Single wire temperature sensor versus two wire sensor

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Kirk T

Member
Joined
Feb 1, 2019
Posts
33
Reaction score
7
Location
Georgia
First Name
Kirk
Truck Year
1985
Truck Model
K-10
Engine Size
5.0 V-8
I bought a new coolant temp sensor (it is a two wire connector) and went to put it in and realized the sensor in the truck only had one wire. If I use the new sensor which wire do I use and what happens to the other wire. Should I just take it back and try to find a one wire sensor?
 

chengny

Full Access Member
Joined
Feb 22, 2012
Posts
4,086
Reaction score
1,008
Location
NH
First Name
Jerry
Truck Year
1986
Truck Model
K3500
Engine Size
350/5.7
I bought a new coolant temp sensor (it is a two wire connector) and went to put it in and realized the sensor in the truck only had one wire. If I use the new sensor which wire do I use and what happens to the other wire. Should I just take it back and try to find a one wire sensor?

Did you miss this:

Don't even try to use that coolant temp sensor. Coolant sensors with two leads are used to provide coolant temperature to the ECM. It won't drive your dash temp gauge.
 

75gmck25

Full Access Member
Joined
Oct 13, 2016
Posts
2,017
Reaction score
1,808
Location
Northern Virginia
First Name
Bruce
Truck Year
1975
Truck Model
K25 Camper Special TH350 NP203
Engine Size
5.7
One wire sensors are grounded through the threads in the head, and the terminal is where you connect the sensor wire. You can't substitute a two wire sensor and get it to work.

GM also changed the sensor/gauge combo a few times over the years, so its critical to get the correct sensor for your year of instrument cluster. If you get the wrong sensor it will still work, but the gauge will be off. There are also two types of terminals on the sensor wires: button type, where you slide the insulated wire connector on at a right angle to the sensor, and spade type, where the terminal sticks straight out from the top of the sensor.

Bruce
 

Kirk T

Member
Joined
Feb 1, 2019
Posts
33
Reaction score
7
Location
Georgia
First Name
Kirk
Truck Year
1985
Truck Model
K-10
Engine Size
5.0 V-8
Thank you that is good to know. My old sensor was what you called a button type where the wire attached at a right angle. I'll try to get on of those.

Thank you again
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
28,956
Reaction score
23,465
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
Did you miss this:

Don't even try to use that coolant temp sensor. Coolant sensors with two leads are used to provide coolant temperature to the ECM. It won't drive your dash temp gauge.

I've got one being used as a gauge sender, it was cobbled by the last owner. One wire just gets grounded out. It has always seemed to read properly.

But the correct sender makes more sense.
 

chengny

Full Access Member
Joined
Feb 22, 2012
Posts
4,086
Reaction score
1,008
Location
NH
First Name
Jerry
Truck Year
1986
Truck Model
K3500
Engine Size
350/5.7
I've got one being used as a gauge sender, it was cobbled by the last owner. One wire just gets grounded out. It has always seemed to read properly.

But the correct sender makes more sense.

Yeah, I was pretty sure it could be done...but I didn't want to confuse the issue
 

C10MixMaster

Full Access Member
Joined
Dec 6, 2016
Posts
756
Reaction score
1,420
Location
Kingman AZ
First Name
Ben
Truck Year
1977
Truck Model
C10 BIG10
Engine Size
ZZ4 350
COOLANT TEMPERATURE GAUGE PARAMETERS

For Truck Years: 1967 - 1973
The Temp Gauge Needle Should Point to:
Left Line (Cold) when sender resistance = 350 Ω
Middle Line when sender resistance = 76 Ω
Right Line (Hot) when sender resistance = 51 Ω

For Truck Years: 1974 - 1978
The Temp Gauge Needle Should Point to:
Left Line (Cold) when sender resistance = 350 Ω
Middle Line when sender resistance = 68 Ω
Right Line (Hot) when sender resistance = 46 Ω

For Truck Years: 1979 - 1990
The Temp Gauge Needle Should Point to:
Left Line (Cold) when sender resistance = 1,365 Ω
Middle Line when sender resistance = 96 Ω
Right Line (Hot) when sender resistance = 55 Ω

as you can see there are three different ohm ranges depending on the year. there are also 1/2" and 3/8" pipe threads so you need to match the size.
 
Last edited:

Matt69olds

Full Access Member
Joined
Jan 8, 2018
Posts
2,338
Reaction score
3,569
Location
Central Indiana
First Name
Matt
Truck Year
81
Truck Model
GMC 1/2 ton
Engine Size
455 Olds
Not all 2 terminal sensors are for the PCM. Some car/trucks have a temp gauge, and a temp light. One terminal is for the gauge, the other terminal is for the light.
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
28,956
Reaction score
23,465
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
Not all 2 terminal sensors are for the PCM. Some car/trucks have a temp gauge, and a temp light. One terminal is for the gauge, the other terminal is for the light.

The GM 60* V6 was one application for those, in various models. They had a pigtail with a plug on it, rather than having the plug right on the sender body.
 

Matt69olds

Full Access Member
Joined
Jan 8, 2018
Posts
2,338
Reaction score
3,569
Location
Central Indiana
First Name
Matt
Truck Year
81
Truck Model
GMC 1/2 ton
Engine Size
455 Olds
I have owned many G body cars over the years, mostly Olds. If they had the rally pac gauge setup, it had the light and the gauge. I’m sure I probably have a spare sensor and connector somewhere.

I’m really surprised GM (or other manufacturers) didn’t include a warning light in addition to the gauges. Most people don’t pay attention to any instruments other than the fuel gauge. A warning light is a little harder to ignore. I’m guessing it cost too much to have both.
 

Latest posts

Forum statistics

Threads
41,848
Posts
903,425
Members
33,362
Latest member
Dhatch84
Top