Big Block Radiator Hold-Downs

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

JoeR Jr

Full Access Member
Joined
Jun 23, 2018
Posts
191
Reaction score
241
Location
Stokesdale, NC
First Name
Joe
Truck Year
1986
Truck Model
C10
Engine Size
6.0/4L80E
What radiator hold downs is everyone using when they swap a big block radiator into their C10?
After adding AC to my truck my stock radiator wasn't doing the job. I added the Big Block radiator from an 85 C10 and installed a set of electric fans from a Windstar. I fabbed up a set of mounts for the fans but I'd like to use the factory hold-downs for the radiator.
GM doesn't make them any more.
Every scrap yard near me doesn't have them.
I can't find an aftermarket source for them, but there must be one. I see a bunch of folks running them, and I'm pretty sure the trucks weren't all born with them.
Can someone please point me in the right direction?
Thx,
Joo
 

yevgenievich

Full Access Member
Joined
Mar 1, 2014
Posts
4,781
Reaction score
3,298
Location
Texas
First Name
Viktor
Truck Year
sad
Truck Model
very sad
Engine Size
less sad
I extended a set of factory mounts when doing install on my old suburban
 

nvrenuf

Full Access Member
Joined
Jul 30, 2010
Posts
1,684
Reaction score
1,867
Location
Mobile, Al.
First Name
John
Truck Year
1991
Truck Model
K5
Engine Size
454
As far as I know, now one makes reproduction brackets. Used is likely your best option.
 

disenough

Full Access Member
Joined
Sep 1, 2011
Posts
62
Reaction score
121
Location
Rock Hill SC
First Name
brice
Truck Year
1986
Truck Model
k10
Engine Size
350
I welded 2 sets of small block hold downs together and a 1/4 inch spacer underneath them.
You must be registered for see images attach
 

JoeR Jr

Full Access Member
Joined
Jun 23, 2018
Posts
191
Reaction score
241
Location
Stokesdale, NC
First Name
Joe
Truck Year
1986
Truck Model
C10
Engine Size
6.0/4L80E
As far as I know, now one makes reproduction brackets. Used is likely your best option.

That's crummy. Thanks though.

I welded 2 sets of small block hold downs together and a 1/4 inch spacer underneath them.
You must be registered for see images attach

Perfect! That's totally do-able. I know where to find a set of those, I think.
Joe
 

disenough

Full Access Member
Joined
Sep 1, 2011
Posts
62
Reaction score
121
Location
Rock Hill SC
First Name
brice
Truck Year
1986
Truck Model
k10
Engine Size
350
I did use new rubber pads for a big block radiator.
I know you didn't use your shroud but just to help
others I used the small block shroud with a little trimming .
 

JoeR Jr

Full Access Member
Joined
Jun 23, 2018
Posts
191
Reaction score
241
Location
Stokesdale, NC
First Name
Joe
Truck Year
1986
Truck Model
C10
Engine Size
6.0/4L80E
Today I ordered a set of 350 hold downs from LMC. I'll stretch them to fit when they arrive. I also ordered the correct rubbers for the big block radiator.
Joe
 

PrairieDrifter

Full Access Member
Joined
Dec 28, 2014
Posts
3,421
Reaction score
4,480
Location
North Dakota
First Name
Mason
Truck Year
84,79,77,70,48
Truck Model
Suburban k10, bonanza k10, c30 C&C, c10, gmc 1/2ton
Engine Size
350, 350, 350, 350, 350
Brothers truck has the one piece hold down I believe, I would prefer that anyways.
 

yevgenievich

Full Access Member
Joined
Mar 1, 2014
Posts
4,781
Reaction score
3,298
Location
Texas
First Name
Viktor
Truck Year
sad
Truck Model
very sad
Engine Size
less sad
You must be registered for see images attach

These were extended with some flat stock that I had
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
28,956
Reaction score
23,467
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
My big block trucks have all had one big upper panel that retains the radiator, rather than the two little individual mounts used on the small block trucks with smaller radiator. And I believe the two individual mounts were only used in the '81-up trucks.
 

Bextreme04

Full Access Member
Joined
May 13, 2019
Posts
4,135
Reaction score
4,984
Location
Oregon
First Name
Eric
Truck Year
1980
Truck Model
K25
Engine Size
350-4bbl
#32-0984 is what my 80 K25 350/400/205 with A/C came with from the factory. It is the large 4-core radiator and has the solid bracket across the top as shown in that LMC diagram.
 

Catbox

Full Access Member
Joined
Jul 12, 2018
Posts
3,968
Reaction score
14,481
Location
Just Outside of Portland Oregon
First Name
Peter
Truck Year
1979
Truck Model
C20 Silverado Camper Special
Engine Size
461
My big block has the large retainer across the top of the radiator.
As seen below...

You must be registered for see images attach
 

nvrenuf

Full Access Member
Joined
Jul 30, 2010
Posts
1,684
Reaction score
1,867
Location
Mobile, Al.
First Name
John
Truck Year
1991
Truck Model
K5
Engine Size
454
It’s a year model thing, as stated ‘81+.

I’ve got a CUCV radiator set up on my ‘91 Blazer, 2 small brackets with a plastic cover that goes between them.

You must be registered for see images attach
 

Paladin

"Teufelshunde"
Joined
Jan 1, 2018
Posts
1,726
Reaction score
6,059
Location
Wichita Falls, Texas
First Name
Mike
Truck Year
1985
Truck Model
C30 Silverado Crew Cab Dually
Engine Size
468
One big plate as Bucket said. :cheers:
You must be registered for see images attach
 

Latest posts

Forum statistics

Threads
41,852
Posts
903,534
Members
33,365
Latest member
rossivey
Top