What have you done to your square lately??

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

CoggedBelt75

Full Access Member
Joined
Jul 31, 2010
Posts
35,029
Reaction score
144,843
Location
Altus, Oklahoma
First Name
Joe
Truck Year
1975
Truck Model
C10
Engine Size
383
I got up bug free so started cleaning under the hood. Nevr-dulled the shiny stuff and ArmorAll wiped the hoses & outside of drive belt. The wax job under the hood is still holding up so just damp wiped it. Started getting so darn muggy that I was spending more time wiping all the sweat up. Will wrap it up once it cools down.

You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach
 

CoggedBelt75

Full Access Member
Joined
Jul 31, 2010
Posts
35,029
Reaction score
144,843
Location
Altus, Oklahoma
First Name
Joe
Truck Year
1975
Truck Model
C10
Engine Size
383
While still sweaty I pulled the front shocks. Yo Reilly’s will have them for me around 4pm they say.
You must be registered for see images attach


Going back with Monroe. Bell Tech would hold up to the extra weight I’m carrying.
 

Powerhouse Ranch

3G Connoisseur
Joined
Jan 6, 2021
Posts
1,453
Reaction score
2,516
Location
PA
First Name
Luke
Truck Year
1980 & 1988
Truck Model
C25 & V15
Engine Size
454 & 350
Which parts in the picture are you looking for? You have an auto-locking hub pictured there, like what was optional in the 80's. Parts for them are not available.

May be hard to see, sorry, but the bottom one idk what the technical name is but it's a small ring with ball bearings on it and the top on is a thickish dust ring hiding behind the spindle. Both are split and i assume the other side will be also
 

Powerhouse Ranch

3G Connoisseur
Joined
Jan 6, 2021
Posts
1,453
Reaction score
2,516
Location
PA
First Name
Luke
Truck Year
1980 & 1988
Truck Model
C25 & V15
Engine Size
454 & 350
There is a place in San Diego that use to have all kinds of hard to find parts for 4x4s. Check our Border Auto Parts...They are in Spring Valley, Ca. If they don't have the parts they can probably tell you where to get them.

thank you!
 

78C10BigTen

Full Access Member
Joined
Apr 12, 2017
Posts
15,475
Reaction score
23,680
Location
pennsylvannia
First Name
Ted
Truck Year
1978
Truck Model
C10 BIG TEN
Engine Size
350
I got up bug free so started cleaning under the hood. Nevr-dulled the shiny stuff and ArmorAll wiped the hoses & outside of drive belt. The wax job under the hood is still holding up so just damp wiped it. Started getting so darn muggy that I was spending more time wiping all the sweat up. Will wrap it up once it cools down.

You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach
Shes a looker!!! :anitoof::naughty::naughty:
 

CoggedBelt75

Full Access Member
Joined
Jul 31, 2010
Posts
35,029
Reaction score
144,843
Location
Altus, Oklahoma
First Name
Joe
Truck Year
1975
Truck Model
C10
Engine Size
383
Picked up the shocks. Pulled one out of the box to look at for motivation. But it’s hotter now than it was earlier and with the light rain, it’s like a sauna in the garage. Will open the other one early in the AM and look at both of them for twice the motivation.

You must be registered for see images attach
 

Powerhouse Ranch

3G Connoisseur
Joined
Jan 6, 2021
Posts
1,453
Reaction score
2,516
Location
PA
First Name
Luke
Truck Year
1980 & 1988
Truck Model
C25 & V15
Engine Size
454 & 350
Picked up the shocks. Pulled one out of the box to look at for motivation. But it’s hotter now than it was earlier and with the light rain, it’s like a sauna in the garage. Will open the other one early in the AM and look at both of them for twice the motivation.

