Running a power line to the rear of the truck
- Thread starter AuroraGirl
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
highdesertrange
Full Access Member
- Joined
- Dec 19, 2013
- Posts
- 1,066
- Reaction score
- 211
- Location
- kalifornia
- First Name
- mike
- Truck Year
- 1978
- Truck Model
- k30
- Engine Size
- 454
it's impossible to say what gauge will work because we don't know the end power consumption. any guess before we have a for sure number is just speculation.
x2 on the marine cable. Ancor is top notch.
highdesertranger
x2 on the marine cable. Ancor is top notch.
highdesertranger
AuroraGirl
Full Access Member
- Joined
- Sep 8, 2019
- Posts
- 9,206
- Reaction score
- 6,186
- Location
- Northern Wisconsin
- First Name
- Taylor
- Truck Year
- 1978, 1980
- Truck Model
- K10, K25
- Engine Size
- 400(?), 350
The most it would power at once is a winch. Nothing over 10k pounds. Mostly for dragging stuff onto a trailer. The power might go to a winch I keep for the truck or my winch on the trailer(trailer winch is 6k i believe, it has a busted remote and my grandpa put it in the shed. thank god.)
Blue Ox
Turning Diesel Fuel Into Fun
- Joined
- Mar 27, 2018
- Posts
- 4,873
- Reaction score
- 10,771
- Location
- LI-NY
- First Name
- Derek
- Truck Year
- MCMLXXXV
- Truck Model
- K20HD
- Engine Size
- 6.2L
There should be a data plate on the winches that will tell you how many amps they draw. You'll need that info to verify the wire size. Although I'd be surprised if they draw over 30 Amps.
highdesertrange
Full Access Member
- Joined
- Dec 19, 2013
- Posts
- 1,066
- Reaction score
- 211
- Location
- kalifornia
- First Name
- mike
- Truck Year
- 1978
- Truck Model
- k30
- Engine Size
- 454
Blue ox with all due respect. I have no idea where you got that info, maybe an ATV winch.
any of your larger winches draw in excess of 400 amps. like almost 500. if it draws that much it's better to place an aux battery near the winch and use the wire for charging that battery. but again I am just speculating because I don't have hard numbers.
highdesertranger
any of your larger winches draw in excess of 400 amps. like almost 500. if it draws that much it's better to place an aux battery near the winch and use the wire for charging that battery. but again I am just speculating because I don't have hard numbers.
highdesertranger
Matt69olds
Full Access Member
- Joined
- Jan 8, 2018
- Posts
- 2,345
- Reaction score
- 3,590
- Location
- Central Indiana
- First Name
- Matt
- Truck Year
- 81
- Truck Model
- GMC 1/2 ton
- Engine Size
- 455 Olds
A 10k winch with the motor approaching stall can pull the same current as a starter motor.
AuroraGirl
Full Access Member
- Joined
- Sep 8, 2019
- Posts
- 9,206
- Reaction score
- 6,186
- Location
- Northern Wisconsin
- First Name
- Taylor
- Truck Year
- 1978, 1980
- Truck Model
- K10, K25
- Engine Size
- 400(?), 350
So a winch pulling that juice would melt a 2 gauge or start getting real hot at that distance, yes? Unless Im misunderstanding the physical size of 2 gauge wire visually compared to say, a positive from battery to solenoid.
- Joined
- Oct 30, 2019
- Posts
- 2,870
- Reaction score
- 6,445
- Location
- Downingtown, PA
- First Name
- Wayne
- Truck Year
- 1974
- Truck Model
- Jimmy
- Engine Size
- 350
2 gauge is larger/thicker than 4 gauge. Most vehicles currently have either 2 or 4 gauge battery cables. Diesel engines in a medium duty truck will have 2/0 or larger, which stands for double zero. This cable is three sizes larger than 2 gauge.
