TomC
Junior Member
- Joined
- Oct 2, 2019
- Posts
- 11
- Reaction score
- 0
- Location
- Washington
- First Name
- Tom
- Truck Year
- 1981
- Truck Model
- K20
- Engine Size
- 350
so i want to install a headliner in my non-AC 81 burb. They don’t make a non-AC headliner.
For anyone that has installed the AC headliner, do you think I could patch back in the rear cut out area and then re-skin the headliner?
Second question, my burb never had a headliner so there is no trim etc. is there trim required? If so could you take a pic of it and the rear cut out area? That would be very helpful.
I’m also thinking of using 1/8th paneling as a backer and covering that, and installing with some type of trimmed joint at the cross bows. Anyone done something like that?
For anyone that has installed the AC headliner, do you think I could patch back in the rear cut out area and then re-skin the headliner?
Second question, my burb never had a headliner so there is no trim etc. is there trim required? If so could you take a pic of it and the rear cut out area? That would be very helpful.
I’m also thinking of using 1/8th paneling as a backer and covering that, and installing with some type of trimmed joint at the cross bows. Anyone done something like that?