You must be registered for see images attach

atta boy! yellow monroes were going to be my route for the resto, but i think i'm gonna end up with stainless Bilsteins with a black boot, i feel its a more 4x4 thing. 2wd, Monroes all the way brother
 

Charlie

Mopar by Birth. Chevy by Choice.
Joined
Aug 2, 2017
Posts
1,837
Reaction score
909
Location
Euless, Texas
First Name
Don
Truck Year
1974
Truck Model
Cheyenne 10 LWB
Engine Size
350/TH350/AC/4 BBL Quadrajet
Picked up the shocks. Pulled one out of the box to look at for motivation. But it’s hotter now than it was earlier and with the light rain, it’s like a sauna in the garage. Will open the other one early in the AM and look at both of them for twice the motivation.

You must be registered for see images attach

What is their part number for those?

I have the part number 34824 that were replaced by the PO. Thinking about maybe replacing them. They were replaced about 6 or 7 years ago. Not very happy with them.
 
Last edited:

hoagster

Full Access Member
Joined
May 16, 2017
Posts
1,285
Reaction score
3,184
Location
California
First Name
Mike
Truck Year
1973, 2000
Truck Model
K10, 1500
Engine Size
5.3l
Sealed all the spots I could find that need it. Next up primer and a lot of sanding!

You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach
 

CoggedBelt75

Full Access Member
Joined
Jul 31, 2010
Posts
35,029
Reaction score
144,843
Location
Altus, Oklahoma
First Name
Joe
Truck Year
1975
Truck Model
C10
Engine Size
383
What is their part number for those?

I have the part number 34824 that were replaced by the PO. Thinking about maybe replacing them. They were replaced about 6 or 7 years ago. Not very happy with them.
34817 from Yo Reilly’s @$44.09 each.
 

hoagster

Full Access Member
Joined
May 16, 2017
Posts
1,285
Reaction score
3,184
Location
California
First Name
Mike
Truck Year
1973, 2000
Truck Model
K10, 1500
Engine Size
5.3l
As mentioned above, i'm currently do my front hubs on the Jimmy, (4 wheel all wheel drive) and little things like a small ring and the dust rings need replaced. Can't find them ANYWHERE! Anybody know where i can get some more specific pieces?

You must be registered for see images attach
You must be registered for see images attach

Have you figured out what front axle you have? There are some clues on the pumpkin and axle. I got parts from several different sites one being, https://www.dennysdriveshaft.com/
There are a host of others but you need to identify exactly what you have. I got my spindles off of Amazon and saved a $100 each, only because I knew what I needed! You can look at my build thread The pic's below are from June 2019. I had to waiting a long time for an OEM axle from Dana

You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach
 

CoggedBelt75

Full Access Member
Joined
Jul 31, 2010
Posts
35,029
Reaction score
144,843
Location
Altus, Oklahoma
First Name
Joe
Truck Year
1975
Truck Model
C10
Engine Size
383
It’s one muggy day with the showers around. Got the shocks mounted. No pics. Started the cleaning.
You must be registered for see images attach


I got more than I thought. Didn’t have to use the 1st bottle so that saved me some time. Everything has the final wax except for the roof and tail gate. Still need the wheels and tires done. Even tho the sun is kinda shining, it’s still spitting rain so just took a pic in the garage.
You must be registered for see images attach


You must be registered for see images attach


Tomorrow is another day.
 

78C10BigTen

Full Access Member
Joined
Apr 12, 2017
Posts
15,475
Reaction score
23,680
Location
pennsylvannia
First Name
Ted
Truck Year
1978
Truck Model
C10 BIG TEN
Engine Size
350
It’s one muggy day with the showers around. Got the shocks mounted. No pics. Started the cleaning.
You must be registered for see images attach


I got more than I thought. Didn’t have to use the 1st bottle so that saved me some time. Everything has the final wax except for the roof and tail gate. Still need the wheels and tires done. Even tho the sun is kinda shining, it’s still spitting rain so just took a pic in the garage.
You must be registered for see images attach


You must be registered for see images attach


Tomorrow is another day.
Seriously joe i still drool every time i see it!
 

Latest posts

Forum statistics

Threads
41,848
Posts
903,425
Members
33,362
Latest member
Dhatch84
Top