What have you done to your square lately??

78C10BigTen · Oct 18, 2020

Vbb199 said:
I was thinking that actually
"Wonder how long this will stay functional on the hood"

You have fab skills... make a "housing" for it like the old school gto judge.

TotalyHucked · Oct 20, 2020

Buttoned up a bunch of last minute odds and ends last night. Made trans lines, installed the aux battery tray, figured out the grounds from the battery, header gaskets/o2s/plugs/wires installed. Tuner comes tonight, hopefully she’ll fire with no issues [emoji1696][emoji1696]

You must be registered for see images attach

Sent from my iPhone using Tapatalk Pro

anic6598 · Oct 20, 2020

Got front springs and shocks installed

You must be registered for see images attach

Sent from my iPhone using Tapatalk

Goldie Driver · Oct 21, 2020

Waiting for a neighbor to come back so I can get towed home - she just died on me. I smell fuel, but no start - I am gonna assume ignition module. Can they be tested ?

Goldie Driver · Oct 21, 2020

Home - got my Armstrong steering workout for the day, too.

:anitoof:

Cost me 3/4 of a case of beer. Cheap !

Snoots · Oct 21, 2020

Started with this (SP2P):

You must be registered for see images attach

Now this:

You must be registered for see images attach

Got the bugger out!
Now ready for the upgrade:

You must be registered for see images attach

Touch of primer:

You must be registered for see images attach

And a touch of paint:

You must be registered for see images attach

Snoots · Oct 21, 2020

Some old solid but rusty and banged up headers ($25), a little banging, bead blasting inside and out and, Eastwoods 1800 degree ceramic paint (inside and out):

You must be registered for see images attach

500 miles on 'em and they still look great!

You must be registered for see images attach

Snoots · Oct 21, 2020

Finally! With a Q-Jet that has one of Cliff's kits in it and an Accel HEI distributor!

You must be registered for see images attach

Charlie · Oct 21, 2020

Goldie Driver said:
Waiting for a neighbor to come back so I can get towed home - she just died on me. I smell fuel, but no start - I am gonna assume ignition module. Can they be tested ?

I have had them tested at Oreilly's before.

Goldie Driver · Oct 21, 2020

Charlie said:
I have had them tested at Oreilly's before.

I may try that tomorrow. Got the new one in- fired right up. Oops, mild miss - vaccuum hose got disconnected.

Got it back on - no start.

****. Now sitting in the back of the driveway blocking all the vehicles.

If she starts tomorrow, I can move the vehicles. If not, she has to be pushed out of the way and be in the street.

****.

Wonder if there is an intermittent issue, or if something fried the new module, too.

Paladin · Oct 21, 2020

Snoots said:
Finally! With a Q-Jet that has one of Cliff's kits in it and an Accel HEI distributor!

You must be registered for see images attach

Damn, that breather sure did clean up nice! Good work!! :cheers:

Doppleganger · Oct 22, 2020

Didn't mean to do this today but said WTF and went for it. Hood, fenders and cab all come off tomorrow.....and that half assed cobbled trailer hitch is getting the sawz-all / grinder treatment. Figured a way to store the bed, cab and other car in that closet of a garage, and still have room to set up a table to sort spares I'm unloading. Got a pile of parts at the powder coater and both axles at another shop. Even my shed is packed.

A truck takes up 1 space. A dismantled truck takes up 5 spaces.

You must be registered for see images attach

82sbshortbed · Oct 22, 2020

OldBlueDually said:
Here are a few more.

Here is the original guard....I did not have the other one. So I made one from some scrap steel I had sitting around...

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

@78C10BigTen has had one in the back of his truck for like 2 years now. Might cut you a deal on it. Lol

82sbshortbed · Oct 22, 2020

TotalyHucked said:
Got about 70% of the wiring done tonight. Been putting this off forever and dreading it. Really wasn’t bad, I just had to stop looking at the whole picture and just focus on one circuit at a time

You must be registered for see images attach

Sent from my iPhone using Tapatalk Pro

I gotta lot of wiring to clean up in mine too. I hate doing it too. But. This helps me want to a little more now. Lol

82sbshortbed · Oct 22, 2020

Vbb199 said:
I couldnt find a suitable location anywhere else and i wasnt alright with a column tach.....

Too...... old manish

So I see you went with dumb millennial spot. Good for you. Lol

What have you done to your square lately??

78C10BigTen

Full Access Member

TotalyHucked

Full Access Member

anic6598

Junior Member

Goldie Driver

Full Access Member

Goldie Driver

Full Access Member

Snoots

Full Access Member

Snoots

Full Access Member

Snoots

Full Access Member

Charlie

Mopar by Birth. Chevy by Choice.

Goldie Driver

Full Access Member

Paladin

"Teufelshunde"

Doppleganger

Full Access Member

82sbshortbed

Fuckemall!!

82sbshortbed

Fuckemall!!

82sbshortbed

Fuckemall!!

Similar threads

Latest posts

Forum statistics