Kicking around doing an LS swap

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

R Carnella

Supporting Member
Supporting Member
Joined
Sep 21, 2017
Posts
359
Reaction score
752
Location
Long island
First Name
Rich
Truck Year
1990
Truck Model
Suburban V2500
Engine Size
5.3
I run a 04 5.3 4L60E in my v2500 burb. I ran a micro switch down to my shifter that tells the ecm when im in low range otherwise low range will not work/shift properly
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
 

SquareRoot

Full Access Member
Joined
Mar 18, 2017
Posts
3,659
Reaction score
6,602
Location
Arizona
First Name
Mike
Truck Year
85
Truck Model
K20
Engine Size
350
I run a 04 5.3 4L60E in my v2500 burb. I ran a micro switch down to my shifter that tells the ecm when im in low range otherwise low range will not work/shift properly
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
That's one badass and beautiful vehicle. Well done!
 

hoagster

Full Access Member
Joined
May 16, 2017
Posts
1,288
Reaction score
3,202
Location
California
First Name
Mike
Truck Year
1973, 2000
Truck Model
K10, 1500
Engine Size
5.3l
Here's another option if you use a np205 @ off road design that I'm kicking around still.
You must be registered for see images attach
 

Bextreme04

Full Access Member
Joined
May 13, 2019
Posts
4,135
Reaction score
4,984
Location
Oregon
First Name
Eric
Truck Year
1980
Truck Model
K25
Engine Size
350-4bbl
Here's another option if you use a np205 @ off road design that I'm kicking around still.
You must be registered for see images attach
Except that removes the mechanical drive and replaces it with a tone wheel and VSS sensor. So you cant keep a mechanical speedo while using that. At that point you might as well just get the Dakota digital 128k sensor for half the price and no downtime.
 

Christian Nelson

Full Access Member
Joined
Sep 8, 2011
Posts
296
Reaction score
34
Location
Wisconsin
First Name
Christian
Truck Year
77
Truck Model
K15
Engine Size
400
If you are set on doing an LS swap, by all means, go for it. But your statement that you can't get better than 8 mpg with small block, and 700r4 tells me something is seriously wrong with your engine, or something. Is it geared too low/high? is there a major fuel line leak? Only truck I had that got that bad of mpg, it was leaking fuel where I didn't notice, and it had 4.56 gearing with no OD.

I had another truck I got 10mpg out of, again geared low with no OD, it had 4.10 gearing.

My half ton back in the 90's used to get 12-14 with 36" tires, and no OD, 3.73 gears.

My current 84 with 700r4 gets 12-14, not sure the gears, but 32" tires.

Something else is up, maybe LS swap will improve it, but you may be able to figure it out without that.
 

Vbb199

B-rate Hillbilly Customs
Joined
Jan 12, 2018
Posts
8,871
Reaction score
14,885
Location
Salisbury NC
First Name
Vince
Truck Year
89, 79
Truck Model
89 Suburban R1500, 79 C10
Engine Size
350, 502
If you are set on doing an LS swap, by all means, go for it. But your statement that you can't get better than 8 mpg with small block, and 700r4 tells me something is seriously wrong with your engine, or something. Is it geared too low/high? is there a major fuel line leak? Only truck I had that got that bad of mpg, it was leaking fuel where I didn't notice, and it had 4.56 gearing with no OD.

I had another truck I got 10mpg out of, again geared low with no OD, it had 4.10 gearing.

My half ton back in the 90's used to get 12-14 with 36" tires, and no OD, 3.73 gears.

My current 84 with 700r4 gets 12-14, not sure the gears, but 32" tires.

Something else is up, maybe LS swap will improve it, but you may be able to figure it out without that.


I agree with this ^
 

LateOnTheBrakes

5.3-Swapped 86 CUCV
Joined
Feb 2, 2020
Posts
463
Reaction score
123
Location
Virginia
First Name
Joshua
Truck Year
1986
Truck Model
CUCV
Engine Size
5.3
For what it's worth I get 16 mpg with my 5.3 LS swap. I am running the SM465 to the NP208 with a 3.08 gear and 33" tires.
 

RoryH19

Full Access Member
Joined
Aug 21, 2015
Posts
1,668
Reaction score
1,081
Location
Texas
First Name
Rory
Truck Year
1987
Truck Model
R10 Silverado SWB
Engine Size
350 TBI
I run a 04 5.3 4L60E in my v2500 burb. I ran a micro switch down to my shifter that tells the ecm when im in low range otherwise low range will not work/shift properly
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
I need to do the same for my t-case.
What micro switch did you use and do you have any pics under the cover?
 

RoryH19

Full Access Member
Joined
Aug 21, 2015
Posts
1,668
Reaction score
1,081
Location
Texas
First Name
Rory
Truck Year
1987
Truck Model
R10 Silverado SWB
Engine Size
350 TBI
To OP. Check my k5 build. I cover most of what you need to know.
I run a LQ9 6.0LS/4L65E from an 04 Escalade and NP241c from a 90 burb along with the gauge cluster.
 

