Bed tie downs?

Ive got the ones that go in the stake pockets and dont retract. The use a toggle bolt and i have a piece of diamond plate under each one. Only pic i can find. I only have 4 due to my in-bed tool box covering the front 2 holes.

Doppleganger said:

Happen to know the PN for these? Ones I used to use is NLA (for square bodies). Want to get a couple sets for mine. Hoping they just changed the PN is all - or maybe its an application they dont list.

Click to expand...

I will look and see if i can find the part number for you.

Doppleganger said:

Happen to know the PN for these? Ones I used to use is NLA (for square bodies). Want to get a couple sets for mine. Hoping they just changed the PN is all - or maybe its an application they dont list.

Click to expand...

Hey Doppleganger,
I contacted Bullring USA and the guy says its part 4001 but i will look for a receipt when i get home later. FYI: the yellow part underneath was a little snug getting through the stake hole.

bravo16 said:

Hey Doppleganger,
I contacted Bullring USA and the guy says its part 4001 but i will look for a receipt when i get home later. FYI: the yellow part underneath was a little snug getting through the stake hole.

You must be registered for see images attach

Click to expand...

Awesome! Thanks dude!

Not on my square, but I like these. With a long 1/4" nylon rope and some truckers knots, you can get any load tied down to where it is part of the bed of the truck. Want to play a tune on the ropes, pick away at the various strands. Grab the load and try to move it and the whole truck moves. Great system. Where to get them? Good question, I cannot find them anymore, but I'm sure they're still out there.

Doppleganger said:

Awesome! Thanks dude!

Click to expand...

I found my receipt from Autozone, part number 31460, found this pic online.