How To Refurbish Your Dashpad

HotRodPC · Jun 9, 2014

MadOgre said:
BTW I PM d you about some picture issues im having Hotrodpc

Huh???

When I get back I'll check and see if I missed any messages. I didn't get an alert anyway, but I'll check my inbox. Sorry

MadOgre · Jun 9, 2014

Ok Thanks. just cant figure out how to upload pictures evertime a box pops up asking for URL ?

diaric · Jun 13, 2014

HotRodPC said:
That turned out fairly good. How does this end up being as far as weight?

Its probably ounces more than it was stock. The best fillers would probably be flexible stuff for bumpers but I didn't want to pay that kind of $$ to test how well it would work.

The only rough spot is the right hand corner where I didn't notice it wasn't blocked well. I might put a 6.2 emblem over it and no one will notice.

Test fit after fixing the edges, filling the cracks and sanding the foam down.

You must be registered for see images attach

Surface pretty much prepped for the final coat.

You must be registered for see images attach

garzas23 · Oct 17, 2014

Stroked said:
I originally intended to stop here, but I didn't like the finish on it. So, I went back to the hardware store(again) and bought a couple cans of Krylon Fusion satin black. This stuff is great because it will bond to darn near anything. They have a large selection of colors so you might be able to find one that matches your interior. Follow the directions on the can and paint right over the bedliner. If all goes well, you'll end up with this.

So you painted over the bedliner coat? Did you sand it over again also? Did you intend on doing it in that order with the first coat being a bed liner paint or was it that you just really didn't like it.

Stroked · Oct 17, 2014

garzas23 said:
So you painted over the bedliner coat? Did you sand it over again also? Did you intend on doing it in that order with the first coat being a bed liner paint or was it that you just really didn't like it.

Whew, this was a while back and I have a terrible memory. I intended on spraying the bedliner and leaving it at that. If I recall, the resulting finish was fairly rough and I figured dust would stick to it big time. Also I was hoping for a little more gloss.

No sanding. I just sprayed right over the bedliner and it's still holding up great.

I will add that it has another good sized crack in a completely different area from the original cracks. I suppose it's still crappy old hardened vinyl underneath so it's bound to keep doing it.

Chaplain · Nov 24, 2014

neginfluence04 · Nov 27, 2014

I gotta give this a try maybe I can mold a center channel in the dash pad

ADTrumble · Jul 13, 2015

Verry nice
Will b trying this verry soon
And may redo interior door panals the same way to get matching texture

steelburner83 · Aug 7, 2015

very nice fix for budget builders like myself, I might have to try this out sometime

Cheynemitt · Nov 22, 2015

I have a dash pad I'm starting to do myself. I will post pics

Darkrider · Jan 3, 2016

Hmmm Great thread! May have to give this a try if i cant find a decent pad in one of the many parts trucks i have access to. By cutting out the perforated areas for the corner speakers im wondering if it wouldnt be possible to fit some after market speakers in the stock corner locations now. From what i have read its usually the small tweeters on the after market speakers hitting the pad material that caused fitment problems. Your computer grille idea gets around that it seems...

yevgenievich · Jan 3, 2016

Darkrider said:
Hmmm Great thread! May have to give this a try if i cant find a decent pad in one of the many parts trucks i have access to. By cutting out the perforated areas for the corner speakers im wondering if it wouldnt be possible to fit some after market speakers in the stock corner locations now. From what i have read its usually the small tweeters on the after market speakers hitting the pad material that caused fitment problems. Your computer grille idea gets around that it seems...

I have used an overlay and cut the original speaker grilles out to fit speakers with small tweeters.

bucata206 · Jun 8, 2016

When you did this, did you use just the 2 part epoxy to make the surface even or did you have to put something over the epoxy?

justin71105 · Jan 23, 2017

Trying this out now, mine is pretty bad. Actually I cannot cut back far enough to reach vinyl that does not crack. Still going to attempt it, if it doesn't come out well enough I will order a replacement. So far I have sprayed some foam to find out i did not cut vinyl back enough. May just leave it brittle plastic weld cracks and spray a couple coats of krylon over it and see how it holds up.

You must be registered for see images attach

Sent from my SAMSUNG-SM-G930A using Tapatalk

84chevk10 · Jan 23, 2017

Mine looked like yours, I spent a ton of time on it but it actually cracked in 3 places moving it around.

How To Refurbish Your Dashpad

HotRodPC

Administrator

MadOgre

Full Access Member

diaric

Junior Member

garzas23

Full Access Member

Stroked

Full Access Member

Chaplain

Junior Member

neginfluence04

Full Access Member

ADTrumble

Member

steelburner83

Full Access Member

Cheynemitt

Junior Member

Darkrider

Full Access Member

yevgenievich

Full Access Member

bucata206

Full Access Member

justin71105

Junior Member

84chevk10

Full Access Member

Similar threads

Latest posts

Forum statistics