Tail lights will have 16 or 18 gauge wire, much smaller. Here is a chart:
https://en.wikipedia.org/wiki/American_wire_gauge
Tail lights will have 16 or 18 gauge wire, much smaller. Here is a chart:
https://en.wikipedia.org/wiki/American_wire_gauge
dvdswan
Full Access Member
- Joined
- Mar 11, 2014
- Posts
- 2,366
- Reaction score
- 2,024
- Location
- Port Orchard, WA
- First Name
- Dave
- Truck Year
- 1978
- Truck Model
- K10
- Engine Size
- 350
I would suggest also placing a connector on the end for when not in use to protect it from the elements. Similare to this...
You must be registered for see images attach
Blue Ox
Turning Diesel Fuel Into Fun
- Joined
- Mar 27, 2018
- Posts
- 4,873
- Reaction score
- 10,771
- Location
- LI-NY
- First Name
- Derek
- Truck Year
- MCMLXXXV
- Truck Model
- K20HD
- Engine Size
- 6.2L
Well, color me surprised. I never owned an electric winch so I was just guessing. But I did say to look for the data plate so we would have the correct amperage to work with.
Snoots
Full Access Member
- Joined
- Jan 23, 2013
- Posts
- 8,179
- Reaction score
- 16,010
- Location
- Georgia
- First Name
- Roger
- Truck Year
- 1973
- Truck Model
- Jimmy Sierra
- Engine Size
- 350
Most folks that commonly use a winch have a 2 battery system, do not use a breaker, fuse or relay and almost always use 2/0 wires.
The max amps I've seen drawn are 370 but those are 'stated' numbers not actual.
You don't want any extra wire. I do like @dvdswan suggestion of disconnects tho.
The max amps I've seen drawn are 370 but those are 'stated' numbers not actual.
You don't want any extra wire. I do like @dvdswan suggestion of disconnects tho.
Matt69olds
Full Access Member
- Joined
- Jan 8, 2018
- Posts
- 2,345
- Reaction score
- 3,590
- Location
- Central Indiana
- First Name
- Matt
- Truck Year
- 81
- Truck Model
- GMC 1/2 ton
- Engine Size
- 455 Olds
The wire may not melt, but it would definitely get hot. Not to mention the voltage drop would be high enough the winch would run pretty slow. The more current, the bigger the cable needs to be. Make the power cable longer, the wire size needs to increase to keep this equal.
AuroraGirl
Full Access Member
- Joined
- Sep 8, 2019
- Posts
- 9,206
- Reaction score
- 6,186
- Location
- Northern Wisconsin
- First Name
- Taylor
- Truck Year
- 1978, 1980
- Truck Model
- K10, K25
- Engine Size
- 400(?), 350
So maybe if I want to do this I should run a 0 gauge? Or 2/0? ID rather not run an aux. battery. Unless a deep cell can provide enough juice for a while, which I have doubts about.
AuroraGirl
Full Access Member
- Joined
- Sep 8, 2019
- Posts
- 9,206
- Reaction score
- 6,186
- Location
- Northern Wisconsin
- First Name
- Taylor
- Truck Year
- 1978, 1980
- Truck Model
- K10, K25
- Engine Size
- 400(?), 350
Would perhaps running a smaller capacity winch(slower, yes) with pulley system help with amp load?
Im almost considering haveing a quick line in the engine bay of my OTHER truck and park it near my square while doing a heavy winching job, being able to provide that power from a high output alternator and another battery over a matter of a couple feet rather than the length of the truck.
Im almost considering haveing a quick line in the engine bay of my OTHER truck and park it near my square while doing a heavy winching job, being able to provide that power from a high output alternator and another battery over a matter of a couple feet rather than the length of the truck.
Matt69olds
Full Access Member
- Joined
- Jan 8, 2018
- Posts
- 2,345
- Reaction score
- 3,590
- Location
- Central Indiana
- First Name
- Matt
- Truck Year
- 81
- Truck Model
- GMC 1/2 ton
- Engine Size
- 455 Olds
If your determined to run that much current to the back of the truck, I’d get the biggest deep cycle battery you can find. Don’t base your purchase on CCA ratings, look at the reserve capacity. That’s how long a fully charged battery can provide a constant 25 amp load, and not drop below 12volts. If your worried about the battery providing enough current, run 2 batteries.
Similar threads
