What have you done to your square lately??

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

80BrownK10

Full Access Member
Joined
Oct 22, 2019
Posts
1,878
Reaction score
1,240
Location
Greenwood, SC
First Name
Nate
Truck Year
1980
Truck Model
K10
Engine Size
350
not on the square, but the wifes 2019 Equinox. We got it in 08/19. Well she hasn't driven it much....damn thing has only 5,400 miles on it. She's not making the 3 hour trips to TN anymore.

Anyway, the damn change oil warning came on about 1,500 miles ago. I said no friggin' way I'm changing the oil. So here we were at 5,300 and she said, you should prolly change the oil in it. It's synthetic.....should be good for 7,500!!

But ya'll know the drill, yes I changed the damn oil on a vehicle that only has 5,400 miles on it lol. Was going to put Amazon basics into it like I do the truck, but Mobil 1 was the same price so I went mobil.
My work f150 is a 2020 with the 5.0 in it. I just had my 3rd oil change and it has 24k or so on the odometer. I know this last oil change I probably went over 1k from the light and I think the last one I went maybe 1 to 2k easy over the light to change oil. I do idle a lot though.

That truck uses oil as well. When oil change time comes around it's on the bottom of the stick.
 

82sbshortbed

Fuckemall!!
Joined
Mar 1, 2018
Posts
14,808
Reaction score
49,044
Location
SE Texas
First Name
Doug
Truck Year
1982, 1984
Truck Model
1500 shortbed, 1500 longbed
Engine Size
454, 305
Last edited:

80BrownK10

Full Access Member
Joined
Oct 22, 2019
Posts
1,878
Reaction score
1,240
Location
Greenwood, SC
First Name
Nate
Truck Year
1980
Truck Model
K10
Engine Size
350

RecklessWOT

Full Access Member
Joined
Feb 20, 2015
Posts
2,548
Reaction score
4,744
Location
New Hampshire
First Name
Kevin
Truck Year
1987
Truck Model
V10 Suburban Silverado
Engine Size
350 TBI
Dang yours took forever....are you still on the paper check route? I think I got mine like a week after it was signed into law.
Seriously. I think I got mine like the 3rd day after people were eligible to start getting them.

I feel like a ***** because I really don't need "emergency relief funds", was paying my bills just fine without putting the country further in debt, but **** it if they're already gonna rape the value of the US dollar and everyone else is getting it too, might as well take my share and spend that dirty money. Went out and bought a badass dirtbike, stimulus before that went went towards a new hunting rifle and some ammunition, pretty sure the one before that just went towards booze and gasoline. My wife had a little money to blow on her stupid **** too.

I feel like the people who really and truly are hurting financially from the pandemic (basically restaurant workers and landlords, I feel like everyone else still has a job) should be able to get the help they need, but prove the need and apply for it like every other gov't assistance program out there. This is ********, "hey there's some disease going around, more free money for everyone!" like who the ****'s bright idea is that ****?
 

C10MixMaster

Full Access Member
Joined
Dec 6, 2016
Posts
756
Reaction score
1,420
Location
Kingman AZ
First Name
Ben
Truck Year
1977
Truck Model
C10 BIG10
Engine Size
ZZ4 350
You must be registered for see images attach



Nice! I'm ordering this one for mine tomorrow after I deposit uncle Joe's check I got finally yesterday. Lol

https://www.amazon.com/dp/B01MRU3250/ref=cm_sw_r_cp_apa_glt_fabc_06907MDJY475PHCZGBGV


That's who I got mine from but went strait to the company cut fleabay / amazon out of there cut. and I added the crush sleeve eliminator to for an extra 15$ https://www.quickperformance.com/ and that was my stimulus splurge to.
 

82sbshortbed

Fuckemall!!
Joined
Mar 1, 2018
Posts
14,808
Reaction score
49,044
Location
SE Texas
First Name
Doug
Truck Year
1982, 1984
Truck Model
1500 shortbed, 1500 longbed
Engine Size
454, 305
Dang yours took forever....are you still on the paper check route? I think I got mine like a week after it was signed into law.

