shaft entirely. so for budget reasons i’d probably want to just swap the rear for now.

what’re some good options on a budget? and what’s a good gear ratio to go for? let me know if you have any other ideas to help with mileage as well
 

nvrenuf

Full Access Member
Joined
Jul 30, 2010
Posts
1,689
Reaction score
1,874
Location
Mobile, Al.
First Name
John
Truck Year
1991
Truck Model
K5
Engine Size
454
Tire size?

Just fyi, with no inner axle at all in the front water / dirt / debris can freely get in to both the diff area and the locking hub / wheel bearings.
 

75k20

Full Access Member
Joined
Feb 13, 2022
Posts
61
Reaction score
11
Location
Commie-fornia
First Name
John
Truck Year
1975
Truck Model
k20
Engine Size
350
Tire size?

Just fyi, with no inner axle at all in the front water / dirt / debris can freely get in to both the diff area and the locking hub / wheel bearings.
33x12.50 tires 17 wheels

it’s next up on the long list of fixing stuff, but i don’t know if there’s any difference between the dana 44 axle shafts, or what seals i need.
 

crpntr78

Full Access Member
Joined
Jan 8, 2016
Posts
529
Reaction score
411
Location
Missouri
First Name
Jerry
Truck Year
86
Truck Model
K10
Engine Size
350
There's a guy on here from Australia, posted the other day with pretty much the same set up as you and he's going with a 3:21 ratio.
 

75k20

Full Access Member
Joined
Feb 13, 2022
Posts
61
Reaction score
11
Location
Commie-fornia
First Name
John
Truck Year
1975
Truck Model
k20
Engine Size
350
There's a guy on here from Australia, posted the other day with pretty much the same set up as you and he's going with a 3:21 ratio.
is there a good company that i should go with? i’m not looking to gain more speed, fastest i’d want to go would probably be 55 or 60, feels like i’m pushing the truck just to get up to 50
 

nvrenuf

Full Access Member
Joined
Jul 30, 2010
Posts
1,689
Reaction score
1,874
Location
Mobile, Al.
First Name
John
Truck Year
1991
Truck Model
K5
Engine Size
454
I don’t think anyone makes a front ratio that would work with the 3.21’s.
 

75k20

Full Access Member
Joined
Feb 13, 2022
Posts
61
Reaction score
11
Location
Commie-fornia
First Name
John
Truck Year
1975
Truck Model
k20
Engine Size
350
I don’t think anyone makes a front ratio that would work with the 3.21’s.

would something like 3.73s be suitable? that would put me at 55mph and 2000rpm
 

Turbo4whl

Supporting Member
Supporting Member
Joined
Oct 30, 2019
Posts
2,837
Reaction score
6,356
Location
Downingtown, PA
First Name
Wayne
Truck Year
1974
Truck Model
Jimmy
Engine Size
350
I don’t think anyone makes a front ratio that would work with the 3.21’s.
Correct!

Some common GM ratios:
GQ1 -- AXLE REAR, STD RATIO
GT4 -- AXLE REAR, 3.73 RATIO
GT5 -- AXLE REAR, 4.10 RATIO
GU4 -- AXLE REAR, 3.08 RATIO (3.07:1)
GU5 -- AXLE REAR, 3.23 RATIO
GU6 -- AXLE REAR, 3.42 RATIO
G80 -- AXLE REAR, LIMITED SLIP

would something like 3.73s be suitable? that would put me at 55mph and 2000rpm

Yes, better choice.

Remember your 1975 Square was designed/ engineered when fuel was $.30 a gallon. Good daily fuel mileage is not something you will get from your truck.
 

Shorty81

Baby Boomer
Joined
Mar 19, 2018
Posts
2,850
Reaction score
5,056
Location
North West ohio
First Name
Darren
Truck Year
86
Truck Model
K20
Engine Size
496
I'm running 3.73 in K20. 496/sm465, 32" tires. 2000 rpm at 55. 11 mpg. Truck is very happy with this setup.
 

77 K20

Full Access Member
Joined
Nov 9, 2012
Posts
3,075
Reaction score
3,044
Location
Montana
First Name
Mike
Truck Year
1977
Truck Model
K20 5" lift
Engine Size
HT383 fuel injected
If I remember right you can't just put higher gears in your 14 bolt without changing out the carrier. The break was between 4.10 and 4.56
 

nvrenuf

Full Access Member
Joined
Jul 30, 2010
Posts
1,689
Reaction score
1,874
Location
Mobile, Al.
First Name
John
Truck Year
1991
Truck Model
K5
Engine Size
454
On a full floater 14 bolt, the carrier break is up to 4.10 and 4.56+. His 4.56 carrier will not work for higher ratios.
 

77 K20

Full Access Member
Joined
Nov 9, 2012
Posts
3,075
Reaction score
3,044
Location
Montana
First Name
Mike
Truck Year
1977
Truck Model
K20 5" lift
Engine Size
HT383 fuel injected
You must be registered for see images attach
 

75k20

Full Access Member
Joined
Feb 13, 2022
Posts
61
Reaction score
11
Location
Commie-fornia
First Name
John
Truck Year
1975
Truck Model
k20
Engine Size
350
Correct!

Some common GM ratios:
GQ1 -- AXLE REAR, STD RATIO
GT4 -- AXLE REAR, 3.73 RATIO
GT5 -- AXLE REAR, 4.10 RATIO
GU4 -- AXLE REAR, 3.08 RATIO (3.07:1)
GU5 -- AXLE REAR, 3.23 RATIO
GU6 -- AXLE REAR, 3.42 RATIO
G80 -- AXLE REAR, LIMITED SLIP



Yes, better choice.

Remember your 1975 Square was designed/ engineered when fuel was $.30 a gallon. Good daily fuel mileage is not something you will get from your truck.

i measured out the gears and it turned out to be 4.10s instead of 4.56s

can’t complain but still not the best for a daily driver.
350/465/205/4.10 33” should be a decent enough setup for now. thanks for the responses
 

Latest posts

Forum statistics

Threads
41,856
Posts
903,619
Members
33,370
Latest member
mitchell1128
Top