1 ton wheels on 1/2 ton truck?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

mrburitto

Full Access Member
Joined
Oct 20, 2018
Posts
168
Reaction score
190
Location
Casa Grande, AZ
First Name
Cody
Truck Year
1979
Truck Model
K20 Cheyenne Camper Special, C30 Crew Cab Dualy
Engine Size
350, 496
Instead of focusing on load rating (C, E...) look at how many pounds they can handle. All load range C tires do NOT have the same rating on how much weight they can handle. The bigger the tire, the more weight it can handle. Here is just some examples from BFG KO2 All Terrains... (all tires load range C)

LT235/75R15: 1,985 lbs
30X9.50R15: 1,990 lbs
31X10.50R15: 2,270 lbs
32X11.50R15: 2,535 lbs
33X10.50R15: 2,600 lbs

Figure all the ones listed above would fit on the rear of your truck. Also with these tires there is some sidewall tread to help protect it against punctures (and to help prevent getting stuck)

Have you ever weighed the truck with a full load of wood on it?


There you go, someone with an actual good suggestion. Even the load range E trailer tires I showed you were only like 2,800 lbs. This is a much better option. And if your worried about getting stuck in the snow get a winch. If your in the woods behind your house worst case you just winch it all the way home!
 

R8rPhan

Full Access Member
Joined
Feb 5, 2017
Posts
452
Reaction score
42
Location
California
First Name
Mark
Truck Year
1973 (1979?)
Truck Model
C10 long bed (Frankenstein truck)
Engine Size
307
Taller is better but not to wide. Wide pushes to much snow when it's deeper than a few inches.
As for breaking axles you can do that at any speed. If a tire slips then grabs when you have power in it u- joints and axles are weak in your truck. You have 10 bolt differentials I think. Not GMs best.


Not really planning on carry 'that' much load.. The problem I am faced with is that when I'm carrying a significant load, the passenger load rated tires available to me balloon out, exposing the sidewalls to sharp rocks, even the small ones (2 inch) that the logging companies like to put on the roads to prevent erosion and mud pits.... The tires have practically zero protection in the sidewalls...

I just want to be able to carry a cord of wood without worry...
 

R8rPhan

Full Access Member
Joined
Feb 5, 2017
Posts
452
Reaction score
42
Location
California
First Name
Mark
Truck Year
1973 (1979?)
Truck Model
C10 long bed (Frankenstein truck)
Engine Size
307
Instead of focusing on load rating (C, E...) look at how many pounds they can handle. All load range C tires do NOT have the same rating on how much weight they can handle. The bigger the tire, the more weight it can handle. Here is just some examples from BFG KO2 All Terrains... (all tires load range C)

LT235/75R15: 1,985 lbs
30X9.50R15: 1,990 lbs
31X10.50R15: 2,270 lbs
32X11.50R15: 2,535 lbs
33X10.50R15: 2,600 lbs

Figure all the ones listed above would fit on the rear of your truck. Also with these tires there is some sidewall tread to help protect it against punctures (and to help prevent getting stuck)

Have you ever weighed the truck with a full load of wood on it?


I have only been looking at how many pounds they can carry.. The local tire stores have only been able to offer me up to 2350 per tire... 2,600 might do it..

Maybe I'll look on line further for something I can buy and have installed locally..

I have no idea how I could weigh my truck around here..
 

fussfeld

Full Access Member
Joined
Mar 25, 2013
Posts
340
Reaction score
54
Location
east coast
First Name
j
Truck Year
83
Truck Model
c-10
Engine Size
4.3 v-6 262CID
There you go, someone with an actual good suggestion. Even the load range E trailer tires I showed you were only like 2,800 lbs. This is a much better option. And if your worried about getting stuck in the snow get a winch. If your in the woods behind your house worst case you just winch it all the way home!


i would like to officially withdraw from this thread.

Thank you for allowing me to participate thus far.
 

Frankenchevy

Proverbs 16:18
Joined
Jan 3, 2018
Posts
5,957
Reaction score
7,405
Location
USA
First Name
Jeremy
Truck Year
Square
Truck Model
CUCV
Engine Size
Small
I am pretty sure there were half tons that came with the 6.5 L diesel in the mid 90s that came with a five lug 14 bolt rear axle. Can’t say for sure if they were 15 or 16 inch rams. Being that it is a newer vehicle you may have better luck looking for something like that at the junkyard.
 