It was my fault it's so late. Yeah it was a paper check. I didn't file my 18 19 taxes so I didn't get the first two until I filed my 20 taxes. They added the extra 1800 when I did to my return. Then they mailed me the 1400 yesterday. About two weeks after I got my refund.

Don't know why they mailed it because they have my account that they e deposit my return. I'm a huge procrastinating mf and it's stupid. Lol
 

80BrownK10

Full Access Member
Joined
Oct 22, 2019
Posts
1,878
Reaction score
1,240
Location
Greenwood, SC
First Name
Nate
Truck Year
1980
Truck Model
K10
Engine Size
350
Seriously. I think I got mine like the 3rd day after people were eligible to start getting them.

I feel like a ***** because I really don't need "emergency relief funds", was paying my bills just fine without putting the country further in debt, but **** it if they're already gonna rape the value of the US dollar and everyone else is getting it too, might as well take my share and spend that dirty money. Went out and bought a badass dirtbike, stimulus before that went went towards a new hunting rifle and some ammunition, pretty sure the one before that just went towards booze and gasoline. My wife had a little money to blow on her stupid **** too.

I feel like the people who really and truly are hurting financially from the pandemic (basically restaurant workers and landlords, I feel like everyone else still has a job) should be able to get the help they need, but prove the need and apply for it like every other gov't assistance program out there. This is ********, "hey there's some disease going around, more free money for everyone!" like who the ****'s bright idea is that ****?
.maybe mine was the third day? I don't know. My last name starts with a V if they do alphabetical? Or was it related to the state your in or the bank you use...I can't remember at this point but it was fast. Same here with paying bills. I still had a job, didn't miss a day for anything. Just out my money in the bank and spending as normal.
 

80BrownK10

Full Access Member
Joined
Oct 22, 2019
Posts
1,878
Reaction score
1,240
Location
Greenwood, SC
First Name
Nate
Truck Year
1980
Truck Model
K10
Engine Size
350
It was my fault it's so late. Yeah it was a paper check. I didn't file my 18 19 taxes so I didn't get the first two until I filed my 20 taxes. They added the extra 1800 when I did to my return. Then they mailed me the 1400 yesterday. About two weeks after I got my refund.

Don't know why they mailed it because they have my account that they e deposit my return. I'm a huge procrastinating mf and it's stupid. Lol
So now do you need to file your 18 and 19 taxeso_O:confused:
 

OldBlueDually

Full Access Member
Joined
Jun 8, 2020
Posts
2,397
Reaction score
8,385
Location
Minnesota
First Name
Justin
Truck Year
1976 GMC
Truck Model
C30
Engine Size
455 Olds
Rebuilt the carb and put in new carb base/adapter gaskets, doing minor bodywork on air cleaner (came with minor dent and bad paint blemishes, will also paint blue), installed harmonic balancer and now working on and painting pulleys.

You must be registered for see images attach
 

Powerhouse Ranch

3G Connoisseur
Joined
Jan 6, 2021
Posts
1,459
Reaction score
2,560
Location
PA
First Name
Luke
Truck Year
1980 & 1988
Truck Model
C25 & V15
Engine Size
454 & 350
Got new door panels, Jimmy fender emblems, GMC tailgate emblem and Sierra Classic dash emblem for the birthday tomorrow. Would make it even better if the blast shop tells me my doors and tailgate blasted good and didn't warp. We shall see. More photos of these and my completed hubs soon
 

Shorty81

Baby Boomer
Joined
Mar 19, 2018
Posts
2,869
Reaction score
5,107
Location
North West ohio
First Name
Darren
Truck Year
86
Truck Model
K20
Engine Size
496
UGH....finally removed my steering arm. I built this truck from the parts bin and the previous owner of the chassis installed a lifted steering arm. My drag link was at a extreme angle. Trying to find one for a stock height truck is a bitch. Every one offered is for lifted/lowered. The PO reused the conical washers, and was a bad idea. They came out hard. Found a local with one to trade, and another 100 miles South of here. WTH, am I the only guy that leaves his truck height stock? LOL
You must be registered for see images attach
You must be registered for see images attach


You must be registered for see images attach
 
Last edited:

Latest posts

Forum statistics

Threads
42,056
Posts
908,170
Members
33,538
Latest member
Chuchito
Top