Question about vintage air

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

79 red sled

Junior Member
Joined
Nov 9, 2019
Posts
21
Reaction score
7
Location
Kauai Hawaii
First Name
Bernard
Truck Year
1979
Truck Model
K10
Engine Size
383
I’m building a 1979 k10. It’s a non factory A/C truck and I want to put a vintage air system in it. My truck has two manual air vents by the kick panel. I noticed that the trucks with factory A/C doesn’t have that. Do I need to replace those panels or can I keep the air vents?
 

eskimomann209

Full Access Member
Joined
Jan 9, 2019
Posts
1,849
Reaction score
1,998
Location
Modesto
First Name
Marcus
Truck Year
1973
Truck Model
C10
Engine Size
5.3
@78C10BigTen
Omg he asked a VA question!!! Post the video! Post it post it posit it! Woooooooo

Those vents are still there. They’re just controlled by a vacuum to open and close the door on the passenger side. But there isn’t one in the driver side. I don’t think VA uses then at all. But they’re cool to have still.
 

78C10BigTen

Full Access Member
Joined
Apr 12, 2017
Posts
15,475
Reaction score
23,679
Location
pennsylvannia
First Name
Ted
Truck Year
1978
Truck Model
C10 BIG TEN
Engine Size
350
@78C10BigTen
Omg he asked a VA question!!! Post the video! Post it post it posit it! Woooooooo

Those vents are still there. They’re just controlled by a vacuum to open and close the door on the passenger side. But there isn’t one in the driver side. I don’t think VA uses then at all. But they’re cool to have still.
I will on my break when i have a minute
 

TubeTruck

I'm from Boston. Deal with it.
Joined
Sep 4, 2019
Posts
1,417
Reaction score
2,135
Location
East TN
First Name
Denis
Truck Year
1978
Truck Model
Suburban K10
Engine Size
LQ9
I want to see this video now lol
 

79 red sled

Junior Member
Joined
Nov 9, 2019
Posts
21
Reaction score
7
Location
Kauai Hawaii
First Name
Bernard
Truck Year
1979
Truck Model
K10
Engine Size
383
Ok so I need to order new vent panels for both sides because the ones I have are in bad shape but the passenger side gets the air vent baffle that replaces The manual vent? I’m ordering it from LMC if that makes a difference
 

Craig 85

Full Access Member
Joined
Jan 25, 2017
Posts
3,889
Reaction score
4,024
Location
Nashville, TN
First Name
Craig
Truck Year
1985
Truck Model
K30 SRW
Engine Size
454/TH-400/NP205
You can keep the vents. VA kits draw air from inside the cab. On factory A/C trucks the right vent is used to switch between fresh air on all modes, but Max A/C which recirculates air.

The vent doors from LMC are for non-A/C trucks only. The tabs welded on them are incorrect for an A/C truck.

Here's the install instruction for the Sure Fit Series.
https://www.vintageair.com/instructions_pdf/751175.pdf
 

eskimomann209

Full Access Member
Joined
Jan 9, 2019
Posts
1,849
Reaction score
1,998
Location
Modesto
First Name
Marcus
Truck Year
1973
Truck Model
C10
Engine Size
5.3
I used the Usa1 vents. I put them in the Resto sound panels. I felt the fit ok
 

79 red sled

Junior Member
Joined
Nov 9, 2019
Posts
21
Reaction score
7
Location
Kauai Hawaii
First Name
Bernard
Truck Year
1979
Truck Model
K10
Engine Size
383
Ok thanks a lot guys hopefully everything goes smoothly.
 

eskimomann209

Full Access Member
Joined
Jan 9, 2019
Posts
1,849
Reaction score
1,998
Location
Modesto
First Name
Marcus
Truck Year
1973
Truck Model
C10
Engine Size
5.3
Ok thanks a lot guys hopefully everything goes smoothly.
I helped some kid in my neck of the woods install a 4 link. He said the VA kit kicked his ass. Had a hell of a time getting the evaporator into position. I asked him if he unbolted the lower sides of the dash and he said he didn’t. I dunno if that’s recommended in the instructions. But I’d think it should help
 

bluex

Full Access Member
Joined
May 9, 2013
Posts
1,833
Reaction score
2,121
Location
Spartanburg SC
First Name
Paul
Truck Year
1978
Truck Model
C15
Engine Size
350
I left my floor vents in. The pass side one when open will blow air directly on the case of the VA unit an then redirect it straight into your face. The Dr side one is still very useful but make sure your floor is clean if your going to use the passenger side one lol.
 

bluex

Full Access Member
Joined
May 9, 2013
Posts
1,833
Reaction score
2,121
Location
Spartanburg SC
First Name
Paul
Truck Year
1978
Truck Model
C15
Engine Size
350
I helped some kid in my neck of the woods install a 4 link. He said the VA kit kicked his ass. Had a hell of a time getting the evaporator into position. I asked him if he unbolted the lower sides of the dash and he said he didn’t. I dunno if that’s recommended in the instructions. But I’d think it should help

I didn't have very much trouble with it. I put it in without moving the metal part of the dash but I did have the pad off. I had my 8 y/o start the screws on the firewall side while I did the ones inside. It was tricky but not really a big deal.
 

MikeB

Full Access Member
Joined
Apr 4, 2014
Posts
1,745
Reaction score
935
Location
Justin, TX
First Name
Mike
Truck Year
1969
Truck Model
C10
Engine Size
355
Kick panel vents aren't affected if you get the kit for non A/C trucks. I would sure shop around. But no matter who you buy from, V/A will give you great tech support.
 

roundhouse

Full Access Member
Joined
Apr 5, 2014
Posts
669
Reaction score
527
Location
atlanta ga
First Name
justin
Truck Year
77,78,79,80 ?
Truck Model
K10
Engine Size
350
We got our VA kit from Rutters Rod Shop in NC

Also the instructions for installing the evaporator are total garbage

We did not use the spacers that come with the kit

And just leave all the bolts loose for the bracket that bolts to the evap core
And Install it and then find a way to tighten them
It’s a pain , but it’s doable

If you tighten them first , you will never get them lined up with the holes on the firewall

Just get the block off panels for the vents
Once you have ice cold AC you won’t miss em

It’s a good kit , going to add one in our 65 falcon wagon
 

clendon1

Member
Joined
Aug 3, 2017
Posts
32
Reaction score
29
Location
Polk City FL
First Name
Butch
Truck Year
1976
Truck Model
c10 stepside
Engine Size
468 BB
When I installed VA in my '76 I kept the manual vent on the drivers side and used the block off on the pass side, I believe it came in the kit.
 

Latest posts

Forum statistics

Threads
41,848
Posts
903,413
Members
33,362
Latest member
Dhatch84
Top