Quick Question about coolant temperature senders/ sensors

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

DanMcG

Full Access Member
Joined
Jun 28, 2014
Posts
1,076
Reaction score
1,881
Location
Central NY
First Name
Dan
Truck Year
1978 1985
Truck Model
k10 k10
Engine Size
400 350
My sender is bad and needs replacing, I need to order one but don't want to pull the old one until I have the new one in hand (and it stops raining) but I see they have two sizes, 1/2"-14 and 3/8"-18. Is there any way to tell which one it could be? the motor is a 86 warranty 350 block in my 85 k10. And a 13/16 socket fits on it.
I'm guessing it's the larger 1/2" size but I'd probably be wrong.

Thanks
 

F-64

Full Access Member
Joined
Jan 11, 2020
Posts
112
Reaction score
89
Location
nyc
First Name
mike
Truck Year
1987
Truck Model
R10 lwb
Engine Size
5.7 tbi stock
I only see the 3/8 offered for an 86 350.
Buy both from your local store and return the one you don't need.
 

chengny

Full Access Member
Joined
Feb 22, 2012
Posts
4,086
Reaction score
1,008
Location
NH
First Name
Jerry
Truck Year
1986
Truck Model
K3500
Engine Size
350/5.7
My sender is bad and needs replacing, I need to order one but don't want to pull the old one until I have the new one in hand (and it stops raining) but I see they have two sizes, 1/2"-14 and 3/8"-18. Is there any way to tell which one it could be? the motor is a 86 warranty 350 block in my 85 k10. And a 13/16 socket fits on it.
I'm guessing it's the larger 1/2" size but I'd probably be wrong.

Thanks


As info; 1/2 NPT is very close to 11/16" in diameter and 3/8 NPT is just about 9/16" diameter. You should be able to use an open end wrench of each of those sizes to gauge the body of the sensor - and make a good educated guess.
 

75gmck25

Full Access Member
Joined
Oct 13, 2016
Posts
2,018
Reaction score
1,811
Location
Northern Virginia
First Name
Bruce
Truck Year
1975
Truck Model
K25 Camper Special TH350 NP203
Engine Size
5.7
Based on my experience, the 1/2” thread is much more common. I had the smaller sending unit in an a old late 70’s block, and in some new aluminum heads, but all the newer heads used the larger sending unit.

Also check carefully to ensure the new sending unit has the right resistance for your gauge. It took me quite a while to find the right one for my ‘75. All the ones for newer trucks made the gauge read much too low. The correct one puts my gauge at just above the 1/4 mark at about 180-185 degrees.

Bruce
 

DanMcG

Full Access Member
Joined
Jun 28, 2014
Posts
1,076
Reaction score
1,881
Location
Central NY
First Name
Dan
Truck Year
1978 1985
Truck Model
k10 k10
Engine Size
400 350
Also check carefully to ensure the new sending unit has the right resistance for your gauge.
Bruce

How does one find that information? I haven't seen it offered on any of the sensors I've looked at.
 

DanMcG

Full Access Member
Joined
Jun 28, 2014
Posts
1,076
Reaction score
1,881
Location
Central NY
First Name
Dan
Truck Year
1978 1985
Truck Model
k10 k10
Engine Size
400 350
Looks like the rains will be letting up today so I'll just pull the old one now. Thank you all for the advice
 

75gmck25

Full Access Member
Joined
Oct 13, 2016
Posts
2,018
Reaction score
1,811
Location
Northern Virginia
First Name
Bruce
Truck Year
1975
Truck Model
K25 Camper Special TH350 NP203
Engine Size
5.7
Finding the resistance information is a real easter egg hunt and I've lost track of all the references I tracked down.

It looks like the right one for your truck is 3/8" NPT, and its an Standard Motor Products TS76, which should cross-reference to a GM 8993164.

Bruce
 

DanMcG

Full Access Member
Joined
Jun 28, 2014
Posts
1,076
Reaction score
1,881
Location
Central NY
First Name
Dan
Truck Year
1978 1985
Truck Model
k10 k10
Engine Size
400 350
Thanks Bruce, I just got done pulling it and it was a 3/8 (.657) and now have the TS76 on order from Rock Auto.
 

Latest posts

Forum statistics

Threads
41,857
Posts
903,627
Members
33,370
Latest member
mitchell1128
Top