402 BBC

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Frankinmetz

Member
Joined
May 5, 2021
Posts
34
Reaction score
30
Location
Indiana
First Name
Nick
Truck Year
1981
Truck Model
1500
Engine Size
305
Just bought a 402 big block with the original heads. I'm thinking about leaving the bottom end all stock and only doing performance parts on the top end. I've seen where guys get almost 550 horse from just doing that. Anybody else here put a 402 big block in their C10? Wanting to turn this into a daily driver with a little bit of kick behind it.
You must be registered for see images attach
You must be registered for see images attach


Sent from my LM-G710VM using Tapatalk
 

BillK

Member
Joined
Feb 11, 2021
Posts
41
Reaction score
25
Location
Waldorf Md
First Name
Bill
Truck Year
1985
Truck Model
Blazer
Engine Size
350
If the rest of the block looks as bad as what is in your picture I would not waste another second on it. Looks like it has been sitting in the ocean for a few years :( Your machine shop could tell you for sure but thats my opinion going by the one picture.
 

Frankinmetz

Member
Joined
May 5, 2021
Posts
34
Reaction score
30
Location
Indiana
First Name
Nick
Truck Year
1981
Truck Model
1500
Engine Size
305
It's been stored in a lean-to-barn for about 4 years, so most of that's just surface rust. I am taking it to a local machine shop to have it magnafluxed and also have the cylinder walls checked out before I start doing anything to it.

Sent from my LM-G710VM using Tapatalk
 

Alaska 79 K-10

Full Access Member
Joined
Apr 22, 2021
Posts
62
Reaction score
226
Location
Fairbanks Alaska
First Name
Bryan
Truck Year
1979
Truck Model
K-10
Engine Size
454
Should be a fun build. Oval port heads, dual plane intake, 9.5 compression, headers, and a healthy hydraulic flat tappet cam. Sexy and affordable. Would recommend ARP rod bolt when you get the connecting rods resized. Grrrr
 

shiftpro

Full Access Member
Joined
Aug 31, 2012
Posts
4,855
Reaction score
6,085
Location
BC Canada
First Name
shiftpro
Truck Year
73-87
Truck Model
1500, 2500, 3500
Engine Size
350, 383, 454, 496!
Groove the lifter bores.
 

Raider L

Full Access Member
Joined
Sep 1, 2020
Posts
1,892
Reaction score
994
Location
Shreveport, LA
First Name
William
Truck Year
1974
Truck Model
C10
Engine Size
355
A good acid dip will get all that rust off of it. What year block and heads are they? I like those motors.
I've read that GM called this engine a 396 for insurance purposes because an engine of 400 cubes was considered a big block and to much power or some such bs. What was the story?
 

Frankinmetz

Member
Joined
May 5, 2021
Posts
34
Reaction score
30
Location
Indiana
First Name
Nick
Truck Year
1981
Truck Model
1500
Engine Size
305
A good acid dip will get all that rust off of it. What year block and heads are they? I like those motors.
I've read that GM called this engine a 396 for insurance purposes because an engine of 400 cubes was considered a big block and to much power or some such bs. What was the story?
Yeah I saw a thing where people use muriatic acid to clean it up. The head's and the block are both from a 1970 passenger car so I'm assuming a Camaro or Nova maybe possibly a corvair?

Sent from my LM-G710VM using Tapatalk
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
28,956
Reaction score
23,466
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
A good acid dip will get all that rust off of it. What year block and heads are they? I like those motors.
I've read that GM called this engine a 396 for insurance purposes because an engine of 400 cubes was considered a big block and to much power or some such bs. What was the story?

Probably just marketing. Very late in '69, they started overboring the 396, which made it a 402. Then for the '70 model year, they called it a "400" in all models except for the "SS 396" versions of Camaro and Chevelle.

Why in the hell they called it a '400' instead of a 402 is probably anyone's guess. Especially since for '70, there was the small block '400' which actually was a 400. The original factory literature I have calls the small block a "regular fuel 400" and the big block is called a "premium fuel 400".
 

Turbo4whl

Supporting Member
Supporting Member
Joined
Oct 30, 2019
Posts
2,837
Reaction score
6,353
Location
Downingtown, PA
First Name
Wayne
Truck Year
1974
Truck Model
Jimmy
Engine Size
350
Yeah I saw a thing where people use muriatic acid to clean it up. The head's and the block are both from a 1970 passenger car so I'm assuming a Camaro or Nova maybe possibly a corvair?

Sent from my LM-G710VM using Tapatalk

The 402 would have been a passenger car. Mostly full size, like an Impala or Biscayne. You would need an extremely big shoehorn to stuff a 402 in a Corvair.
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
28,956
Reaction score
23,466
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
The 402 would have been a passenger car. Mostly full size, like an Impala or Biscayne. You would need an extremely big shoehorn to stuff a 402 in a Corvair.

'70-'72 trucks as well.


Big block Corvairs are out there, but I've not seen one yet that still had a back seat, lol.
 

Turbo4whl

Supporting Member
Supporting Member
Joined
Oct 30, 2019
Posts
2,837
Reaction score
6,353
Location
Downingtown, PA
First Name
Wayne
Truck Year
1974
Truck Model
Jimmy
Engine Size
350
'70-'72 trucks as well.


Big block Corvairs are out there, but I've not seen one yet that still had a back seat, lol.

That't why you need the big shoehorn!
 

Latest posts

Forum statistics

Threads
41,850
Posts
903,460
Members
33,362
Latest member
Dhatch84
Top