Full SM465 swap Value?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

LsSquareBody

Junior Member
Joined
Sep 22, 2020
Posts
7
Reaction score
22
Location
Georgia
First Name
Lance
Truck Year
1987
Truck Model
V10
Engine Size
6.0
Hey everyone, new to the group and first time post. I have an 87 V10 short box, I did a Vortec 6.0 LQ4 swap and backed it with the SM465 that was in the truck with the previous engine. This was a fun project and I had to do some research to find parts and do a little fabrication to make this combo work but once I got it all together I didn’t really care for the low geared transmission behind an engine that wants to go..... now I am going to build the 4l80e that I pulled with the engine. My question is how do I price the SM465 and how much? List of parts are as follows:

* SACHS 1050 flywheel (used to mate to the LS engine and use an older 10 spline clutch)
*ARP flywheel and pressure plate bolts
* Hays Super Truck Clutch 12” (New)
*LS7 pilot shaft bearing
* New clutch fork
* New Throwout bearing
*79-91 SM 465 32 spline with an aluminum bell housing.
* Advanced Adapters slave cylinder bracket pt#715535
* New slave cylinder, hydraulic line, master cylinder and reservoir.
* Hydraulic clutch pedal assembly (Bowler Transmission’s hydraulic clutch pedal assembly kit)
* I also have a complete manual clutch linkage kit that includes:
* Steel Bell housing, Old style clutch fork, z bar, bell crank, clutch rod, and what is a fair price for all of this? I appreciate your advice in advance.
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
28,956
Reaction score
23,465
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
Sounds like a lot of nice parts, but it depends. Is the slave bracket to make an older bellhousing work as a hydro? If so, the bellhousing itself has little value. Same thing with the pedal assembly. Is it factory hydro pedals or conversion pedals?

It also depends on how much you are willing to split stuff up. If you are trying to sell it complete, it may be a hard sale. But if you are willing to sell the trans separately, all the clutch and pedal stuff should sell fast. The 465 trans itself, it may take a bit to find a buyer.
 

Green79Scottsdale

Full Access Member
Joined
Aug 8, 2010
Posts
2,834
Reaction score
7,483
Location
G.R. - MI
First Name
Bob
Truck Year
1979
Truck Model
K20
Engine Size
400
I will give ya $100 for everything... :deal: :driver:
 

Latest posts

Forum statistics

Threads
41,847
Posts
903,383
Members
33,362
Latest member
Dhatch84
Top