SquareRoot

Full Access Member
Joined
Mar 18, 2017
Posts
3,659
Reaction score
6,602
Location
Arizona
First Name
Mike
Truck Year
85
Truck Model
K20
Engine Size
350
Except that removes the mechanical drive and replaces it with a tone wheel and VSS sensor. So you cant keep a mechanical speedo while using that. At that point you might as well just get the Dakota digital 128k sensor for half the price and no downtime.
I lost the cheesy analog OEM gauges and put in a Dakota Digital dash. The kit comes with the adapter. I also had my 205 housing modified by ORD before I bought the gauges. I haven't swapped the 205 for the 208 yet but its a sweet setup. And the Dakota cruise control is even more sweet.
 

R Carnella

Supporting Member
Supporting Member
Joined
Sep 21, 2017
Posts
359
Reaction score
752
Location
Long island
First Name
Rich
Truck Year
1990
Truck Model
Suburban V2500
Engine Size
5.3
RoryH19 what micro switch did you use and do you have any pics under the cover?


Sorry no more pics but this is the switch I used. I just removed the shifter gate plate and epoxied the switch to the bottom side and positioned it just right. Then i just bolted the plate back on.If you look closely at the pic you
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
can see the switch wheel just peeking through. I also use this signal and the tranfer case switch signal for the instrument cluster to indicate when it in 4x4 and low range on/off.
 
Last edited:

R Carnella

Supporting Member
Supporting Member
Joined
Sep 21, 2017
Posts
359
Reaction score
752
Location
Long island
First Name
Rich
Truck Year
1990
Truck Model
Suburban V2500
Engine Size
5.3
O forgot to mention the shifter gate plate is very hard steel and almost impossible to drill through hence the epoxy.
 

Bextreme04

Full Access Member
Joined
May 13, 2019
Posts
4,135
Reaction score
4,984
Location
Oregon
First Name
Eric
Truck Year
1980
Truck Model
K25
Engine Size
350-4bbl
I lost the cheesy analog OEM gauges and put in a Dakota Digital dash. The kit comes with the adapter. I also had my 205 housing modified by ORD before I bought the gauges. I haven't swapped the 205 for the 208 yet but its a sweet setup. And the Dakota cruise control is even more sweet.
I'm using 91 Suburban gauge with a tach and the original 205 on mine. No modification to add the VSS. I just used the 128k dakota digital adapter. Stock 97 K2500 suburban cruise control module and a Rostra retrofit cruise control turn signal stem to control it. Cluster was $50 and $112 for the sensor. Looks completely 1980 stock, but functions like a 97 Suburban.
 

Bruce Wingate

Full Access Member
Joined
May 20, 2021
Posts
146
Reaction score
82
Location
Long Island
First Name
Bruce
Truck Year
1984
Truck Model
K10
Engine Size
350
If you are set on doing an LS swap, by all means, go for it. But your statement that you can't get better than 8 mpg with small block, and 700r4 tells me something is seriously wrong with your engine, or something. Is it geared too low/high? is there a major fuel line leak? Only truck I had that got that bad of mpg, it was leaking fuel where I didn't notice, and it had 4.56 gearing with no OD.

I had another truck I got 10mpg out of, again geared low with no OD, it had 4.10 gearing.

My half ton back in the 90's used to get 12-14 with 36" tires, and no OD, 3.73 gears.

My current 84 with 700r4 gets 12-14, not sure the gears, but 32" tires.

Something else is up, maybe LS swap will improve it, but you may be able to figure it out without that.
My last tank got me 9.5 mpg. And I've been driving like a grandpa (sorry to all the grandpa's out there). I'm not looking to win any contests, but I'm hoping for 12 - 14 mpg. I knew mileage was going to be an issue when I bought the truck, but at one point it was down to under 6. I want better mileage mostly for convenience so I can go farther than 100 miles on a tank.

I've been working my way through the "other problems" and resolved a really rich condition and a few other carb related issues. I have not popped the Quadrajet off to look for leaking well plugs yet. That is on my to do list along with checking that the 700r4 is shifting into OD correctly (I think I am going to have to rig up a test light at the solenoid). I haven't done a leak/smoke test to look for vacuum leaks but have sprayed starting fluid all over the place with no changes and I haven't checked compression.

The LS swap is either going to be the last resort or if I come across a windfall. Right now, I am asking myself (and you guys) what I would need if I were going to do this so I can lay everything out to SWMBO for project approval.
 

Bruce Wingate

Full Access Member
Joined
May 20, 2021
Posts
146
Reaction score
82
Location
Long Island
First Name
Bruce
Truck Year
1984
Truck Model
K10
Engine Size
350
You must be registered for see images attach
I'm slightly confused - you have a Dakota Digital speedo - don't they take an electronic signal off the transfer case to keep the MPH correct? Or was that switch specifically to tell the computer you were in low gear?
 

Latest posts

Forum statistics

Threads
41,857
Posts
903,631
Members
33,370
Latest member
mitchell1128
Top