Best way to install new hood hinge springs?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

MisterB

Full Access Member
Joined
Sep 9, 2019
Posts
676
Reaction score
845
Location
Northwest
First Name
AJ
Truck Year
1980
Truck Model
GMC K2500 4X4
Engine Size
350
I bought all new hinges and springs for my '80 from LMC. I also bought their tool, which is essentially a T handle with a hook on the end. I got the hinges on just fine, but I can't get the new springs on. Had to end up just putting the old springs on.

I'm strong enough to pull them in to position, but there isn't enough space between the last coil and the hook on the spring to clear the slot on the hinge for it to slip on to.

I tried a beefy screwdriver as well, but I just can't quite get the damn things to go on. Ideas?
You must be registered for see images attach


Sent from my SM-N975U1 using Tapatalk
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
28,961
Reaction score
23,479
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
Clamp the end of the spring in a vice. While bending the spring back and forth, insert shims (like fender shims) in between the coils when they open up. Just do that until the spring is long enough to slip into place. Once in place on the hinges, just push the hood closed... the shims will all fall out of place as the spring stretches further.
 

MisterB

Full Access Member
Joined
Sep 9, 2019
Posts
676
Reaction score
845
Location
Northwest
First Name
AJ
Truck Year
1980
Truck Model
GMC K2500 4X4
Engine Size
350
Clamp the end of the spring in a vice. While bending the spring back and forth, insert shims (like fender shims) in between the coils when they open up. Just do that until the spring is long enough to slip into place. Once in place on the hinges, just push the hood closed... the shims will all fall out of place as the spring stretches further.
I'll have to try that. I just found this other option. Maybe I was coming from the wrong angle. I was coming up over the top. This guy came in from the side

xc_hide_links_from_guests_guests_error_hide_media

Sent from my SM-N975U1 using Tapatalk
 

C10MixMaster

Full Access Member
Joined
Dec 6, 2016
Posts
756
Reaction score
1,420
Location
Kingman AZ
First Name
Ben
Truck Year
1977
Truck Model
C10 BIG10
Engine Size
ZZ4 350
i just use a big pair of vise grips
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
28,961
Reaction score
23,479
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
I'll have to try that. I just found this other option. Maybe I was coming from the wrong angle. I was coming up over the top. This guy came in from the side

xc_hide_links_from_guests_guests_error_hide_media

Sent from my SM-N975U1 using Tapatalk

I'll have to try Lucky's way next time, that looked really easy.
 

Big Chip

Full Access Member
Joined
Oct 19, 2017
Posts
4,656
Reaction score
6,728
Location
Michigan
First Name
Kevin
Truck Year
1979
Truck Model
C35
Engine Size
454
I hooked a chain to the spring and just pulled on it. It takes surprisingly little effort.
 

MisterB

Full Access Member
Joined
Sep 9, 2019
Posts
676
Reaction score
845
Location
Northwest
First Name
AJ
Truck Year
1980
Truck Model
GMC K2500 4X4
Engine Size
350
I hooked a chain to the spring and just pulled on it. It takes surprisingly little effort.
Were your springs brand new? The brand new ones are pretty damn stiff. The old ones aren't so bad

Sent from my SM-N975U1 using Tapatalk
 

Big Chip

Full Access Member
Joined
Oct 19, 2017
Posts
4,656
Reaction score
6,728
Location
Michigan
First Name
Kevin
Truck Year
1979
Truck Model
C35
Engine Size
454
Were your springs brand new? The brand new ones are pretty damn stiff. The old ones aren't so bad

Sent from my SM-N975U1 using Tapatalk
I did it with new ones and then with the old ones. It's the same concept as the v-belt but you can use more body weight to pull. If the chain is too thick you'll have trouble getting it hooked and getting the chain off.

xc_hide_links_from_guests_guests_error_hide_media
 

gotyourgoat

Full Access Member
Joined
Mar 27, 2014
Posts
2,117
Reaction score
3,417
Location
NRV Virginia
First Name
gotyourgoat
Truck Year
1984
Truck Model
c10
Engine Size
smokin' 305
I'll have to try that. I just found this other option. Maybe I was coming from the wrong angle. I was coming up over the top. This guy came in from the side

xc_hide_links_from_guests_guests_error_hide_media

Sent from my SM-N975U1 using Tapatalk
Bunch of chevys in the background of that helpfull video. :cheers:
 

Raybo135

Full Access Member
Joined
Jan 20, 2019
Posts
294
Reaction score
310
Location
Arvada, Colorado
First Name
Raymond
Truck Year
1976
Truck Model
K10 Silverado
Engine Size
400
Clamp the end of the spring in a vice. While bending the spring back and forth, insert shims (like fender shims) in between the coils when they open up. Just do that until the spring is long enough to slip into place. Once in place on the hinges, just push the hood closed... the shims will all fall out of place as the spring stretches further.
I was gong to tell him the same thing. Or He could use 1.5 inch washers and insert them and when the spring is lone enough, put it on and close the hood and they will all fall on the floor.
 

ali_c20

Full Access Member
Joined
Sep 20, 2016
Posts
1,003
Reaction score
1,332
Location
Austria
First Name
Alexander
Truck Year
1974, 1979
Truck Model
C20, K5
Engine Size
350, 350
I use a old seat belt to change or install the hood hinge springs. You have good grip and can pull with both hands and your whole body weight. You don't scratch any paint with the belt canvas. Always worked for me.
You must be registered for see images
 

chiefburns

Junior Member
Joined
Jul 17, 2020
Posts
25
Reaction score
65
Location
charleston, sc
First Name
Malcolm
Truck Year
1976
Truck Model
C15
Engine Size
6cyl
I watched a video on YouTube where the guy screwed deck screws in between each spring loop, on opposite sides of each other, and it extended the spring enough to remove it. He did the same for the new spring and just backed the screws out to seat it back on the hinge.
 

MisterB

Full Access Member
Joined
Sep 9, 2019
Posts
676
Reaction score
845
Location
Northwest
First Name
AJ
Truck Year
1980
Truck Model
GMC K2500 4X4
Engine Size
350
I watched a video on YouTube where the guy screwed deck screws in between each spring loop, on opposite sides of each other, and it extended the spring enough to remove it. He did the same for the new spring and just backed the screws out to seat it back on the hinge.
Holy ****, that sounds suicidal lol

Sent from my SM-N975U1 using Tapatalk
 

MisterB

Full Access Member
Joined
Sep 9, 2019
Posts
676
Reaction score
845
Location
Northwest
First Name
AJ
Truck Year
1980
Truck Model
GMC K2500 4X4
Engine Size
350
So I got it all done. I bought new springs from a different vendor (Classic Industries). Tried the seat belt trick, but couldn't get it to go on the right side. Ended up using the LMC hook tool, and coming in from the side. It just barely snapped on and then I was able to pull it over.

The left side was harder to do. As you know, that one has the hook facing up instead of down. I could not get it to go on. Ended up getting a thick screw driver on the end and leveraged it up there and got it to go on. Wore gloves and safety glasses, because this could all go badly, especially on brand new tight springs and hinges.

Sent from my SM-N975U1 using Tapatalk
 

Latest posts

Forum statistics

Threads
41,856
Posts
903,621
Members
33,370
Latest member
mitchell1128
Top