Steering column bearing help!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

FranticMeeping

Junior Member
Joined
Mar 10, 2021
Posts
17
Reaction score
26
Location
Minnesota
First Name
Paul
Truck Year
1985
Truck Model
K20
Engine Size
6.2 Diesel
Got my column torn down tonight, and I got a problem. The upper ball bearing is bad as the rollers are falling out. Rock Auto stocks the bearing for non-tilt columns, but I can’t find the one for a tilt column. Can anyone point me in the right direction? Thanks fellas!
 

Goldie Driver

Full Access Member
Joined
Mar 19, 2018
Posts
3,925
Reaction score
6,376
Location
Houston, Texas
First Name
Britt
Truck Year
1980
Truck Model
GMC K1500 Suburban
Engine Size
350
Got my column torn down tonight, and I got a problem. The upper ball bearing is bad as the rollers are falling out. Rock Auto stocks the bearing for non-tilt columns, but I can’t find the one for a tilt column. Can anyone point me in the right direction? Thanks fellas!

I believe the piece the balls ride in are plastic.

Is it broken ( the plastic) ?

If not, try greasing the balls - assuming you have them all - and try reassembly.

If not, try something like GM Parts Online.

Or, Amazon:

https://www.amazon.com/General-Moto...ocphy=9061128&hvtargid=pla-567816374582&psc=1
 

FranticMeeping

Junior Member
Joined
Mar 10, 2021
Posts
17
Reaction score
26
Location
Minnesota
First Name
Paul
Truck Year
1985
Truck Model
K20
Engine Size
6.2 Diesel
That’s the issue, I can only account for 3 rollers. I think the rest are buried with Jimmy Hoffa
 

Goldie Driver

Full Access Member
Joined
Mar 19, 2018
Posts
3,925
Reaction score
6,376
Location
Houston, Texas
First Name
Britt
Truck Year
1980
Truck Model
GMC K1500 Suburban
Engine Size
350
That’s the issue, I can only account for 3 rollers. I think the rest are buried with Jimmy Hoffa

Got one of those telescoping magnetic pickup tools?

You might get lucky.
 

rt66paul

Full Access Member
Joined
Apr 16, 2016
Posts
230
Reaction score
109
Location
California
First Name
paul
Truck Year
1991 suburban
Truck Model
2500
Engine Size
7.4
Where do you live? If you live in a big city or near an industrial center, I would take the bearing to a bearing supply company. It isn't like GM manufactures these bearings, they usually use something that was already made.
 

C10MixMaster

Full Access Member
Joined
Dec 6, 2016
Posts
756
Reaction score
1,420
Location
Kingman AZ
First Name
Ben
Truck Year
1977
Truck Model
C10 BIG10
Engine Size
ZZ4 350

Raider L

Full Access Member
Joined
Sep 1, 2020
Posts
1,892
Reaction score
994
Location
Shreveport, LA
First Name
William
Truck Year
1974
Truck Model
C10
Engine Size
355
@ To All!

You can get those bearing sets on Ebay. @FranticMeeping Yeah, the bearing cages are plastic and the balls fit in with grease. Do you have any of those balls loose? Put a micrometer on one and then you'll know what you are looking for. @Goldie Driver has the right idea, just go to most any industrial supply place and they ought to have that size ball bearing for you, if not they can get them. Just count the places for each ball in that plastic cage and that's how many you need. Now be careful because there is another one of the same type bearing cage in the back of the rear bearing support to so be aware. And the "rollers" are "ball bearings".
 
Last edited:

Raider L

Full Access Member
Joined
Sep 1, 2020
Posts
1,892
Reaction score
994
Location
Shreveport, LA
First Name
William
Truck Year
1974
Truck Model
C10
Engine Size
355
@Goldie Driver, I just put that one I had back in my column. I hunted, and hunted for a shift gate but could never find on anywhere. I mean I went on safari looking, and nothing. All the one's anyone see's are for a standard column, not a tilt. Even the column place I bought parts from didn't have any and didn't know where to get one. So, screw it. It'll have to work. Did you see how much that place you posted wanted for a bag of ball bearings? A hundred damn dollars! Holy smoke! And was asking a hundred dollars for the turn signal plates to?! Dang! What these guys do is, they go around to all kinds of wrecking yards and buy up columns then sell the parts for a million dollars.
 

PrairieDrifter

Full Access Member
Joined
Dec 28, 2014
Posts
3,422
Reaction score
4,482
Location
North Dakota
First Name
Mason
Truck Year
84,79,77,70,48
Truck Model
Suburban k10, bonanza k10, c30 C&C, c10, gmc 1/2ton
Engine Size
350, 350, 350, 350, 350
@Goldie Driver, I just put that one I had back in my column. I hunted, and hunted for a shift gate but could never find on anywhere. I mean I went on safari looking, and nothing. All the one's anyone see's are for a standard column, not a tilt. Even the column place I bought parts from didn't have any and didn't know where to get one. So, screw it. It'll have to work. Did you see how much that place you posted wanted for a bag of ball bearings? A hundred damn dollars! Holy smoke! And was asking a hundred dollars for the turn signal plates to?! Dang! What these guys do is, they go around to all kinds of wrecking yards and buy up columns then sell the parts for a million dollars.
Also hard to find because a lot of people do manual swaps on autos, end up having to keep the auto steering column, because they can't find a manual column because of the same situation you mentioned. Or they don't want to go through the work of swapping/finding another column.

Let's also not forget that a lot of people just take these usually perfectly good trucks to scrapyards...
 

wanderinthru

Full Access Member
Joined
Jul 23, 2020
Posts
1,170
Reaction score
2,046
Location
Mid Point Route 66
First Name
Shakey
Truck Year
81, 70, 75, 84, 89
Truck Model
K 10, C 30, K 20
Engine Size
350
Anybody figure out if the OD of inner and outer? Or, are they the same? Inner aint hard to measure but the outer would be a trick.
 

Latest posts

Forum statistics

Threads
41,857
Posts
903,628
Members
33,370
Latest member
mitchell1128
Top