Where does this hose hook up to?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

SquareRoot

Full Access Member
Joined
Mar 18, 2017
Posts
3,694
Reaction score
6,674
Location
Arizona
First Name
Mike
Truck Year
85
Truck Model
K20
Engine Size
350
What wasn't working correctly after you drove it home from the shop? That will at least tell you where to look.
 

Jimmy84

Junior Member
Joined
Sep 27, 2020
Posts
15
Reaction score
5
Location
Brownsburg, IN
First Name
Jeffrey
Truck Year
1984
Truck Model
GMC k5
Engine Size
5.7l
It looks as if it's going through the firewall. If you had cruise control on that truck at one time, it could be the cruise control vacuum break that went to the brake pedal valve. Without having vacuum operated AC controls, the only other reason for a vacuum line that size to run inside your truck is for the cruise control vacuum break. On my 84 that hose goes through the driver side firewall to the lower right hand side of the master cylinder.
 

AuroraGirl

Full Access Member
Joined
Sep 8, 2019
Posts
9,202
Reaction score
6,167
Location
Northern Wisconsin
First Name
Taylor
Truck Year
1978, 1980
Truck Model
K10, K25
Engine Size
400(?), 350
It looks as if it's going through the firewall. If you had cruise control on that truck at one time, it could be the cruise control vacuum break that went to the brake pedal valve. Without having vacuum operated AC controls, the only other reason for a vacuum line that size to run inside your truck is for the cruise control vacuum break. On my 84 that hose goes through the driver side firewall to the lower right hand side of the master cylinder.
That’s why I’m thinking maybe a gauge
 

gmbellew

Full Access Member
Joined
May 27, 2018
Posts
1,043
Reaction score
1,021
Location
Kansas city
First Name
glen
Truck Year
1990
Truck Model
suburban 1500
Engine Size
350
even non-AC trucks use vacuum to switch from floor to defrost, right? or do they use a cable like the hot/cold door?
 

Raider L

Full Access Member
Joined
Sep 1, 2020
Posts
1,892
Reaction score
994
Location
Shreveport, LA
First Name
William
Truck Year
1974
Truck Model
C10
Engine Size
355
@akchevrolet,
Did this shop put a oxygen sensor in the headers? Or a bung for one? Since you don't have A/C this line could go to some vacuum source, and the engine wasn't running funky coming home? Non a/c vehicles had a cable pull for the heater and vent door. And wires could have been in this hose since it's going into the cab, to protect them from engine heat.
 

Raider L

Full Access Member
Joined
Sep 1, 2020
Posts
1,892
Reaction score
994
Location
Shreveport, LA
First Name
William
Truck Year
1974
Truck Model
C10
Engine Size
355
Call that shop and ask them, "What the heck did you do to my truck??!!" lol
 

akchevrolet

Full Access Member
Joined
Sep 22, 2016
Posts
463
Reaction score
559
Location
Texas
First Name
Andrew
Truck Year
1987
Truck Model
R10
Engine Size
305
Found the plug for the o2 sensor they didnt cut it. Didnt put a bung on the headers for the o2 sensor.
 

86 SCOTTSDALE

Full Access Member
Joined
Apr 10, 2019
Posts
360
Reaction score
278
Location
Oakham MA
First Name
Armand
Truck Year
1986
Truck Model
K10
Engine Size
305
even non-AC trucks use vacuum to switch from floor to defrost, right? or do they use a cable like the hot/cold door?
No, Non AC trucks used cables, Bothe my trucks are non AC and I have removed the air plenum from bothe my trucks to clean out mice nests.
 

Dave M

Banned
Joined
Jul 30, 2019
Posts
602
Reaction score
1,305
Location
Australia
First Name
Dave
Truck Year
1976
Truck Model
C10
Engine Size
454
Get your head/hand up under the dash and find where it goes to, simple.
 

Dave M

Banned
Joined
Jul 30, 2019
Posts
602
Reaction score
1,305
Location
Australia
First Name
Dave
Truck Year
1976
Truck Model
C10
Engine Size
454
I was asking for the outside not inside.
Sure, but if you know exactly where it runs to, we can possibly better advise you as to where to connect it back up..
It may be a redundant hose.
 

akchevrolet

Full Access Member
Joined
Sep 22, 2016
Posts
463
Reaction score
559
Location
Texas
First Name
Andrew
Truck Year
1987
Truck Model
R10
Engine Size
305
true true ill take a gander
 

Latest posts

Forum statistics

Threads
42,029
Posts
907,657
Members
33,521
Latest member
Laqota
Top