Gm 14 Bolt rebuild kit??

Preston Tucker · Apr 17, 2021

Hey all, Ive been poking around looking for a rebuild kit for my 1974s Gmc k2500 rear end. I need all bearings and seals. Whats the best bang for my buck? Do not need ring and in pinion gear.

Curt · Apr 17, 2021

I got my kit from summit racing.It was a kit by Motive Gear.I chose the one with Timken bearings.

Curt · Apr 17, 2021

You’ll have to get wheel seals and hub bearings and races separately.I honestly believe it’s easier to remove the axle assembly from the truck.I installed the new internals minus the hubs and axle shafts,then man handled it back under the truck.

i got a dial indicator,shop press and digital caliper from harbor freight for 130-140$.Now would be a good time to install a traction device (no spin).

You must be registered for see images attach

Bextreme04 · Apr 17, 2021

You must be registered for see images attach

I’m about to do this on my 1980 K25. I got a Yukon Grizzly locker and a rebuilt kit locally for $350 from a guy that bought everything to rehear an axle and then never did it. I also got all new brake pads, wheel bearings/races, brake hardware kits, and parking brake hardware from rock auto because if I’m already going to be in there I might as well do it all at once. It hasn’t been redone since AT LEAST 2006 (if ever), so I figured I might as well. You’ll need to look at your brake drums to figure out which size you have, mine were the 13” drums, so the part numbers may or may not be the same as your axle

Preston Tucker · May 21, 2021

Curt said:
You’ll have to get wheel seals and hub bearings and races separately.I honestly believe it’s easier to remove the axle assembly from the truck.I installed the new internals minus the hubs and axle shafts,then man handled it back under the truck.

i got a dial indicator,shop press and digital caliper from harbor freight for 130-140$.Now would be a good time to install a traction device (no spin).

You must be registered for see images attach

You must be registered for see images attach

Cool man, do you have a link?

Curt · May 21, 2021

Preston Tucker said:
Cool man, do you have a link?

https://www.summitracing.com/parts/mgr-r14rmkht/make/gmc/model/k25-k2500-pickup/year/1974

Gm 14 Bolt rebuild kit??

Preston Tucker

Full Access Member

Curt

Full Access Member

Curt

Full Access Member

Bextreme04

Full Access Member

Preston Tucker

Full Access Member

Curt

Full Access Member

Similar threads

Latest posts

Forum statistics