R8rPhan

Full Access Member
Joined
Feb 5, 2017
Posts
452
Reaction score
42
Location
California
First Name
Mark
Truck Year
1973 (1979?)
Truck Model
C10 long bed (Frankenstein truck)
Engine Size
307
I am pretty sure there were half tons that came with the 6.5 L diesel in the mid 90s that came with a five lug 14 bolt rear axle. Can’t say for sure if they were 15 or 16 inch rams. Being that it is a newer vehicle you may have better luck looking for something like that at the junkyard.


Posi/limited slip by any chance? I do want to put that on the truck at some point (same with my chevy van if I can ever figure out how to get cat converters for it that are affordable enough for the state to allow me to drive it again)
 

fussfeld

Full Access Member
Joined
Mar 25, 2013
Posts
340
Reaction score
54
Location
east coast
First Name
j
Truck Year
83
Truck Model
c-10
Engine Size
4.3 v-6 262CID
I think if you quit responding you don't have to withdraw your participation.

Yeah, but i wanted to rub it in that i was insulted that it was implied that my answer wasn't a "good suggestion." :D

Hey look, those cadillac ambulances MAY have had 5x5 wheels and thus you could put larger rubber on them since this was (the installation of a 14 bolt rear in a B-body) for commercial purposes.

Anyways, i'm officially done with the thread after this answer.

Thanks again.
 

fussfeld

Full Access Member
Joined
Mar 25, 2013
Posts
340
Reaction score
54
Location
east coast
First Name
j
Truck Year
83
Truck Model
c-10
Engine Size
4.3 v-6 262CID
i am going to temporarily suspend my withdrawl, only for a moment:

Not only do i withdraw from this thread, i CONDEMN this thread.:Angry:

Ok, NOW officially withdrawn from the thread.
 

idahovette

Full Access Member
Joined
Aug 7, 2016
Posts
6,537
Reaction score
14,033
Location
Weiser Idaho
First Name
Perry
Truck Year
1975-1979
Truck Model
K20-K10
Engine Size
350
i am going to temporarily suspend my withdrawl, only for a moment:

Not only do i withdraw from this thread, i CONDEMN this thread.:Angry:

Ok, NOW officially withdrawn from the thread.
Are your panties really in a *** or are you just funnin??
 

82sbshortbed

Fuckemall!!
Joined
Mar 1, 2018
Posts
14,815
Reaction score
49,066
Location
SE Texas
First Name
Doug
Truck Year
1982, 1984
Truck Model
1500 shortbed, 1500 longbed
Engine Size
454, 305
Drink a glass of prune juice and let that **** go. Thanks for letting us know that you're not participating in this thread again. :sleepy10:
 

CSFJ

-----------------
Supporting Member
Joined
Jul 1, 2014
Posts
6,160
Reaction score
5,162
Location
------
First Name
-------------
Truck Year
-------
Truck Model
-------
Engine Size
-------
i am going to temporarily suspend my withdrawl, only for a moment:

Not only do i withdraw from this thread, i CONDEMN this thread.:Angry:

Ok, NOW officially withdrawn from the thread.


I think this is what you meant to say

You must be registered for see images attach
 

Big Chip

Full Access Member
Joined
Oct 19, 2017
Posts
4,656
Reaction score
6,728
Location
Michigan
First Name
Kevin
Truck Year
1979
Truck Model
C35
Engine Size
454
I think this is what you meant to say

You must be registered for see images attach
Hahahahahahahahaha!!!!!!
 

Big Chip

Full Access Member
Joined
Oct 19, 2017
Posts
4,656
Reaction score
6,728
Location
Michigan
First Name
Kevin
Truck Year
1979
Truck Model
C35
Engine Size
454
I think he should stick with the electrical stuff or troubleshooting a squeaky belt if he gets that pissed about something that I'm not sure was even directed at him.
 

Latest posts

Forum statistics

Threads
42,068
Posts
908,343
Members
33,544
Latest member
Twistedgmt400
Top