High Roller Ron
Full Access Member
- Joined
- Sep 14, 2021
- Posts
- 53
- Reaction score
- 9
- Location
- Brandenburg Ky.
- First Name
- Ron
- Truck Year
- 1977 Chevy 4x4 swb
- Truck Model
- Chevy 4x4
- Engine Size
- 350
Maybe some one can help me determine what transfer case
What type of transfer case do I have in my truck ?
- Thread starter High Roller Ron
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
High Roller Ron
Full Access Member
- Joined
- Sep 14, 2021
- Posts
- 53
- Reaction score
- 9
- Location
- Brandenburg Ky.
- First Name
- Ron
- Truck Year
- 1977 Chevy 4x4 swb
- Truck Model
- Chevy 4x4
- Engine Size
- 350
Vbb199
B-rate Hillbilly Customs
- Joined
- Jan 12, 2018
- Posts
- 8,875
- Reaction score
- 14,900
- Location
- Salisbury NC
- First Name
- Vince
- Truck Year
- 89, 79
- Truck Model
- 89 Suburban R1500, 79 C10
- Engine Size
- 350, 502
Appears to be a np205 
High Roller Ron
Full Access Member
- Joined
- Sep 14, 2021
- Posts
- 53
- Reaction score
- 9
- Location
- Brandenburg Ky.
- First Name
- Ron
- Truck Year
- 1977 Chevy 4x4 swb
- Truck Model
- Chevy 4x4
- Engine Size
- 350
Next question.... will the 205 mate up to a NV4500 ?
Research I did ( small amount ) says I need a 208 transfercase to go behind a NV4500 ??
Research I did ( small amount ) says I need a 208 transfercase to go behind a NV4500 ??
SDJunkMan
Full Access Member
- Joined
- Nov 17, 2017
- Posts
- 1,794
- Reaction score
- 2,632
- Location
- Black Hills of South Dakota
- First Name
- Jeff
- Truck Year
- 1978
- Truck Model
- K10
- Engine Size
- 350
Probably need an adapter, possibly a different input shaft, depending on what transmission is currently in it.
- Joined
- Oct 30, 2019
- Posts
- 2,870
- Reaction score
- 6,444
- Location
- Downingtown, PA
- First Name
- Wayne
- Truck Year
- 1974
- Truck Model
- Jimmy
- Engine Size
- 350
NP203
PrairieDrifter
Full Access Member
- Joined
- Dec 28, 2014
- Posts
- 3,451
- Reaction score
- 4,553
- Location
- North Dakota
- First Name
- Mason
- Truck Year
- 84,79,77,70,48
- Truck Model
- Suburban k10, bonanza k10, c30 C&C, c10, gmc 1/2ton
- Engine Size
- 350, 350, 350, 350, 350
100% np203
It will not mate up, there might be an adapter with all the doubler builds, but will be pricey.
It will not mate up, there might be an adapter with all the doubler builds, but will be pricey.
High Roller Ron
Full Access Member
- Joined
- Sep 14, 2021
- Posts
- 53
- Reaction score
- 9
- Location
- Brandenburg Ky.
- First Name
- Ron
- Truck Year
- 1977 Chevy 4x4 swb
- Truck Model
- Chevy 4x4
- Engine Size
- 350
If i need an adapter then that makes my driveshafts the wrong lengths too... lol...
Ive seen a video were a guy has a 305 sb with 700r4 tranny and the swop to NV3500 np208 was all a direct bolt it...
Seems that im looking for a donor truck lol
Ive seen a video were a guy has a 305 sb with 700r4 tranny and the swop to NV3500 np208 was all a direct bolt it...
Seems that im looking for a donor truck lol
nvrenuf
Full Access Member
- Joined
- Jul 30, 2010
- Posts
- 1,716
- Reaction score
- 1,922
- Location
- Mobile, Al.
- First Name
- John
- Truck Year
- 1991
- Truck Model
- K5
- Engine Size
- 454
Agreed, it’s definitely a 203.
A 4500 will have a 32 spline tailshaft so your 203 will need to be from a th400 for the input spline count to be correct. (th350/203 is 27, the rare 4spd/203 combo is 10).
A 4500 will have a 32 spline tailshaft so your 203 will need to be from a th400 for the input spline count to be correct. (th350/203 is 27, the rare 4spd/203 combo is 10).
High Roller Ron
Full Access Member
- Joined
- Sep 14, 2021
- Posts
- 53
- Reaction score
- 9
- Location
- Brandenburg Ky.
- First Name
- Ron
- Truck Year
- 1977 Chevy 4x4 swb
- Truck Model
- Chevy 4x4
- Engine Size
- 350
Hold on guys im going to get a 205 if thas the most desirable case to have !
To find out that my 203 is full time all time im not good with that...
And if the NV 4500 is the best tranny then I will get that one too...only crappy thing are my driveshafts....looks like im gonna have to spend money of newly rebuilt shafts...
To find out that my 203 is full time all time im not good with that...
And if the NV 4500 is the best tranny then I will get that one too...only crappy thing are my driveshafts....looks like im gonna have to spend money of newly rebuilt shafts...
High Roller Ron
Full Access Member
- Joined
- Sep 14, 2021
- Posts
- 53
- Reaction score
- 9
- Location
- Brandenburg Ky.
- First Name
- Ron
- Truck Year
- 1977 Chevy 4x4 swb
- Truck Model
- Chevy 4x4
- Engine Size
- 350
If a 205 bolts to a NV4500 what year NV4500 will I need of course it will be bolting to a 350 4 barrel....
High Roller Ron
Full Access Member
- Joined
- Sep 14, 2021
- Posts
- 53
- Reaction score
- 9
- Location
- Brandenburg Ky.
- First Name
- Ron
- Truck Year
- 1977 Chevy 4x4 swb
- Truck Model
- Chevy 4x4
- Engine Size
- 350
Bextreme04
Full Access Member
- Joined
- May 13, 2019
- Posts
- 4,182
- Reaction score
- 5,075
- Location
- Oregon
- First Name
- Eric
- Truck Year
- 1980
- Truck Model
- K25
- Engine Size
- 350-4bbl
There are several different types of NP205 with various input splines, types, and bolt patterns. A figure 8 NP205 needs about a $600 adapter kit to bolt up properly. The kit linked below is specific for 10 spline input, but there are multiple kits for the various input types on the figure 8 units. https://www.polyperformance.com/adv...FID8klWgd9lSysJtSbCyTEIJ7UfR_1HxoCj94QAvD_BwE
The other option would be a round pattern NP205 from an 85-up 1 ton truck. There are a few of those as well, and it looks like you would need about $150 in parts and some machine work to get them to fit. Here's a thread on Pirate 4x4 talking about those two options. https://www.pirate4x4.com/threads/gm-nv4500-to-np205-round-pattern-with-32-spline-input.2706862/
The other option would be a round pattern NP205 from an 85-up 1 ton truck. There are a few of those as well, and it looks like you would need about $150 in parts and some machine work to get them to fit. Here's a thread on Pirate 4x4 talking about those two options. https://www.pirate4x4.com/threads/gm-nv4500-to-np205-round-pattern-with-32-spline-input.2706862/
Similar threads
