Manual to auto swap.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

hunters628

Full Access Member
Joined
Sep 10, 2019
Posts
237
Reaction score
203
Location
Ellensburg Washington
First Name
Hunter
Truck Year
1982
Truck Model
K10
Engine Size
305
Got a couple questions. I’m wanting to change over my k10 from a sm465 to an auto of some sort. I’m just about to drop a 5.3 in the truck. Truck will be my daily and 80% freeway use. I have a slide in camper that I will also have in the truck sometimes. I’m not big into wheeling but do hunt and will drive through the woods and beat up roads to camp and stuff. I have 3.08 front and rear with 31” tires. I would like to stick with a th350, th400, or 700r4. Looking for recommendations on this. I’ve already had the tranny controls deleted from my ecm so I don’t want to run a 4l60e. If anyone has something they’re willing to trade for my low mileage 465/208 or make a deal on let me know. All input is welcome! Thanks
 

nvrenuf

Full Access Member
Joined
Jul 30, 2010
Posts
1,689
Reaction score
1,879
Location
Mobile, Al.
First Name
John
Truck Year
1991
Truck Model
K5
Engine Size
454
With your use I’d go for an overdrive. A well built 700 should do fine for you.
 

SquareRoot

Full Access Member
Joined
Mar 18, 2017
Posts
3,659
Reaction score
6,602
Location
Arizona
First Name
Mike
Truck Year
85
Truck Model
K20
Engine Size
350
Why would you want an overdrive with 3:08 gears?
 

Frankenchevy

Proverbs 16:18
Joined
Jan 3, 2018
Posts
5,905
Reaction score
7,252
Location
USA
First Name
Jeremy
Truck Year
Square
Truck Model
CUCV
Engine Size
Small
Pros and cons to all of them. Regear axles to utilize an OD auto. 400 is strong but more hp losses. 350 is a decent tranny if you don’t want to regear with less hp lost, but not as stout as a 400...
 

hunters628

Full Access Member
Joined
Sep 10, 2019
Posts
237
Reaction score
203
Location
Ellensburg Washington
First Name
Hunter
Truck Year
1982
Truck Model
K10
Engine Size
305
700r4 would have me at approx 1800 rpm with 3.08s and 31s doing 75mph. Th400/th350 would be 2500 with the same setup at 75. Not sure which would be better. Unloaded I would probably be in OD a bit. But with the camper I would be 3rd, which is the same as the th trannys. I’ve been wanting to get a 6 lug 14bsf with 3.73s and regear the front to match. 3.73s with a 700 would be 2100 in od at 75mph. That sounds like the sweet spot to me. What year range 700 is desirable. Was it offered with a np205 or will it be easier/cheaper to get a 208 setup. The non electronic 4l60 any better than a 700 or is it the same thing. Any easier to get? Sorry for so many questions. Thanks
 

Matt69olds

Full Access Member
Joined
Jan 8, 2018
Posts
2,338
Reaction score
3,571
Location
Central Indiana
First Name
Matt
Truck Year
81
Truck Model
GMC 1/2 ton
Engine Size
455 Olds
What engine controller do you plan to use with the 5.3? Is it capable of controlling a 4L60E? If so, that would be the way to go.
 

mcarlo86

Full Access Member
Joined
May 17, 2019
Posts
530
Reaction score
926
Location
ND
First Name
Brian
Truck Year
1990
Truck Model
Suburban
Engine Size
350
700r4 would have me at approx 1800 rpm with 3.08s and 31s doing 75mph. Th400/th350 would be 2500 with the same setup at 75. Not sure which would be better. Unloaded I would probably be in OD a bit. But with the camper I would be 3rd, which is the same as the th trannys. I’ve been wanting to get a 6 lug 14bsf with 3.73s and regear the front to match. 3.73s with a 700 would be 2100 in od at 75mph. That sounds like the sweet spot to me. What year range 700 is desirable. Was it offered with a np205 or will it be easier/cheaper to get a 208 setup. The non electronic 4l60 any better than a 700 or is it the same thing. Any easier to get? Sorry for so many questions. Thanks

Definitely should re-gear it, especially if you are doing any towing. I don't think the np205 was ever offered with a 700R4. Ideally, looking for a 4L80E would be the best towing friendly OD transmission.
 

hunters628

Full Access Member
Joined
Sep 10, 2019
Posts
237
Reaction score
203
Location
Ellensburg Washington
First Name
Hunter
Truck Year
1982
Truck Model
K10
Engine Size
305
What engine controller do you plan to use with the 5.3? Is it capable of controlling a 4L60E? If so, that would be the way to go.
I’m using the stock ecu. I already had the vats and trans control deleted. I got a 4l60e with the motor but is was trashed apparently so I prematurely took it to the junkyard since I don’t have much room to keep it. My garage is barely big enough for my truck.
 

hunters628

Full Access Member
Joined
Sep 10, 2019
Posts
237
Reaction score
203
Location
Ellensburg Washington
First Name
Hunter
Truck Year
1982
Truck Model
K10
Engine Size
305
Definitely should re-gear it, especially if you are doing any towing. I don't think the np205 was ever offered with a 700R4. Ideally, looking for a 4L80E would be the best towing friendly OD transmission.
I just worked out a trade for a th400/208 combo along with a tilt auto column pedal set and some other body parts I needed so I will be using that trans now. Maybe in the future I’ll get an 80e. But for now this will do for my purposes!
 

Latest posts

Forum statistics

Threads
41,859
Posts
903,668
Members
33,372
Latest member
83elcowes
Top